From: Paolo Bonzini <pbonzini@redhat.com>
To: Thomas Gleixner <tglx@linutronix.de>,
LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, "Paul E. McKenney" <paulmck@kernel.org>,
Andy Lutomirski <luto@kernel.org>,
Alexandre Chartre <alexandre.chartre@oracle.com>,
Frederic Weisbecker <frederic@kernel.org>,
Sean Christopherson <sean.j.christopherson@intel.com>,
Masami Hiramatsu <mhiramat@kernel.org>,
Petr Mladek <pmladek@suse.com>,
Steven Rostedt <rostedt@goodmis.org>,
Joel Fernandes <joel@joelfernandes.org>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Juergen Gross <jgross@suse.com>, Brian Gerst <brgerst@gmail.com>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Josh Poimboeuf <jpoimboe@redhat.com>,
Will Deacon <will@kernel.org>
Subject: Re: [patch V4 part 2 17/18] x86/kvm/vmx: Move guest enter/exit into .noinstr.text
Date: Wed, 6 May 2020 10:17:06 +0200 [thread overview]
Message-ID: <414b554c-ba2c-c5b2-00bd-6c5222e54a82@redhat.com> (raw)
In-Reply-To: <20200505134341.781667216@linutronix.de>
On 05/05/20 15:41, Thomas Gleixner wrote:
> Move the functions which are inside the RCU off region into the
> non-instrumentable text section.
>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
> arch/x86/include/asm/hardirq.h | 4 -
> arch/x86/include/asm/kvm_host.h | 8 +++
> arch/x86/kvm/vmx/ops.h | 4 +
> arch/x86/kvm/vmx/vmenter.S | 5 +
> arch/x86/kvm/vmx/vmx.c | 105 ++++++++++++++++++++++------------------
> arch/x86/kvm/x86.c | 2
> 6 files changed, 79 insertions(+), 49 deletions(-)
>
> --- a/arch/x86/include/asm/hardirq.h
> +++ b/arch/x86/include/asm/hardirq.h
> @@ -67,12 +67,12 @@ static inline void kvm_set_cpu_l1tf_flus
> __this_cpu_write(irq_stat.kvm_cpu_l1tf_flush_l1d, 1);
> }
>
> -static inline void kvm_clear_cpu_l1tf_flush_l1d(void)
> +static __always_inline void kvm_clear_cpu_l1tf_flush_l1d(void)
> {
> __this_cpu_write(irq_stat.kvm_cpu_l1tf_flush_l1d, 0);
> }
>
> -static inline bool kvm_get_cpu_l1tf_flush_l1d(void)
> +static __always_inline bool kvm_get_cpu_l1tf_flush_l1d(void)
> {
> return __this_cpu_read(irq_stat.kvm_cpu_l1tf_flush_l1d);
> }
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -1601,7 +1601,15 @@ asmlinkage void kvm_spurious_fault(void)
> insn "\n\t" \
> "jmp 668f \n\t" \
> "667: \n\t" \
> + "1: \n\t" \
> + ".pushsection .discard.instr_begin \n\t" \
> + ".long 1b - . \n\t" \
> + ".popsection \n\t" \
> "call kvm_spurious_fault \n\t" \
> + "1: \n\t" \
> + ".pushsection .discard.instr_end \n\t" \
> + ".long 1b - . \n\t" \
> + ".popsection \n\t" \
> "668: \n\t" \
> _ASM_EXTABLE(666b, 667b)
>
> --- a/arch/x86/kvm/vmx/ops.h
> +++ b/arch/x86/kvm/vmx/ops.h
> @@ -146,7 +146,9 @@ do { \
> : : op1 : "cc" : error, fault); \
> return; \
> error: \
> + instr_begin(); \
> insn##_error(error_args); \
> + instr_end(); \
> return; \
> fault: \
> kvm_spurious_fault(); \
> @@ -161,7 +163,9 @@ do { \
> : : op1, op2 : "cc" : error, fault); \
> return; \
> error: \
> + instr_begin(); \
> insn##_error(error_args); \
> + instr_end(); \
> return; \
> fault: \
> kvm_spurious_fault(); \
> --- a/arch/x86/kvm/vmx/vmenter.S
> +++ b/arch/x86/kvm/vmx/vmenter.S
> @@ -27,7 +27,7 @@
> #define VCPU_R15 __VCPU_REGS_R15 * WORD_SIZE
> #endif
>
> - .text
> +.section .noinstr.text, "ax"
>
> /**
> * vmx_vmenter - VM-Enter the current loaded VMCS
> @@ -231,6 +231,9 @@ SYM_FUNC_START(__vmx_vcpu_run)
> jmp 1b
> SYM_FUNC_END(__vmx_vcpu_run)
>
> +
> +.section .text, "ax"
> +
> /**
> * vmread_error_trampoline - Trampoline from inline asm to vmread_error()
> * @field: VMCS field encoding that failed
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -6000,7 +6000,7 @@ static int vmx_handle_exit(struct kvm_vc
> * information but as all relevant affected CPUs have 32KiB L1D cache size
> * there is no point in doing so.
