Vincent Hanquez wrote:

>On Mon, Oct 11, 2004 at 04:51:04PM +0200, Vitez Gabor wrote:
>  
>
>>Hi,
>>
>>my forcedeth driver said:
>>
>>eth1: received irq with unknown events 0x1. Please report
>>    
>>
>
>Hi,
>
>In latest 2.6, the 0x1 event is handle as IRQ_RX_ERROR.
>the 2.4 driver is not synced with 2.6 and apparently a bit old.
>you may consider a backport of the 2.6 driver to the 2.4 to fix the problem.
>
>  
>
Correct. Actually I have a backport, but it's on hold due to lack of 
testing: I have tested it with an nForce 3 Gb board, but I don't have an 
old nForce 2 board.

Vincent, could you try the attached patch? The critical change is the 
media detection: Test that the nic handles booting without a network 
cable and then attaching the network cable when the interface is already 
up correctly.

--
    Manfred