From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 14 Aug 2002 12:34:17 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 14 Aug 2002 12:34:17 -0400 Received: from mail.arcor.net ([145.253.32.2]:38876 "EHLO mail.arcor.net") by vger.kernel.org with ESMTP id ; Wed, 14 Aug 2002 12:34:16 -0400 X-Lotus-FromDomain: ARCOR From: Holger.Woehle@arcor.net To: linux-kernel@vger.kernel.org Message-ID: <41256C15.00613A82.00@ffm-hq-gtw01.Arcor.net> Date: Wed, 14 Aug 2002 18:37:31 +0100 Subject: sundance.o only two ports working Mime-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, i have a strange problem with two of my machines: They are identical P4 systems with Intel Chipset with two epro100 adapters onboard and a d-link dfe-580TX quad ethernet card. I am using Kernel 2.4.18 and sundance.o v1.07a 7/9/2002. The problem is, that i only can use the two first ports of the d-link card. I can set up all four with no problems according to mii-diag and alta-diag. Each port recognises link up/down and negotiates to the right speed and flowcontrol. But when i send traffic over the ports 4&5, at first nothing happens and of course i can't see any interrupts in /proc/interrupts eth4 eth5 and after a while i get the console message: eth4: Transmit timed out, status c0, resetting... Having a look at alta-diag i noticed, that the column " Interrupt status is..." differs between Index#1 / #2 and Index#3 / #4 Index#1 and #2 tells: Interrupt status is 0000: No interrupts pending. Index#3 and #4 tells: Interrupt status is 0101: Interrupt summary Link status changed and after genrating some traffic that line changes at Index#3 & #4 to: Interrupt status is 0301: Interrupt summary Link status changed Tx DMA done. The beehavier is identical on both machines. For better analysing i can send a file including cat /proc/pic, pci-config, alta-diag -e and alta-diag -m bevor and after sending some pings. This file is a some more pages long so i don't know if it is ok to send it to the mailing list. with regards Holger