From: Ruchira Revdekar <ruchira.revdekar@oss.qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Avaneesh Kumar Dwivedi <avaneesh.dwivedi@oss.qualcomm.com>,
Akash Kumar <akakum@qti.qualcomm.com>,
Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>,
Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>,
Vishnu Saini <vishsain@qti.qualcomm.com>,
Nirmesh Kumar Singh <nirmesh.singh@oss.qualcomm.com>,
akash.kumar@oss.qualcomm.com
Subject: Re: [PATCH v2 3/4] arm64: dts: qcom: talos: Add Talos Lyra EVK board
Date: Wed, 14 Oct 2026 17:12:43 +0530 [thread overview]
Message-ID: <413f66db-5089-4b3c-8afc-8d8083e80ddf@oss.qualcomm.com> (raw)
In-Reply-To: <ecuc74jw2pmgeijojvqayrnkntukzzyjlx7iq2iutovr7x2xkz@uvf2bd4o6pxi>
Hi Dmitry,
On 12-10-2026 17:29, Dmitry Baryshkov wrote:
> On Mon, Oct 12, 2026 at 11:46:28AM +0530, Ruchira Revdekar wrote:
>> From: Avaneesh Kumar Dwivedi <avaneesh.dwivedi@oss.qualcomm.com>
>>
>> Add the device tree for the Talos Lyra EVK platform which combines
>> the Talos Lyra EVK SoM and Lyra carrier board.
>>
>> This device tree adds board-specific peripheral configuration on top
>> of the SoM, including:
>>
>> - Native DisplayPort output
>> - GPIO expanders on i2c5
>> - SPI-attached TPM (ST33)
>> - USB host and peripheral controllers
>> - Power and reset keys
>>
>> Co-developed-by: Akash Kumar <akakum@qti.qualcomm.com>
>> Signed-off-by: Akash Kumar <akakum@qti.qualcomm.com>
>> Co-developed-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
>> Signed-off-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
>> Co-developed-by: Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>
>> Signed-off-by: Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>
>> Co-developed-by: Vishnu Saini <vishsain@qti.qualcomm.com>
>> Signed-off-by: Vishnu Saini <vishsain@qti.qualcomm.com>
>> Tested-by: Nirmesh Kumar Singh <nirmesh.singh@oss.qualcomm.com>
>> Signed-off-by: Avaneesh Kumar Dwivedi <avaneesh.dwivedi@oss.qualcomm.com>
>> Signed-off-by: Ruchira Revdekar <ruchira.revdekar@oss.qualcomm.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/talos-lyra-evk.dts | 137 ++++++++++++++++++++++++++++
>> 2 files changed, 138 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 88230c4e00ea..2f25575e6efe 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -456,6 +456,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-valve-deckard.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk.dtb
>>
>> talos-evk-el2-dtbs := talos-evk.dtb talos-el2.dtbo
>>
>> diff --git a/arch/arm64/boot/dts/qcom/talos-lyra-evk.dts b/arch/arm64/boot/dts/qcom/talos-lyra-evk.dts
>> new file mode 100644
>> index 000000000000..cfb563658fe0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/talos-lyra-evk.dts
>> @@ -0,0 +1,137 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +/dts-v1/;
>> +
>> +#include "talos-lyra-evk-som.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. QCS615 Talos lyra EVK";
>
> Is it 'lyra' or 'Lyra'?
>
Ack, it should be 'Lyra'. Will fix this in V3.
Thanks for the review.
Best regards,
Ruchira
next prev parent reply other threads:[~2026-10-14 11:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 6:16 [PATCH v2 0/4] Add support for " Ruchira Revdekar
2026-10-12 6:16 ` [PATCH v2 1/4] dt-bindings: arm: qcom: Add " Ruchira Revdekar
2026-10-12 11:24 ` Krzysztof Kozlowski
2026-10-13 9:32 ` Ruchira Revdekar
2026-10-13 9:34 ` Krzysztof Kozlowski
2026-10-14 12:09 ` Ruchira Revdekar
2026-10-12 6:16 ` [PATCH v2 2/4] arm64: dts: qcom: talos: Add Talos Lyra EVK SoM platform Ruchira Revdekar
2026-10-12 11:25 ` Krzysztof Kozlowski
2026-10-12 12:01 ` Dmitry Baryshkov
2026-10-12 6:16 ` [PATCH v2 3/4] arm64: dts: qcom: talos: Add Talos Lyra EVK board Ruchira Revdekar
2026-10-12 11:59 ` Dmitry Baryshkov
2026-10-14 11:42 ` Ruchira Revdekar [this message]
2026-10-12 12:02 ` Dmitry Baryshkov
2026-10-14 11:57 ` Nirmesh Kumar Singh
2026-10-12 6:16 ` [PATCH v2 4/4] arm64: dts: qcom: talos: Add EL2 overlay for talos-lyra-evk Ruchira Revdekar
2026-10-12 11:26 ` Krzysztof Kozlowski
2026-10-12 15:34 ` Ruchira Revdekar
2026-10-13 8:55 ` [PATCH v2 0/4] Add support for Talos Lyra EVK board Nirmesh Kumar Singh
2026-10-13 9:34 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=413f66db-5089-4b3c-8afc-8d8083e80ddf@oss.qualcomm.com \
--to=ruchira.revdekar@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=akakum@qti.qualcomm.com \
--cc=akash.kumar@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=avaneesh.dwivedi@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=khalid.ansari@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nirmesh.singh@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=vishnu.santhosh@oss.qualcomm.com \
--cc=vishsain@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®