Re: [PATCH] net: dsa: lan9303: allow vid != 0 in port_fdb_{add|del} methods

["Sverdlin, Alexander" <alexander.sverdlin@siemens.com>]

Hi Vladimir,

thank you for quick review!

On Wed, 2023-05-31 at 18:16 +0300, Vladimir Oltean wrote:
> > LAN9303 doesn't associate FDB (ALR) entries with VLANs, it has just
> > one
> > global Address Logic Resolution table [1].
> > 
> > Ignore VID in port_fdb_{add|del} methods, go on with the global
> > table. This
> > is the same semantics as hellcreek or RZ/N1 implement.
> > 
> > Visible symptoms:
> > LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to delete
> > 00:xx:xx:xx:xx:cf vid 1 from fdb: -2
> > LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to add
> > 00:xx:xx:xx:xx:cf vid 1 to fdb: -95
> > 
> > [1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002308A.pdf
> > 
> > Fixes: 0620427ea0d6 ("net: dsa: lan9303: Add fdb/mdb manipulation")
> > Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
> > ---
> 
> Thanks for taking a look. Although it would probably be safer to add:
> 
> Fixes: 2fd186501b1c ("net: dsa: be louder when a non-legacy FDB
> operation fails")
> 
> since I'm not sure it has a reason to be backported beyond that.

Well, it's not only about visible errors, but the driver also refused
to install the FDB entries, so it's change in behaviour, not only
cosmetics.

> Anyway:
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

-- 
Alexander Sverdlin
Siemens AG
www.siemens.com