Re: [PATCH v3 2/3] drm: bridge: Add thc63lvd1024 LVDS decoder driver

[Andrzej Hajda <a.hajda@samsung.com>]

On 14.03.2018 11:09, jacopo mondi wrote:
> Hi Andrzej,
>     thanks for review
>
> On Wed, Mar 14, 2018 at 09:42:36AM +0100, Andrzej Hajda wrote:
>> On 13.03.2018 15:30, Jacopo Mondi wrote:
>>> Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
>>> output decoder.
>> IMO converter suits here better, but it is just suggestion.
>>
>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>>> ---
>>>  drivers/gpu/drm/bridge/Kconfig        |   7 +
>>>  drivers/gpu/drm/bridge/Makefile       |   1 +
>>>  drivers/gpu/drm/bridge/thc63lvd1024.c | 241 ++++++++++++++++++++++++++++++++++
>>>  3 files changed, 249 insertions(+)
>>>  create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c
>>>
>>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
>>> index 3b99d5a..facf6bd 100644
>>> --- a/drivers/gpu/drm/bridge/Kconfig
>>> +++ b/drivers/gpu/drm/bridge/Kconfig
>>> @@ -92,6 +92,13 @@ config DRM_SII9234
>>>  	  It is an I2C driver, that detects connection of MHL bridge
>>>  	  and starts encapsulation of HDMI signal.
>>>
>>> +config DRM_THINE_THC63LVD1024
>>> +	tristate "Thine THC63LVD1024 LVDS decoder bridge"
>>> +	depends on OF
>>> +	select DRM_PANEL_BRIDGE
>> You don't use PANEL_BRIDGE, it should be possible to drop the select.
>>
> Ack
>
>>> +	---help---
>>> +	  Thine THC63LVD1024 LVDS decoder bridge driver.
>> Decoder to what?
>> Maybe it would be better to say it is LVDS/parallel or LVDS/RGB
>> converter or bridge.
> "LVDS to digital CMOS/TTL parallel data converter" as the manual
> describes the chip?

Should work, unless we want some consistency in interface names, we have
already: parallel / DPI / RGB. I am little bit confused about relations
between them so I do not want to enforce any.


