ksymoops 2.4.9 on i686 2.6.9-rc3-mm2.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.6.9-rc3-mm2/ (default)
     -m /boot/System.map-2.6.9-rc3-mm2 (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Machine check exception polling timer started.
Unable to handle kernel paging request at virtual address 6b6b6b6b
c0186959
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c0186959>]    Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246   (2.6.9-rc3-mm2) 
eax: 00000000   ebx: 6b6b6b6b   ecx: ffffffff   edx: cffa0770
esi: c037ab40   edi: 6b6b6b6b   ebp: cc0a7ea0   esp: cc0a7e7c
ds: 007b   es: 007b   ss: 0068
Stack: c1301938 cc0a7e90 c022b9ed c034fa14 cffa0770 6b6b6b6b cf58c7d8 c037ab40 
       c13e593c cc0a7ec8 c013813e 00000286 00000003 cc0a6000 00000212 00000005 
       c13e593c c13018f4 c1301938 cc0a7eec d083d3ff d084286a d0821af4 c1301990 
Call Trace:
 [<c0105dd6>] show_stack+0xa6/0xb0
 [<c0105f4d>] show_registers+0x14d/0x1c0
 [<c0106134>] die+0xe4/0x170
 [<c0115822>] do_page_fault+0x4c2/0x5f7
 [<c01059a9>] error_code+0x2d/0x38
 [<c013813e>] free_irq+0x8e/0xf0
 [<d083d3ff>] usb_hcd_pci_remove+0xaf/0x180 [usbcore]
 [<c01c27b6>] pci_device_remove+0x66/0x70
 [<c022cbf7>] device_release_driver+0x57/0x60
 [<c022cc19>] driver_detach+0x19/0x30
 [<c022d0bc>] bus_remove_driver+0x5c/0xa0
 [<c022d5a7>] driver_unregister+0x17/0x40
 [<c01c29ae>] pci_unregister_driver+0xe/0x20
 [<d08219e0>] uhci_hcd_cleanup+0x10/0x56 [uhci_hcd]
 [<c0132b17>] sys_delete_module+0x177/0x1a0
 [<c0104f4d>] sysenter_past_esp+0x52/0x71
Code: 00 00 55 89 e5 83 ec 24 85 d2 89 5d f4 89 75 f8 89 7d fc 89 55 ec 89 45 f0 0f 84 96 00 00 00 8b 5d f0 31 c0 b9 ff ff ff ff 89 df <f2> ae f7 d1 49 8b 42 34 8d 7a 34 89 ce 85 c0 74 6e 8b 0f 89 da 


>>EIP; c0186959 <remove_proc_entry+29/140>   <=====

>>ecx; ffffffff <__kernel_rt_sigreturn+1bbf/????>
>>edx; cffa0770 <pg0+fbcf770/3fc2d400>
>>esi; c037ab40 <tasklist_lock+140/3800>
>>ebp; cc0a7ea0 <pg0+bcd6ea0/3fc2d400>
>>esp; cc0a7e7c <pg0+bcd6e7c/3fc2d400>

Trace; c0105dd6 <show_stack+a6/b0>
Trace; c0105f4d <show_registers+14d/1c0>
Trace; c0106134 <die+e4/170>
Trace; c0115822 <do_page_fault+4c2/5f7>
Trace; c01059a9 <error_code+2d/38>
Trace; c013813e <free_irq+8e/f0>
Trace; d083d3ff <pg0+1046c3ff/3fc2d400>
Trace; c01c27b6 <pci_device_remove+66/70>
Trace; c022cbf7 <device_release_driver+57/60>
Trace; c022cc19 <driver_detach+19/30>
Trace; c022d0bc <bus_remove_driver+5c/a0>
Trace; c022d5a7 <driver_unregister+17/40>
Trace; c01c29ae <pci_unregister_driver+e/20>
Trace; d08219e0 <pg0+104509e0/3fc2d400>
Trace; c0132b17 <sys_delete_module+177/1a0>
Trace; c0104f4d <sysenter_past_esp+52/71>

This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.

Code;  c018692e <free_proc_entry+4e/50>
00000000 <_EIP>:
Code;  c018692e <free_proc_entry+4e/50>
   0:   00 00                     add    %al,(%eax)
Code;  c0186930 <remove_proc_entry+0/140>
   2:   55                        push   %ebp
Code;  c0186931 <remove_proc_entry+1/140>
   3:   89 e5                     mov    %esp,%ebp
Code;  c0186933 <remove_proc_entry+3/140>
   5:   83 ec 24                  sub    $0x24,%esp
Code;  c0186936 <remove_proc_entry+6/140>
   8:   85 d2                     test   %edx,%edx
Code;  c0186938 <remove_proc_entry+8/140>
   a:   89 5d f4                  mov    %ebx,0xfffffff4(%ebp)
Code;  c018693b <remove_proc_entry+b/140>
   d:   89 75 f8                  mov    %esi,0xfffffff8(%ebp)
Code;  c018693e <remove_proc_entry+e/140>
  10:   89 7d fc                  mov    %edi,0xfffffffc(%ebp)
Code;  c0186941 <remove_proc_entry+11/140>
  13:   89 55 ec                  mov    %edx,0xffffffec(%ebp)
Code;  c0186944 <remove_proc_entry+14/140>
  16:   89 45 f0                  mov    %eax,0xfffffff0(%ebp)
Code;  c0186947 <remove_proc_entry+17/140>
  19:   0f 84 96 00 00 00         je     b5 <_EIP+0xb5>
Code;  c018694d <remove_proc_entry+1d/140>
  1f:   8b 5d f0                  mov    0xfffffff0(%ebp),%ebx
Code;  c0186950 <remove_proc_entry+20/140>
  22:   31 c0                     xor    %eax,%eax
Code;  c0186952 <remove_proc_entry+22/140>
  24:   b9 ff ff ff ff            mov    $0xffffffff,%ecx
Code;  c0186957 <remove_proc_entry+27/140>
  29:   89 df                     mov    %ebx,%edi

This decode from eip onwards should be reliable

Code;  c0186959 <remove_proc_entry+29/140>
00000000 <_EIP>:
Code;  c0186959 <remove_proc_entry+29/140>   <=====
   0:   f2 ae                     repnz scas %es:(%edi),%al   <=====
Code;  c018695b <remove_proc_entry+2b/140>
   2:   f7 d1                     not    %ecx
Code;  c018695d <remove_proc_entry+2d/140>
   4:   49                        dec    %ecx
Code;  c018695e <remove_proc_entry+2e/140>
   5:   8b 42 34                  mov    0x34(%edx),%eax
Code;  c0186961 <remove_proc_entry+31/140>
   8:   8d 7a 34                  lea    0x34(%edx),%edi
Code;  c0186964 <remove_proc_entry+34/140>
   b:   89 ce                     mov    %ecx,%esi
Code;  c0186966 <remove_proc_entry+36/140>
   d:   85 c0                     test   %eax,%eax
Code;  c0186968 <remove_proc_entry+38/140>
   f:   74 6e                     je     7f <_EIP+0x7f>
Code;  c018696a <remove_proc_entry+3a/140>
  11:   8b 0f                     mov    (%edi),%ecx
Code;  c018696c <remove_proc_entry+3c/140>
  13:   89 da                     mov    %ebx,%edx


1 warning and 1 error issued.  Results may not be reliable.