Michael Tokarev wrote:
> Brian Gerst wrote:
> 
>>Michael Tokarev wrote:
> 
> []
> 
>>>>It have 4 3c509 cards, one EISA and 3 ISA.  Here's the dmesg
> 
> []
> 
>>>All the ISA cards are in EISA mode (set in 3c5x9cfg.exe utility).
>>>IRQs are assigned by the EISA bus (set by EISA configuration utility).
>>>If any of the ISA cards are in non-EISA mode, the some of them
>>>does not work at all, starting from EISA BIOS config during boot.
>>>So I can't switch the cards into PNP mode.
> 
> []
> 
>>what does dmesg|grep EISA show?
> 
> 
> Looks like I already found it by looking at the driver source.
> 
> struct eisa_device_id el3_eisa_ids[] = {
>                 { "TCM5092" },
>                 { "TCM5093" },
>                 { "TCM5095" },     <==== I added this line
>                 { "" }
> };
> 
> and now it works.
> 
> EISA: Probing bus 0 at 0000:00:06.0
> EISA: Mainboard ACR1C01 detected.
> EISA: slot 2 : TCM5095 detected.
> EISA: slot 3 : TCM5095 detected.
> EISA: slot 4 : TCM5095 detected.
> EISA: slot 5 : TCM5093 detected.
> EISA: Detected 4 cards.
> 
> 
> I'm not sure if it will work with ISA cards in ISA mode.
> As I pointed out above, this machine does not want to
> initialize EISA bus if at least one of the cards isn't
> in EISA mode.  Will "plain" (in ISA mode) 3c509 be shown
> in EISA scan too?

The trivial patch is attached.  Please consider applying.

/mjt