> */
> -static void vmx_l1d_flush(struct kvm_vcpu *vcpu)
> +static noinstr void vmx_l1d_flush(struct kvm_vcpu *vcpu)
> {
> int size = PAGE_SIZE << L1D_CACHE_ORDER;
>
> @@ -6033,7 +6033,7 @@ static void vmx_l1d_flush(struct kvm_vcp
> vcpu->stat.l1d_flush++;
>
> if (static_cpu_has(X86_FEATURE_FLUSH_L1D)) {
> - wrmsrl(MSR_IA32_FLUSH_CMD, L1D_FLUSH);
> + native_wrmsrl(MSR_IA32_FLUSH_CMD, L1D_FLUSH);
> return;
> }
>
> @@ -6514,7 +6514,7 @@ static void vmx_update_hv_timer(struct k
> }
> }
>
> -void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)
> +void noinstr vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)
> {
> if (unlikely(host_rsp != vmx->loaded_vmcs->host_state.rsp)) {
> vmx->loaded_vmcs->host_state.rsp = host_rsp;
> @@ -6524,6 +6524,61 @@ void vmx_update_host_rsp(struct vcpu_vmx
>
> bool __vmx_vcpu_run(struct vcpu_vmx *vmx, unsigned long *regs, bool launched);
>
> +static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
> + struct vcpu_vmx *vmx)
> +{
> + instr_begin();
> + /*
> + * VMENTER enables interrupts (host state), but the kernel state is
> + * interrupts disabled when this is invoked. Also tell RCU about
> + * it. This is the same logic as for exit_to_user_mode().
> + *
> + * 1) Trace interrupts on state
> + * 2) Prepare lockdep with RCU on
> + * 3) Invoke context tracking if enabled to adjust RCU state
> + * 4) Tell lockdep that interrupts are enabled
> + */
> + trace_hardirqs_on_prepare();
> + lockdep_hardirqs_on_prepare(CALLER_ADDR0);
> + instr_end();
> +
> + guest_enter_irqoff();
> + lockdep_hardirqs_on(CALLER_ADDR0);
> +
> + /* L1D Flush includes CPU buffer clear to mitigate MDS */
> + if (static_branch_unlikely(&vmx_l1d_should_flush))
> + vmx_l1d_flush(vcpu);
> + else if (static_branch_unlikely(&mds_user_clear))
> + mds_clear_cpu_buffers();
> +
> + if (vcpu->arch.cr2 != read_cr2())
> + write_cr2(vcpu->arch.cr2);
> +
> + vmx->fail = __vmx_vcpu_run(vmx, (unsigned long *)&vcpu->arch.regs,
> + vmx->loaded_vmcs->launched);
> +
> + vcpu->arch.cr2 = read_cr2();
> +
> + /*
> + * VMEXIT disables interrupts (host state), but tracing and lockdep
> + * have them in state 'on'. Same as enter_from_user_mode().
> + *
> + * 1) Tell lockdep that interrupts are disabled
> + * 2) Invoke context tracking if enabled to reactivate RCU
> + * 3) Trace interrupts off state
> + *
> + * This needs to be done before the below as native_read_msr()
> + * contains a tracepoint and x86_spec_ctrl_restore_host() calls
> + * into world and some more.
> + */
> + lockdep_hardirqs_off(CALLER_ADDR0);
> + guest_exit_irqoff();
> +
> + instr_begin();
> + trace_hardirqs_off_prepare();
> + instr_end();
> +}
> +
> static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
> {
> struct vcpu_vmx *vmx = to_vmx(vcpu);
> @@ -6604,49 +6659,9 @@ static void vmx_vcpu_run(struct kvm_vcpu
> x86_spec_ctrl_set_guest(vmx->spec_ctrl, 0);
>
> /*
> - * VMENTER enables interrupts (host state), but the kernel state is
> - * interrupts disabled when this is invoked. Also tell RCU about
> - * it. This is the same logic as for exit_to_user_mode().
> - *
> - * 1) Trace interrupts on state
> - * 2) Prepare lockdep with RCU on
> - * 3) Invoke context tracking if enabled to adjust RCU state
> - * 4) Tell lockdep that interrupts are enabled
> + * The actual VMENTER/EXIT is in the .noinstr.text section.
> */
> - trace_hardirqs_on_prepare();
> - lockdep_hardirqs_on_prepare(CALLER_ADDR0);
> - guest_enter_irqoff();
> - lockdep_hardirqs_on(CALLER_ADDR0);
> -
> - /* L1D Flush includes CPU buffer clear to mitigate MDS */
> - if (static_branch_unlikely(&vmx_l1d_should_flush))
> - vmx_l1d_flush(vcpu);
> - else if (static_branch_unlikely(&mds_user_clear))
> - mds_clear_cpu_buffers();
> -
> - if (vcpu->arch.cr2 != read_cr2())
> - write_cr2(vcpu->arch.cr2);
> -
> - vmx->fail = __vmx_vcpu_run(vmx, (unsigned long *)&vcpu->arch.regs,
> - vmx->loaded_vmcs->launched);
> -
> - vcpu->arch.cr2 = read_cr2();
> -
> - /*
> - * VMEXIT disables interrupts (host state), but tracing and lockdep
> - * have them in state 'on'. Same as enter_from_user_mode().
> - *
> - * 1) Tell lockdep that interrupts are disabled
> - * 2) Invoke context tracking if enabled to reactivate RCU
> - * 3) Trace interrupts off state
> - *
> - * This needs to be done before the below as native_read_msr()
> - * contains a tracepoint and x86_spec_ctrl_restore_host() calls
> - * into world and some more.
> - */
> - lockdep_hardirqs_off(CALLER_ADDR0);
> - guest_exit_irqoff();
> - trace_hardirqs_off_prepare();
> + vmx_vcpu_enter_exit(vcpu, vmx);
>
> /*
> * We do not use IBRS in the kernel. If this vCPU has used the
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -381,7 +381,7 @@ int kvm_set_apic_base(struct kvm_vcpu *v
> }
> EXPORT_SYMBOL_GPL(kvm_set_apic_base);
>
> -asmlinkage __visible void kvm_spurious_fault(void)
> +asmlinkage __visible noinstr void kvm_spurious_fault(void)
> {
> /* Fault while not rebooting. We want the trace. */
> BUG_ON(!kvm_rebooting);
>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
next prev parent reply other threads:[~2020-05-06 8:17 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-05 13:41 [patch V4 part 2 00/18] x86/entry: Entry/exception code rework, syscall and KVM changes Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 01/18] x86/entry/64: Move non entry code into .text section Thomas Gleixner
2020-05-06 15:51 ` Peter Zijlstra
2020-05-08 1:31 ` Steven Rostedt
2020-05-08 23:53 ` Andy Lutomirski
2020-05-10 13:39 ` Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 02/18] x86/entry/32: " Thomas Gleixner
2020-05-07 13:15 ` Alexandre Chartre
2020-05-07 14:14 ` Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 03/18] x86/entry: Mark enter_from_user_mode() noinstr Thomas Gleixner
2020-05-08 8:21 ` Masami Hiramatsu
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 04/18] x86/entry/common: Protect against instrumentation Thomas Gleixner
2020-05-07 13:39 ` Alexandre Chartre
