Re: [PATCH 2/5] dt-bindings: net: Add MTIP L2 switch description (fec,mtip-switch.yaml)

[Andrew Lunn <andrew@lunn.ch>]

On Wed, Mar 26, 2025 at 02:43:16PM +0100, Lukasz Majewski wrote:
> Hi Andrew,
> 
> > > +  phy-reset-gpios:
> > > +    deprecated: true
> > > +    description:
> > > +      Should specify the gpio for phy reset.  
> > 
> > It seem odd that a new binding has deprecated properties. Maybe add a
> > comment in the commit message as to why they are there. I assume this
> > is because you are re-using part of the FEC code as is, and it
> > implements them?
> > 
> 
> In the case of MTIP L2 switch, the reset gpio line (in my case, but
> also on e.g. imx28-evk, and vf610) is single for both PHYs.

So this is known as an MDIO bus reset, not a PHY reset.

Documentation/devicetree/bindings/net/mdio.yaml

  reset-gpios:
    maxItems: 1
    description:
      The phandle and specifier for the GPIO that controls the RESET
      lines of all devices on that MDIO bus.

We have moved the handling of such reset lines into core code, which
is why per driver properties are deprecated, and you should use the
properties defined in the core.

	Andrew