>
>>> +
>>>  config DRM_TOSHIBA_TC358767
>>>  	tristate "Toshiba TC358767 eDP bridge"
>>>  	depends on OF
>>> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
>>> index 373eb28..fd90b16 100644
>>> --- a/drivers/gpu/drm/bridge/Makefile
>>> +++ b/drivers/gpu/drm/bridge/Makefile
>>> @@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
>>>  obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
>>>  obj-$(CONFIG_DRM_SII902X) += sii902x.o
>>>  obj-$(CONFIG_DRM_SII9234) += sii9234.o
>>> +obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
>>>  obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
>>>  obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
>>>  obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
>>> diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
>>> new file mode 100644
>>> index 0000000..4b059c0
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
>>> @@ -0,0 +1,241 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * THC63LVD1024 LVDS to parallel data DRM bridge driver.
>>> + *
>>> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
>>> + */
>>> +
>>> +#include <drm/drmP.h>
>>> +#include <drm/drm_bridge.h>
>>> +#include <drm/drm_panel.h>
>>> +
>>> +#include <linux/gpio/consumer.h>
>>> +#include <linux/of_graph.h>
>>> +#include <linux/regulator/consumer.h>
>>> +
>>> +static const char * const thc63_reg_names[] = {
>>> +	"vcc", "lvcc", "pvcc", "cvcc", };
>>> +
>>> +struct thc63_dev {
>>> +	struct device *dev;
>>> +
>>> +	struct regulator *vccs[ARRAY_SIZE(thc63_reg_names)];
>>> +
>>> +	struct gpio_desc *pwdn;
>>> +	struct gpio_desc *oe;
>>> +
>>> +	struct drm_bridge bridge;
>>> +	struct drm_bridge *next;
>>> +};
>>> +
>>> +static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
>>> +{
>>> +	return container_of(bridge, struct thc63_dev, bridge);
>>> +}
>>> +
>>> +static int thc63_attach(struct drm_bridge *bridge)
>>> +{
>>> +	struct thc63_dev *thc63 = to_thc63(bridge);
>>> +
>>> +	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
>>> +}
>>> +
>>> +static void thc63_enable(struct drm_bridge *bridge)
>>> +{
>>> +	struct thc63_dev *thc63 = to_thc63(bridge);
>>> +	struct regulator *vcc;
>>> +	unsigned int i;
>>> +	int ret;
>>> +
>>> +	for (i = 0; i < ARRAY_SIZE(thc63->vccs); i++) {
>>> +		vcc = thc63->vccs[i];
>>> +		if (vcc) {
>>> +			ret = regulator_enable(vcc);
>>> +			if (ret)
>>> +				goto error_vcc_enable;
>>> +		}
>>> +	}
>>> +
>>> +	if (thc63->pwdn)
>>> +		gpiod_set_value(thc63->pwdn, 0);
>>> +
>>> +	if (thc63->oe)
>>> +		gpiod_set_value(thc63->oe, 1);
>>> +
>>> +	return;
>>> +
>>> +error_vcc_enable:
>>> +	dev_err(thc63->dev, "Failed to enable regulator %u\n", i);
>>> +}
>>> +
>>> +static void thc63_disable(struct drm_bridge *bridge)
>>> +{
>>> +	struct thc63_dev *thc63 = to_thc63(bridge);
>>> +	struct regulator *vcc;
>>> +	unsigned int i;
>>> +	int ret;
>>> +
>>> +	for (i = 0; i < ARRAY_SIZE(thc63->vccs); i++) {
>>> +		vcc = thc63->vccs[i];
>>> +		if (vcc) {
>>> +			ret = regulator_disable(vcc);
>>> +			if (ret)
>>> +				goto error_vcc_disable;
>> I think in disable path you can report an error and continue - should be
>> safer.
>>
> Ack
>
>>> +		}
>>> +	}
>>> +
>>> +	if (thc63->pwdn)
>>> +		gpiod_set_value(thc63->pwdn, 1);
>>> +
>>> +	if (thc63->oe)
>>> +		gpiod_set_value(thc63->oe, 0);
>> Usually disable uses reverse order. Ie first disable oe, then, pwdn,
>> then regulators, also in reverse order.
>> Looks more reasonable.
>>
> Indeed! I will invert the order.
>
> (I wonder if the regulator disabling order actually makes a difference
> though).
>>> +
>>> +	return;
>>> +
>>> +error_vcc_disable:
>>> +	dev_err(thc63->dev, "Failed to disable regulator %u\n", i);
>>> +}
>>> +
>>> +struct drm_bridge_funcs thc63_bridge_func = {
>>> +	.attach	= thc63_attach,
>>> +	.enable = thc63_enable,
>>> +	.disable = thc63_disable,
>>> +};
>>> +
>>> +static int thc63_parse_dt(struct thc63_dev *thc63)
>>> +{
>>> +	struct device_node *thc63_out;
>>> +	struct device_node *remote;
>>> +	int ret = 0;
>>> +
>>> +	thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node, 2, -1);
>> Please define and use enums for port number, it will be more clear.
>>
> yup
>
>>> +	if (!thc63_out) {
>>> +		dev_err(thc63->dev, "Missing endpoint in Port@2\n");
>>> +		return -ENODEV;
>>> +	}
>>> +
>>> +	remote = of_graph_get_remote_port_parent(thc63_out);
>>> +	if (!remote) {
>>> +		dev_err(thc63->dev, "Endpoint in Port@2 unconnected\n");
>>> +		ret = -ENODEV;
>>> +		goto error_put_out_node;
>>> +	}
>>> +
>>> +	if (!of_device_is_available(remote)) {
>>> +		dev_err(thc63->dev, "Port@2 remote endpoint is disabled\n");
>>> +		ret = -ENODEV;
>>> +		goto error_put_remote_node;
>>> +	}
>>> +
>>> +	thc63->next = of_drm_find_bridge(remote);
>>> +	if (!thc63->next)
>>> +		ret = -EPROBE_DEFER;
>>> +
>>> +error_put_remote_node:
>>> +	of_node_put(remote);
>>> +error_put_out_node:
>>> +	of_node_put(thc63_out);
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int thc63_gpio_init(struct thc63_dev *thc63)
>>> +{
>>> +	thc63->pwdn = devm_gpiod_get_optional(thc63->dev, "pwdn",
>>> +					      GPIOD_OUT_LOW);
>> Shouldn't be GPIOD_OUT_HIGH - bridge initially disabled?
> No, the PWDN gpio is active low, it puts the chip in power down mode
> when the physical line level is set to 0.
>
> That's another confusing thing, when requesting the GPIO, the actual
> physical line value has to be provided, while when "set_value()" the
> logical one is requested, iirc.

