i attach the .config


------------------------


SGI XFS with no debug enabled
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
cs: IO port probe 0x2000-0x2fff: clean.
ehci_hcd 0000:00:1d.7: debug port 1
C058 C1AD C1A3 C1A4 C0AC C0B3 C0B4 C0B5 C0E7 C136
Unable to handle kernel paging request at virtual address 6b6b6d63
c0227ca7
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c0227ca7>]    Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286   (2.6.12-rc5-mm2)
eax: 6b6b6b6b   ebx: 00000000   ecx: 00000000   edx: c1578cc0
esi: dedf9158   edi: 00000000   ebp: dec55cb8   esp: dec55cb0
ds: 007b   es: 007b   ss: 0068
Stack: c0229c87 6b6b6b6b dec55cf4 c02348ce dedf9158 00000000 dedf9458 
0000000a
        dec55ce0 c02343e1 dedf9458 0000000a 000b78e0 00000000 00000000 
df0cce1c
        dec55d18 dec55d84 c0234a61 df0cce1c 00000000 dec55d3c 000b78e0 
00000000
Call Trace:
  [<c0104b8f>] show_stack+0x7f/0xa0
  [<c0104d37>] show_registers+0x157/0x1c0
  [<c0104f94>] die+0x134/0x290
  [<c011b1b9>] do_page_fault+0x399/0x6ff
  [<c0104683>] error_code+0x4f/0x54
  [<c02348ce>] process_safelink+0xae/0x1b0
  [<c0234a61>] process_safelinks+0x91/0xb0
  [<c02342d1>] _init_safelink+0x11/0x20
  [<c023438f>] reiser4_fill_super+0x3f/0x70
  [<c018affd>] get_sb_bdev+0x12d/0x170
  [<c022c90f>] reiser4_get_sb+0x2f/0x40
  [<c018b246>] do_kern_mount+0x56/0xd0
  [<c01ac164>] do_new_mount+0x74/0xb0
  [<c01ace30>] do_mount+0x140/0x190
  [<c01ad402>] sys_mount+0x92/0xd0
  [<c0103bd9>] syscall_call+0x7/0xb
Code: 00 00 00 00 55 89 e5 8b 45 08 5d 8b 80 f8 01 00 00 8b 80 18 02 
00 00 c3 8d b6 00 00 00 00 8d bf 00 00 00 00 55 89 e5 8b 45 08 5d <8b> 
80 f8 01 00 00 83 c0 2c c3 eb 0d 90 90 90 90 90 90 90 90 90


 >>EIP; c0227ca7 <get_tree+7/20>   <=====

 >>eax; 6b6b6b6b <phys_startup_32+6b5b6b6b/c0000000>
 >>edx; c1578cc0 <pg0+d9acc0/3f820400>
 >>esi; dedf9158 <pg0+1e61b158/3f820400>
 >>ebp; dec55cb8 <pg0+1e477cb8/3f820400>
 >>esp; dec55cb0 <pg0+1e477cb0/3f820400>

Trace; c0104b8f <show_stack+7f/a0>
Trace; c0104d37 <show_registers+157/1c0>
Trace; c0104f94 <die+134/290>
Trace; c011b1b9 <do_page_fault+399/6ff>
Trace; c0104683 <error_code+4f/54>
Trace; c02348ce <process_safelink+ae/1b0>
Trace; c0234a61 <process_safelinks+91/b0>
Trace; c02342d1 <_init_safelink+11/20>
Trace; c023438f <reiser4_fill_super+3f/70>
Trace; c018affd <get_sb_bdev+12d/170>
Trace; c022c90f <reiser4_get_sb+2f/40>
Trace; c018b246 <do_kern_mount+56/d0>
Trace; c01ac164 <do_new_mount+74/b0>
Trace; c01ace30 <do_mount+140/190>
Trace; c01ad402 <sys_mount+92/d0>
Trace; c0103bd9 <syscall_call+7/b>

This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.

Code;  c0227c7c <get_super_fake+1c/20>
00000000 <_EIP>:
Code;  c0227c7c <get_super_fake+1c/20>
    0:   00 00                     add    %al,(%eax)
Code;  c0227c7e <get_super_fake+1e/20>
    2:   00 00                     add    %al,(%eax)
Code;  c0227c80 <get_cc_fake+0/20>
    4:   55                        push   %ebp
Code;  c0227c81 <get_cc_fake+1/20>
    5:   89 e5                     mov    %esp,%ebp
Code;  c0227c83 <get_cc_fake+3/20>
    7:   8b 45 08                  mov    0x8(%ebp),%eax
Code;  c0227c86 <get_cc_fake+6/20>
    a:   5d                        pop    %ebp
Code;  c0227c87 <get_cc_fake+7/20>
    b:   8b 80 f8 01 00 00         mov    0x1f8(%eax),%eax
Code;  c0227c8d <get_cc_fake+d/20>
   11:   8b 80 18 02 00 00         mov    0x218(%eax),%eax
Code;  c0227c93 <get_cc_fake+13/20>
   17:   c3                        ret
Code;  c0227c94 <get_cc_fake+14/20>
   18:   8d b6 00 00 00 00         lea    0x0(%esi),%esi
Code;  c0227c9a <get_cc_fake+1a/20>
   1e:   8d bf 00 00 00 00         lea    0x0(%edi),%edi
Code;  c0227ca0 <get_tree+0/20>
   24:   55                        push   %ebp
Code;  c0227ca1 <get_tree+1/20>
   25:   89 e5                     mov    %esp,%ebp
Code;  c0227ca3 <get_tree+3/20>
   27:   8b 45 08                  mov    0x8(%ebp),%eax
Code;  c0227ca6 <get_tree+6/20>
   2a:   5d                        pop    %ebp

This decode from eip onwards should be reliable

Code;  c0227ca7 <get_tree+7/20>
00000000 <_EIP>:
Code;  c0227ca7 <get_tree+7/20>   <=====
    0:   8b 80 f8 01 00 00         mov    0x1f8(%eax),%eax   <=====
Code;  c0227cad <get_tree+d/20>
    6:   83 c0 2c                  add    $0x2c,%eax
Code;  c0227cb0 <get_tree+10/20>
    9:   c3                        ret
Code;  c0227cb1 <get_tree+11/20>
    a:   eb 0d                     jmp    19 <_EIP+0x19>
Code;  c0227cb3 <get_tree+13/20>
    c:   90                        nop
Code;  c0227cb4 <get_tree+14/20>
    d:   90                        nop
Code;  c0227cb5 <get_tree+15/20>
    e:   90                        nop
Code;  c0227cb6 <get_tree+16/20>
    f:   90                        nop
Code;  c0227cb7 <get_tree+17/20>
   10:   90                        nop
Code;  c0227cb8 <get_tree+18/20>
   11:   90                        nop
Code;  c0227cb9 <get_tree+19/20>
   12:   90                        nop
Code;  c0227cba <get_tree+1a/20>
   13:   90                        nop
Code;  c0227cbb <get_tree+1b/20>
   14:   90                        nop

ds: ds_open(socket 0)
ds: ds_open(socket 1)
ds: ds_open(socket 1)
cs: IO port probe 0x100-0x4ff: excluding 0x140-0x14f 0x200-0x20f 
0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.