From: Bill Davidsen <davidsen@tmr.com>
To: James Dingwall <james.dingwall@cramer.com>
Cc: "'linux-kernel@vger.kernel.org'" <linux-kernel@vger.kernel.org>,
Andries.Brouwer@cwi.nl, "'Chris Wright'" <chrisw@osdl.org>
Subject: Re: Bug: 2.6.11.8 msdos.c
Date: Fri, 06 May 2005 09:59:10 -0400 [thread overview]
Message-ID: <427B782E.6040309@tmr.com> (raw)
In-Reply-To: <3E116F19B784CD47A7CE7F923A436499014C8E39@s2.cramer.co.uk>
James Dingwall wrote:
>>* James Dingwall (james.dingwall@cramer.com) wrote:
>>
>>>Using vanilla 2.6.11.8 I get a "Cannot open initial
>>
>>console" on boot,
>>
>>>2.6.11.7 was fine. I have removed the patches to
>>
>>fs/partitions/msdos.c and
>>
>>>this has fixed my problem. I've read the discussion on
>>
>>this patch but it
>>
>>>doesn't indicate that this problem may occur so there is no
>>
>>suggested
>>
>>>solution. I have attached my .config and my partition
>>
>>layout is below, I
>>
>>>can provide any other information that might be useful.
>>
>>I'm not on the list
>>
>>>so plase Cc, I will follow the thread in the archives too.
>>
>>Thanks for the report James. To be clear, you simply backed out the
>>following: (I ask partly because this got merged in as part of the i2c
>>sysfs ChangeSet, odd)
>>
>>===== fs/partitions/msdos.c 1.26 vs 1.27 =====
>>--- 1.26/fs/partitions/msdos.c 2004-11-09 12:43:17 -08:00
>>+++ 1.27/fs/partitions/msdos.c 2005-03-07 20:41:42 -08:00
>>@@ -114,6 +114,9 @@ parse_extended(struct parsed_partitions
>> */
>> for (i=0; i<4; i++, p++) {
>> u32 offs, size, next;
>>+
>>+ if (SYS_IND(p) == 0)
>>+ continue;
>> if (!NR_SECTS(p) || is_extended_partition(p))
>> continue;
>>
>>@@ -430,6 +433,8 @@ int msdos_partition(struct parsed_partit
>> for (slot = 1 ; slot <= 4 ; slot++, p++) {
>> u32 start = START_SECT(p)*sector_size;
>> u32 size = NR_SECTS(p)*sector_size;
>>+ if (SYS_IND(p) == 0)
>>+ continue;
>> if (!size)
>> continue;
>> if (is_extended_partition(p)) {
>
>
> Yes, this is the patch that I backed out.
>
>
>>>Disk /dev/hda: 30.0 GB, 30020272128 bytes
>>>255 heads, 63 sectors/track, 3649 cylinders
>>>Units = cylinders of 16065 * 512 = 8225280 bytes
>>>
>>> Device Boot Start End Blocks Id System
>>>/dev/hda1 * 1 1797 14434371 83 Linux
>>>/dev/hda2 1798 3649 14876190 5 Extended
>>>/dev/hda5 1798 1860 506016 0 Empty
>>>/dev/hda6 1861 1892 257008+ 83 Linux
>>>/dev/hda7 1893 1924 257008+ 83 Linux
>>>/dev/hda8 1925 2049 1004031 82
>>
>>Linux swap / Solaris
>>
>>>/dev/hda9 2050 2112 506016 0 Empty
>>>/dev/hda10 2113 2611 4008186 83 Linux
>>>/dev/hda11 2612 2861 2008093+ 83 Linux
>
>
> Andries' hint about changing the partition types to !0 is a fix for the
> problem.
What is the reason for the patch in the first place? Obviously it's
intended to do something, or not do something bad, but what's wrong with
a reserved partition?
I looked at the rest of msdos.c and it wasn't blindingly clear what the
original intent was. A partition type of zero is unusual, but it's not
illegal, is it? (as in violates some standard)
--
-bill davidsen (davidsen@tmr.com)
"The secret to procrastination is to put things off until the
last possible moment - but no longer" -me
next prev parent reply other threads:[~2005-05-06 13:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-06 8:12 James Dingwall
2005-05-06 13:59 ` Bill Davidsen [this message]
2005-05-06 14:11 ` Richard B. Johnson
2005-05-09 17:39 ` Bill Davidsen
[not found] <42kyq-2oO-35@gated-at.bofh.it>
[not found] ` <41bQz-2lJ-15@gated-at.bofh.it>
[not found] ` <42kyq-2oO-33@gated-at.bofh.it>
2005-05-09 20:38 ` Bodo Eggert <harvested.in.lkml@posting.7eggert.dyndns.org>
-- strict thread matches above, loose matches on Subject: below --
2005-05-05 10:33 James Dingwall
2005-05-05 16:54 ` Chris Wright
2005-05-05 17:38 ` Andries Brouwer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=427B782E.6040309@tmr.com \
--to=davidsen@tmr.com \
--cc=Andries.Brouwer@cwi.nl \
--cc=chrisw@osdl.org \
--cc=james.dingwall@cramer.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome