Andrew Morton a écrit :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

Hi Andrew,

I can't get PCMCIA to work anymore since rc4-mm1.
It was working great with rc4 and rc3-mm1.

PCMCIA loads without any apparent problem (see attached dmesg).
But when I plug my orinoco card, nothing happens.
The hermes/orinoco modules are not even loaded as before.
cardctl insert/eject hangs.

Attached are dmesg and lsmod from rc4 and rc4-mm1, lspci and .config.

I'd like to help by reverting some patches.
But there seems to have tons of pcmcia modifications
since rc3-mm1.
Which one(s) do you think might be responsible for this ?

Regards,
Brice

> -pcmcia-add-support-ti-pci4510-cardbus-bridge.patch

> +pcmcia-bridge-resource-management-fix.patch

> +pcmcia-yenta_socket-ti4150-support.patch
> +pcmcia-pd6729-convert-to-pci_register_driver.patch
> +pcmcia-rsrc_nonstatic-sysfs-output.patch
> +pcmcia-rsrc_nonstatic-sysfs-input.patch
> +pcmcia-mark-resource-setup-as-done.patch
> +pcmcia-pcmcia_device_probe.patch
> +pcmcia-pcmcia_device_remove.patch
> +pcmcia-pcmcia_device_add.patch
> +pcmcia-use-bus_rescan_devices.patch
> +pcmcia-add-pcmcia-devices-autonomously.patch
> +pcmcia-determine-some-useful-information-about-devices.patch
> +pcmcia-per-device-sysfs-output.patch