Re: [PATCH v13 04/10] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 02/08/2023 14:37, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> 
> Add the bindings for the CPR3 driver to the documentation.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> [Konrad: Make binding check pass; update AGdR's email]
> Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml    | 291 +++++++++++++++++++++
>  1 file changed, 291 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
> new file mode 100644
> index 000000000000..d797abc5d5fe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
> @@ -0,0 +1,291 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#"

Drop quotes.

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh)
> +
> +description:
> +  CPR (Core Power Reduction) is a technology to reduce core power of a CPU
> +  (or another device). Each OPP of a device corresponds to a "corner" that
> +  has a range of valid voltages for a particular frequency.
> +  The CPR monitors dynamic factors such as temperature, etc. and suggests
> +  or (in the CPR-hardened case) applies voltage adjustments to save power
> +  and meet silicon characteristic requirements for a given chip unit.
> +
> +maintainers:
> +  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description: CPRv3 controller

Nit, since you are going to resend, then: Drop description, it's the
same as compatible.

> +        items:
> +          - const: qcom,cpr3
> +      - description: CPRv4 controller

Ditto


Best regards,
Krzysztof