From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262488AbVF2TjS (ORCPT ); Wed, 29 Jun 2005 15:39:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262537AbVF2TjS (ORCPT ); Wed, 29 Jun 2005 15:39:18 -0400 Received: from mx.ticino.com ([195.190.166.60]:50695 "EHLO mail1.ticino.com") by vger.kernel.org with ESMTP id S262488AbVF2Td2 (ORCPT ); Wed, 29 Jun 2005 15:33:28 -0400 Message-ID: <42C2F7B1.7070500@kotarkh.ch> Date: Wed, 29 Jun 2005 21:34:09 +0200 From: nuage User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.8) Gecko/20050616 X-Accept-Language: en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: PROBLEM: new hardware problems: IRQ and ACPI (Toshiba Tecra S2-128) X-Enigmail-Version: 0.91.0.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 [1.] One line summary of the problem: When I call "halt", on my "Toshiba Tecra S2-128", the laptop won't actualy shutdown power. I *guess* this is an IRQ or/and ACPI problem. [2.] Full description of the problem/report: Hello, I knew I would have some trouble to make an un-tested laptop to work with GNU/Linux, but hope I recently reached enough skills to try it. I am totaly new to this mailing list. I know about computers, but not much about the Linux kernel at all. Here is a summary of what is working and not working: 1-The GNU/Linux console with framebuffer is perfectly working. 2-The wired network is working only most of the time. But in some conditions, like staring X seem to make it unstable. 3-Xorg is not working, almost all the time. Without changing anything related to the driver or the modules, it sometimes work or don't work. I could not figure out what is related to this. 4-"acpi_power_off" is not working either. At some random times of my installs, it did happen to work. But at each time it worked, at the next boot, it would not work. I have made all the "cat" of this mail in the same boot session, just in case. I don't know enough, but I fear some things about IRQ I don't know about would behave differrently on one boot or another. I am running with the latest gentoo kernel. Currently 2.6.11-gentoo-r11 I have tried the vanilla sources, but I could not make the framebuffer to work with them. I can make other tries if this can help. [3.] Keywords: IRQ, ACPI, Xorg, acpi_power_off, DSDT [4.] Kernel version (from /proc/version): # cat /proc/version Linux version 2.6.11-gentoo-r11 (root@bird) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 Wed Jun 29 11:57:40 CEST 2005 # [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) (I saw none. Are they reported in dmesg ?) # dmesg | grep ops # [6.] A small shell script or example program which triggers the problem (if possible) Sorry, I guess this can only happen on this new hardware. But send me a patch and the name of the kernel to try this on, and I will do it asap. [7.] Environment [7.1.] Software (add the output of the ver_linux script here) # sh ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux bird 2.6.11-gentoo-r11 #1 Wed Jun 29 11:57:40 CEST 2005 i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux Gnu C 3.3.5-20050130 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12i mount 2.12i module-init-tools 3.0 e2fsprogs 1.37 reiserfsprogs 3.6.19 reiser4progs line pcmcia-cs 3.2.8 Linux C Library 2.3.4 Dynamic linker (ldd) 2.3.4 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 udev 056 Modules Loaded snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore snd_page_alloc nvidia sk98lin # [7.2.] Processor information (from /proc/cpuinfo): # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.73GHz