I think it is opposite, only *raw* functions uses physical level. Other
uses logical level.

>
> Being the GPIO defined as active low, in power enable we set it to
> "logical inactive" == "physical 1", while during power disable it has
> to be set to "logical active" == "physical 0"
>
> Not the right place to complain here, but imo that's not consistent.
> Or have I misinterpreted the APIs? I cannot do much test, as in my setup
> the PWDN pin is hardwired to +vcc (through a physical switch, not
> controlled through a GPIO though).

devm_gpiod_get_optional calls (indirectly) gpiod_configure_flags, which
calls gpiod_direction_output which uses logical levels.

Regards
Andrzej

>
> Thanks
>    j
>
>> Regards
>> Andrzej
>>> +	if (IS_ERR(thc63->pwdn)) {
>>> +		dev_err(thc63->dev, "Unable to get GPIO \"pwdn\"\n");
>>> +		return PTR_ERR(thc63->pwdn);
>>> +	}
>>> +
>>> +	thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW);
>>> +	if (IS_ERR(thc63->oe)) {
>>> +		dev_err(thc63->dev, "Unable to get GPIO \"oe\"\n");
>>> +		return PTR_ERR(thc63->oe);
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int thc63_regulator_init(struct thc63_dev *thc63)
>>> +{
>>> +	struct regulator **reg;
>>> +	int i;
>>> +
>>> +	reg = &thc63->vccs[0];
>>> +	for (i = 0; i < ARRAY_SIZE(thc63->vccs); i++, reg++) {
>>> +		*reg = devm_regulator_get_optional(thc63->dev,
>>> +						   thc63_reg_names[i]);
>>> +		if (IS_ERR(*reg)) {
>>> +			if (PTR_ERR(*reg) == -EPROBE_DEFER)
>>> +				return -EPROBE_DEFER;
>>> +			*reg = NULL;
>>> +		}
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int thc63_probe(struct platform_device *pdev)
>>> +{
>>> +	struct thc63_dev *thc63;
>>> +	int ret;
>>> +
>>> +	thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
>>> +	if (!thc63)
>>> +		return -ENOMEM;
>>> +
>>> +	thc63->dev = &pdev->dev;
>>> +	platform_set_drvdata(pdev, thc63);
>>> +
>>> +	ret = thc63_regulator_init(thc63);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	ret = thc63_gpio_init(thc63);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	ret = thc63_parse_dt(thc63);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	thc63->bridge.driver_private = thc63;
>>> +	thc63->bridge.of_node = pdev->dev.of_node;
>>> +	thc63->bridge.funcs = &thc63_bridge_func;
>>> +
>>> +	drm_bridge_add(&thc63->bridge);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int thc63_remove(struct platform_device *pdev)
>>> +{
>>> +	struct thc63_dev *thc63 = platform_get_drvdata(pdev);
>>> +
>>> +	drm_bridge_remove(&thc63->bridge);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +#ifdef CONFIG_OF
>>> +static const struct of_device_id thc63_match[] = {
>>> +	{ .compatible = "thine,thc63lvd1024", },
>>> +	{ },
>>> +};
>>> +MODULE_DEVICE_TABLE(of, thc63_match);
>>> +#endif
>>> +
>>> +static struct platform_driver thc63_driver = {
>>> +	.probe	= thc63_probe,
>>> +	.remove	= thc63_remove,
>>> +	.driver	= {
>>> +		.name		= "thc63lvd1024",
>>> +		.of_match_table	= thc63_match,
>>> +	},
>>> +};
>>> +module_platform_driver(thc63_driver);
>>> +
>>> +MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
>>> +MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
>>> +MODULE_LICENSE("GPL v2");
>>