Ankit Jain wrote: > Sorry but iu could not get why are you adding and > subtracting this 60 in priorities. that corelation i > had also got but could not understrand whats this 60? > and also what is this dynamic priority? hows different > from normal priority Dynamic priority is the current priority the scheduler has allocated to a task. It uses it to decide which task to go next; the lower the number the better it's priority so it goes first. The subtracting 100 and 60 is just what the userspace tools do to represent an obviously complicated value. Please don't top post. It makes it hard to respond appropriately and follow email threads. Cheers, Con > > thanks > > ankit > --- Con Kolivas wrote: > >>Con Kolivas wrote: >> >>>Ankit Jain wrote: >>> >>> >>>>hi >>>> >>>>if somebody knows the difference b/w /PRI of both >>>>these commands because both give different >> >>results >> >>>>ps -Al >>>>& top >>>> >>>>as per priority rule we can set priority upto >> >>0-99 >> >>>>but top never shows this high priority >>> >>> >>>Priority values 0-99 are real time ones and >> >>100-139 are normal >> >>>scheduling ones. RT scheduling does not change >> >>dynamic priority while >> >>>running wheras normal scheduling does (between >> >>100-139). top shows the >> >>>value of the current dynamic priority in the PRI >> >>column as the current >> >>>dynamic priority-100. If you have a real time task >> >>in top it shows as a >> >>>-ve value. ps -Al seems to show the current >> >>dynamic priority+60. >> >>That should read dynamic priority-60 in the PRI >>column.