stepping : 8 cpu MHz : 1729.749 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2 bogomips : 3399.68 # [7.3.] Module information (from /proc/modules): # cat /proc/modules snd_pcm_oss 49056 0 - Live 0xf8de7000 snd_mixer_oss 17920 1 snd_pcm_oss, Live 0xf8db8000 snd_seq_oss 32960 0 - Live 0xf8d74000 snd_seq_midi_event 6400 1 snd_seq_oss, Live 0xf88fc000 snd_seq 50960 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8dc9000 snd_seq_device 6924 2 snd_seq_oss,snd_seq, Live 0xf88f2000 snd_intel8x0 29120 0 - Live 0xf8d7e000 snd_ac97_codec 75384 1 snd_intel8x0, Live 0xf8da4000 snd_pcm 84872 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xf8d8e000 snd_timer 22084 2 snd_seq,snd_pcm, Live 0xf88f5000 snd 48036 9 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer, Live 0xf8d67000 soundcore 7648 1 snd, Live 0xf88ea000 snd_page_alloc 7684 2 snd_intel8x0,snd_pcm, Live 0xf88e7000 nvidia 3705796 0 - Live 0xf9095000 sk98lin 207000 1 - Live 0xf8c60000 # [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) # cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : libata 0376-0376 : ide1 03c0-03df : vga+ 03c0-03df : vesafb 1000-107f : motherboard 1000-1003 : PM1a_EVT_BLK 1004-1005 : PM1a_CNT_BLK 1008-100b : PM_TMR 1010-1015 : ACPI CPU throttle 1020-1020 : PM2_CNT_BLK 1028-102f : GPE0_BLK 1180-11bf : motherboard 1640-164f : motherboard 1800-181f : 0000:00:1d.0 1800-181f : uhci_hcd 1820-183f : 0000:00:1d.1 1820-183f : uhci_hcd 1840-185f : 0000:00:1d.2 1840-185f : uhci_hcd 1860-187f : 0000:00:1d.3 1860-187f : uhci_hcd 1880-18bf : 0000:00:1e.2 1880-18bf : Intel ICH 18f0-18ff : 0000:00:1f.2 18f0-18ff : libata 1c00-1cff : 0000:00:1e.2 1c00-1cff : Intel ICH 2000-207f : 0000:00:1e.3 20a0-20bf : 0000:00:1f.3 2400-24ff : 0000:00:1e.3 3000-3fff : PCI Bus #02 3000-30ff : 0000:02:00.0 3000-30ff : sk98lin fe00-fe7f : motherboard fe00-fe7f : pnp 00:00 fe80-feff : motherboard fe80-feff : pnp 00:00 ff00-ff7f : motherboard ff00-ff7f : pnp 00:00 # # cat /proc/iomem 00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cf800-000d07ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-5fedffff : System RAM 00100000-003c5ea3 : Kernel code 003c5ea4-004ccf7f : Kernel data 5fee0000-5fee9fff : ACPI Tables 5feea000-5fefffff : ACPI Non-volatile Storage 5ff00000-5fffffff : reserved 80000000-800003ff : 0000:00:1d.7 80000000-800003ff : ehci_hcd 80000400-800004ff : 0000:00:1e.2 80000400-800004ff : Intel ICH 80000800-800009ff : 0000:00:1e.2 80000800-800009ff : Intel ICH 90000000-afffffff : PCI Bus #01 90000000-90ffffff : 0000:01:00.0 a0000000-a3ffffff : 0000:01:00.0 a0000000-a3ffffff : nvidia b0000000-b3ffffff : PCI Bus #02 b0000000-b0003fff : 0000:02:00.0 b0000000-b0003fff : sk98lin b4000000-b4003fff : 0000:06:04.2 b4004000-b4005fff : 0000:06:04.3 b4006000-b4006fff : 0000:06:02.0 b4007000-b4007fff : 0000:06:04.0 b4008000-b4008fff : 0000:06:04.1 b4009000-b40097ff : 0000:06:04.2 b4009000-b40097ff : ohci1394 b4009800-b40098ff : 0000:06:04.4 b4009c00-b4009cff : 0000:06:04.4 b400a000-b400a0ff : 0000:06:04.4 c0000000-cfffffff : PCI Bus #01 c0000000-c7ffffff : 0000:01:00.0 c0000000-c3ffffff : vesafb d0000000-d3ffffff : PCI Bus #02 e0000000-f0005fff : reserved f0008000-f000bfff : reserved fed20000-fed8ffff : reserved ff000000-ffffffff : reserved # [7.5.] PCI information ('lspci -vvv' as root) bird scripts # lspci -vvv 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Toshiba America Info Systems: Unknown device ff00 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] #10 [0141] 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff00 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [50] #0d [0000] 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) Subsystem: Toshiba America Info Systems: Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 18f0 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) Subsystem: Toshiba America Info Systems: Unknown device ff00 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR+ TAbort- SERR- TAbort- SERR- Reset+ 16bInt- PostWrite- 16-bit legacy interface ports at 0001 0000:06:04.1 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller Subsystem: Toshiba America Info Systems: Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt- PostWrite- 16-bit legacy interface ports at 0001 0000:06:04.2 FireWire (IEEE 1394): Texas Instruments Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff00 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- x.out.txt Message from syslogd@bird at Wed Jun 29 15:28:13 2005 ... bird kernel: Disabling IRQ #10 - ----------here network stoped to work #dmesg > dmesg.txt #halt - ----------[...everything else is halting fine] acpi_power_off called - ----------the laptop is still on, I reboot it manualy. #cat dmesg.txt oad: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled eth0: network connection down eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled irq 10: nobody cared! [] __report_bad_irq+0x2a/0xa0 [] handle_IRQ_event+0x30/0x70 [] note_interrupt+0x70/0xb0 [] __do_IRQ+0x145/0x160 [] do_IRQ+0x47/0x70 ======================= [] common_interrupt+0x1a/0x20 [] __do_softirq+0x2e/0x90 [] do_softirq+0x41/0x50 ======================= [] irq_exit+0x35/0x40 [] do_IRQ+0x4e/0x70 [] common_interrupt+0x1a/0x20 [] _nv000166rm+0x1f3/0x314 [nvidia] [] proc_kill_inodes+0x16/0xf0 [] remove_proc_entry+0x8f/0x150 [] free_irq+0xb6/0x130 [] nv_kern_close+0xb3/0x130 [nvidia] [] __fput+0x17e/0x190 [] filp_close+0x59/0x90 [] sys_close+0x6b/0xa0 [] syscall_call+0x7/0xb handlers: [] (ohci_irq_handler+0x0/0x7e0) [] (usb_hcd_irq+0x0/0x70) [] (usb_hcd_irq+0x0/0x70) [] (SkY2Isr+0x0/0x270 [sk98lin]) Disabling IRQ #10 NVRM: rm_init_adapter(0) failed # cat x.out.txt _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/bird:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.11-gentoo-r3 i686 [ELF] Current Operating System: Linux bird 2.6.11-gentoo-r11 #1 Wed Jun 29 11:57:40 CEST 2005 i686 Build Date: 10 June 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 29 15:28:08 2005 (==) Using config file: "/etc/X11/xorg.conf" Using vt 7 NVIDIA: could not open the device file /dev/nvidia0 (Input/output error). (EE) NVIDIA(0): The NVIDIA kernel module does not appear to be receiving (EE) NVIDIA(0): interrupts generated by the NVIDIA graphics device. (EE) NVIDIA(0): Please see the FREQUENTLY ASKED QUESTIONS section in the (EE) NVIDIA(0): README for additional information. (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! (EE) NVIDIA(0): *** Aborting *** Fatal server error: AddScreen/ScreenInit failed for driver 0 Please consult the The X.Org Foundation support at http://wiki.X.Org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. # [X.] Other notes, patches, fixes, workarounds: Note: This kernel has been patched with: 1-My own "fixed" DSDT, as an attempt to make it work. http://www.kotarkh.ch/linux/dsdt-before-fix.dsl http://www.kotarkh.ch/linux/dsdt-after-fix.dsl 2-The latest dsk9elin module. Network would not work without it. http://syskonnect.com/syskonnect/support/driver/htm/sk9elin.htm -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFCwvewFm6LaI1U0NERAjgPAKDQHbc7Riphp3XwtSTMPgrUx+6G2gCgx2XP SwJE/hLdVfSvnFdNnNmBU/k= =rEGR -----END PGP SIGNATURE-----