(Same basic problem I just reported in a seperate thread against 2.4.29-bk8)

The following has been reported in the wild for kernel 2.6.8-24:

PCI: Enabling device 0000:00:05.0 (0000 -> 0002)
PCI: No IRQ known for interrupt pin @ of device 0000:00:05.0. Probably 
buggy MP table.

It should read "No IRQ known for interrupt pin A", but the 'pin' 
variable has already been decremented (from 1 to 0), so the line:

printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device 
%s.%s\n", 'A' + pin - 1, dev->slot_name, msg);

causes "pin @" to be output, because 'A' + 0 - 1 == '@'.

The supplied patch should fix it.  It also removes a redundant check for 
a nonzero pin.


Mark F. Haigh
Mark.Haigh@spirentcom.com