2020-05-07 14:13 ` Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 05/18] x86/entry: Move irq tracing on syscall entry to C-code Thomas Gleixner
2020-05-07 13:55 ` Alexandre Chartre
2020-05-07 14:10 ` Thomas Gleixner
2020-05-07 15:03 ` Thomas Gleixner
2020-05-07 17:06 ` Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 06/18] x86/entry: Move irq flags tracing to prepare_exit_to_usermode() Thomas Gleixner
2020-05-08 23:57 ` Andy Lutomirski
2020-05-09 10:16 ` Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 07/18] context_tracking: Ensure that the critical path cannot be instrumented Thomas Gleixner
2020-05-08 8:23 ` Masami Hiramatsu
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 08/18] lib/smp_processor_id: Move it into noinstr section Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] x86/speculation/mds: Mark mds_user_clear_cpu_buffers() __always_inline tip-bot2 for Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] lib/smp_processor_id: Move it into noinstr section tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 09/18] x86/speculation/mds: Mark mds_user_clear_cpu_buffers() __always_inline Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 10/18] x86/entry/64: Check IF in __preempt_enable_notrace() thunk Thomas Gleixner
2020-05-07 14:15 ` Alexandre Chartre
2020-05-09 0:10 ` Andy Lutomirski
2020-05-09 10:25 ` Thomas Gleixner
2020-05-10 18:47 ` Thomas Gleixner
2020-05-11 18:27 ` Thomas Gleixner
2020-05-12 1:48 ` Steven Rostedt
2020-05-12 1:51 ` Steven Rostedt
2020-05-12 8:14 ` Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 11/18] x86/entry/64: Mark ___preempt_schedule_notrace() thunk noinstr Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 12/18] x86,objtool: Make entry_64_compat.S objtool clean Thomas Gleixner
2020-05-09 0:11 ` Andy Lutomirski
2020-05-09 10:06 ` Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] x86/entry: " tip-bot2 for Peter Zijlstra
2020-05-05 13:41 ` [patch V4 part 2 13/18] x86/kvm: Move context tracking where it belongs Thomas Gleixner
2020-05-06 7:42 ` Paolo Bonzini
2020-05-09 0:14 ` Andy Lutomirski
2020-05-09 10:12 ` Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 14/18] x86/kvm/vmx: Add hardirq tracing to guest enter/exit Thomas Gleixner
2020-05-06 7:55 ` Paolo Bonzini
2020-05-05 13:41 ` [patch V4 part 2 15/18] x86/kvm/svm: Handle hardirqs proper on " Thomas Gleixner
2020-05-06 8:15 ` Paolo Bonzini
2020-05-06 8:48 ` Thomas Gleixner
2020-05-06 9:21 ` Paolo Bonzini
2020-05-07 14:44 ` [patch V5 " Thomas Gleixner
2020-05-08 13:45 ` Paolo Bonzini
2020-05-08 14:01 ` Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 16/18] context_tracking: Make guest_enter/exit() .noinstr ready Thomas Gleixner
2020-05-19 19:58 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-05 13:41 ` [patch V4 part 2 17/18] x86/kvm/vmx: Move guest enter/exit into .noinstr.text Thomas Gleixner
2020-05-06 8:17 ` Paolo Bonzini [this message]
2020-05-05 13:41 ` [patch V4 part 2 18/18] x86/kvm/svm: " Thomas Gleixner
2020-05-06 8:17 ` Paolo Bonzini
2020-05-07 14:47 ` Alexandre Chartre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=414b554c-ba2c-c5b2-00bd-6c5222e54a82@redhat.com \
--to=pbonzini@redhat.com \
--cc=alexandre.chartre@oracle.com \
--cc=boris.ostrovsky@oracle.com \
--cc=brgerst@gmail.com \
--cc=frederic@kernel.org \
--cc=jgross@suse.com \
--cc=joel@joelfernandes.org \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=paulmck@kernel.org \
--cc=pmladek@suse.com \
--cc=rostedt@goodmis.org \
--cc=sean.j.christopherson@intel.com \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®