From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org
Cc: andy.shevchenko@gmail.com, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v2 4/8] gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
Date: Thu, 15 Mar 2018 11:52:44 -0400 [thread overview]
Message-ID: <41c682a781e20b2db55491d36d600d56bb6b5c66.1521128287.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1521128287.git.vilhelm.gray@gmail.com>
The ACCES I/O PCIe-IDIO-24 series of devices provides 24
optically-isolated digital I/O accessed via six 8-bit ports. Since eight
input lines are acquired on a single port input read -- and similarly
eight output lines are set on a single port output write -- the
PCIe-IDIO-24 GPIO driver may improve multiple I/O reads/writes by
utilizing a get_multiple/set_multiple callbacks. This patch implements
the idio_24_gpio_get_multiple function which serves as the respective
get_multiple callback, and implements the idio_24_gpio_set_multiple
function which serves as the respective set_multiple callback.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-pcie-idio-24.c | 118 +++++++++++++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index f666e2e69074..8d2f4745a13c 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -15,6 +15,7 @@
* This driver supports the following ACCES devices: PCIe-IDIO-24,
* PCIe-IDI-24, PCIe-IDO-24, and PCIe-IDIO-12.
*/
+#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/errno.h>
@@ -193,6 +194,61 @@ static int idio_24_gpio_get(struct gpio_chip *chip, unsigned int offset)
return !!(ioread8(&idio24gpio->reg->ttl_in0_7) & offset_mask);
}
+static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+ size_t i;
+ const unsigned int gpio_reg_size = 8;
+ unsigned int bits_offset;
+ size_t word_index;
+ unsigned int word_offset;
+ unsigned long mask_word;
+ const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+ unsigned long port_state;
+ const u8 __iomem ports[] = {
+ idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
+ idio24gpio->reg->out16_23, idio24gpio->reg->in0_7,
+ idio24gpio->reg->in8_15, idio24gpio->reg->in16_23
+ };
+ const unsigned long out_mode_mask = BIT(1);
+
+ /* clear bits array to a clean slate */
+ bitmap_zero(bits, chip->ngpio);
+
+ /* get bits are evaluated a gpio port register at a time */
+ for (i = 0; i < ARRAY_SIZE(ports); i++) {
+ /* gpio offset in bits array */
+ bits_offset = i * gpio_reg_size;
+
+ /* word index for bits array */
+ word_index = BIT_WORD(bits_offset);
+
+ /* gpio offset within current word of bits array */
+ word_offset = bits_offset % BITS_PER_LONG;
+
+ /* mask of get bits for current gpio within current word */
+ word_mask = mask[word_index] & (port_mask << word_offset);
+ if (!word_mask) {
+ /* no get bits in this port so skip to next one */
+ continue;
+ }
+
+ /* read bits from current gpio port (port 6 is TTL GPIO) */
+ if (i < 6)
+ port_state = ioread8(ports + i);
+ else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+ port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+ else
+ port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
+
+ /* store acquired bits at respective bits array offset */
+ bits[word_index] |= port_state << word_offset;
+ }
+
+ return 0;
+}
+
static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
@@ -234,6 +290,66 @@ static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
}
+static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+ size_t i;
+ unsigned long bits_offset;
+ unsigned long gpio_mask;
+ const unsigned int gpio_reg_size = 8;
+ const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+ unsigned long gpio_mask;
+ unsigned long flags;
+ unsigned int out_state;
+ const u8 __iomem ports[] = {
+ idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
+ idio24gpio->reg->out16_23
+ };
+ const unsigned long out_mode_mask = BIT(1);
+ const unsigned int ttl_offset = 48;
+ const size_t ttl_i = BIT_WORD(ttl_offset);
+ const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
+ const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
+ const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
+
+ /* set bits are processed a gpio port register at a time */
+ for (i = 0; i < ARRAY_SIZE(ports); i++) {
+ /* gpio offset in bits array */
+ bits_offset = i * gpio_reg_size;
+
+ /* check if any set bits for current port */
+ gpio_mask = (*mask >> bits_offset) & port_mask;
+ if (!gpio_mask) {
+ /* no set bits for this port so move on to next port */
+ continue;
+ }
+
+ raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+ /* process output lines */
+ out_state = ioread8(ports + i) & ~gpio_mask;
+ out_state |= (*bits >> bits_offset) & gpio_mask;
+ iowrite8(out_state, ports + i);
+
+ raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+ }
+
+ /* check if setting TTL lines and if they are in output mode */
+ if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
+ return;
+
+ /* handle TTL output */
+ raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+ /* process output lines */
+ out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
+ out_state |= ttl_bits;
+ iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+
+ raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
static void idio_24_irq_ack(struct irq_data *data)
{
}
@@ -397,7 +513,9 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
idio24gpio->chip.direction_input = idio_24_gpio_direction_input;
idio24gpio->chip.direction_output = idio_24_gpio_direction_output;
idio24gpio->chip.get = idio_24_gpio_get;
+ idio24gpio->chip.get_multiple = idio_24_gpio_get_multiple;
idio24gpio->chip.set = idio_24_gpio_set;
+ idio24gpio->chip.set = idio_24_gpio_set_multiple;
raw_spin_lock_init(&idio24gpio->lock);
--
2.16.2
next prev parent reply other threads:[~2018-03-15 15:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 15:46 [PATCH v2 0/8] Implement get_multiple for ACCES and PC/104 drivers William Breathitt Gray
2018-03-15 15:46 ` [PATCH v2 1/8] iio: stx104: Implement get_multiple callback William Breathitt Gray
2018-03-15 15:46 ` [PATCH v2 2/8] gpio: 104-idio-16: " William Breathitt Gray
2018-03-15 15:47 ` [PATCH v2 3/8] gpio: pci-idio-16: " William Breathitt Gray
2018-03-17 19:16 ` kbuild test robot
2018-03-15 15:52 ` William Breathitt Gray [this message]
2018-03-17 21:01 ` [PATCH v2 4/8] gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks kbuild test robot
2018-03-15 15:53 ` [PATCH v2 5/8] gpio: 104-dio-48e: Implement get_multiple callback William Breathitt Gray
2018-03-17 15:47 ` kbuild test robot
2018-03-15 15:53 ` [PATCH v2 6/8] gpio: 104-idi-48: " William Breathitt Gray
2018-03-17 15:13 ` kbuild test robot
2018-03-15 15:53 ` [PATCH v2 7/8] gpio: gpio-mm: " William Breathitt Gray
2018-03-15 15:53 ` [PATCH v2 8/8] gpio: ws16c48: " William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41c682a781e20b2db55491d36d600d56bb6b5c66.1521128287.git.vilhelm.gray@gmail.com \
--to=vilhelm.gray@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®