mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Manuel Lauss <mano@roarinelk.homelinux.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.13-rc3-mm3
Date: Sun, 31 Jul 2005 11:04:16 +0200	[thread overview]
Message-ID: <42EC9410.8080107@roarinelk.homelinux.net> (raw)
In-Reply-To: <20050728025840.0596b9cb.akpm@osdl.org>

Hello,

something broke the sonypi driver a bit after -mm2:
I can no longer set bluetooth-power for instance, and it logs these
messages:

sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 605)
sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 607)
sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 594)

setting/getting brightness, getting battery/ac status still work.


The ioports assignments have changed a bit between -mm2 and -mm3:

/proc/ioports on -mm2:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03f6-03f6 : ide0
0400-047f : 0000:00:1f.0
   0400-0403 : PM1a_EVT_BLK
   0404-0405 : PM1a_CNT_BLK
   0408-040b : PM_TMR
   0410-0415 : ACPI CPU throttle
   0420-0420 : PM2_CNT_BLK
   0428-042f : GPE0_BLK
0500-053f : 0000:00:1f.0
   0500-053f : pnp 00:08
0540-055f : 0000:00:1f.3
   0540-054f : i801-smbus
0cf8-0cff : PCI conf1
1080-109f : Sony Programable I/O Device
c000-cfff : PCI Bus #01
   c800-c8ff : 0000:01:00.0
     c800-c8ff : radeonfb
d000-dfff : PCI Bus #02
   d000-d1ff : PCI CardBus #03
   d400-d5ff : PCI CardBus #03
   dc00-dc3f : 0000:02:03.0
     dc00-dc3f : e1000
e000-e03f : 0000:00:1f.5
   e000-e03f : Intel 82801DB-ICH4
e080-e0ff : 0000:00:1f.6
e400-e4ff : 0000:00:1f.6
e800-e81f : 0000:00:1d.0
   e800-e81f : uhci_hcd
e880-e89f : 0000:00:1d.1
   e880-e89f : uhci_hcd
ec00-ec1f : 0000:00:1d.2
   ec00-ec1f : uhci_hcd
ee00-eeff : 0000:00:1f.5
   ee00-eeff : Intel 82801DB-ICH4
fe00-fe01 : motherboard
ffa0-ffaf : 0000:00:1f.1
   ffa0-ffa7 : ide0
   ffa8-ffaf : ide1


/proc/ioports on -mm3:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03f6-03f6 : ide0
0400-047f : 0000:00:1f.0
   0400-0403 : PM1a_EVT_BLK
   0404-0405 : PM1a_CNT_BLK
   0408-040b : PM_TMR
   0410-0415 : ACPI CPU throttle
   0420-0420 : PM2_CNT_BLK
   0428-042f : GPE0_BLK
0500-053f : 0000:00:1f.0
   0500-053f : pnp 00:08
0540-055f : 0000:00:1f.3
   0540-054f : i801-smbus
0cf8-0cff : PCI conf1
1000-1fff : PCI CardBus #03
   1080-109f : Sony Programable I/O Device
2000-2fff : PCI CardBus #03
c000-cfff : PCI Bus #01
   c800-c8ff : 0000:01:00.0
     c800-c8ff : radeonfb
d000-dfff : PCI Bus #02
   dc00-dc3f : 0000:02:03.0
     dc00-dc3f : e1000
e000-e03f : 0000:00:1f.5
   e000-e03f : Intel 82801DB-ICH4
e080-e0ff : 0000:00:1f.6
e400-e4ff : 0000:00:1f.6
e800-e81f : 0000:00:1d.0
   e800-e81f : uhci_hcd
e880-e89f : 0000:00:1d.1
   e880-e89f : uhci_hcd
ec00-ec1f : 0000:00:1d.2
   ec00-ec1f : uhci_hcd
ee00-eeff : 0000:00:1f.5
   ee00-eeff : Intel 82801DB-ICH4
fe00-fe01 : motherboard
ffa0-ffaf : 0000:00:1f.1
   ffa0-ffa7 : ide0
   ffa8-ffaf : ide1


I'd appreciate any hints

Thanks,

-- 
  Manuel Lauss

  parent reply	other threads:[~2005-07-31  9:04 UTC|newest]

Thread overview: 96+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-07-28  9:58 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 10:44 ` [-mm patch] fix MTRR compilation with SMP=n Adrian Bunk
2005-07-28 17:11 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:52   ` 2.6.13-rc3-mm3 Russell King
2005-07-28 20:06     ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:11 ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 19:16   ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 21:40     ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 23:31       ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29  7:06       ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29  9:27         ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 12:01           ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29 14:12           ` Regression hunting with git (was: Re: 2.6.13-rc3-mm3) Matthias Urlichs
2005-07-28 20:34 ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 22:09 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:15   ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 20:56     ` 2.6.13-rc3-mm3 Nick Sillik
2005-07-28 23:16       ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:29   ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 23:29 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 22:02   ` 2.6.13-rc3-mm3 Dirk
2005-07-28 23:46   ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:48     ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29 19:33       ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30  0:00         ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29  5:58 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29  6:08   ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:21     ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 16:15       ` 2.6.13-rc3-mm3 Eric W. Biederman
2005-07-29  6:01 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29  6:10   ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-03  1:17     ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-03  4:21       ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-07 23:23         ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29  6:02 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 23:05 ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-29 23:17   ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30 15:33     ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-30 18:02       ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-01 15:36     ` 2.6.13-rc3-mm3 Bjorn Helgaas
2005-07-30 10:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-07-30 17:05   ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31  9:04 ` Manuel Lauss [this message]
2005-07-31  9:16   ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 11:12     ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 12:46     ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 17:35       ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 18:21         ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:25   ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 18:41     ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:59       ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 21:35     ` 2.6.13-rc3-mm3 Stelian Pop
     [not found]     ` <Pine.LNX.4.58.0507311125360.29650@g5.osdl.org>
     [not found]       ` <1122846072.17880.43.camel@deep-space-9.dsnet>
     [not found]         ` <Pine.LNX.4.58.0507311557020.14342@g5.osdl.org>
2005-08-01 14:37           ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02  9:49             ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02 10:32               ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 11:40                 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 14:04                   ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 15:48                   ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 16:50                     ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 17:11                       ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 21:13                         ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:21                           ` 2.6.13-rc3-mm3 Greg KH
2005-08-02 21:47                             ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:57                               ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 22:59                                 ` [patch 1/2] increase PCIBIOS_MIN_IO on x86 Ivan Kokshaysky
2005-08-02 23:09                                 ` [patch 2/2] ACPI: " Ivan Kokshaysky
2005-08-01  1:43 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 16:10   ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 20:02     ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 20:36       ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:07         ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:16           ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:27             ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:40               ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:52                 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 22:02                   ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 22:19                   ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:01                     ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 23:16                       ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:32                         ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04  0:19                       ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 11:27                         ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04 14:04                           ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 14:37                             ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-05 15:17                               ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-07 13:44                                 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 16:48                                   ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 17:10                                     ` 2.6.13-rc3-mm3 Russell King
2005-08-08 17:15                                       ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 20:40                                     ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 22:12                                     ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-09  0:57                                       ` 2.6.13-rc3-mm3 Christoph Lameter
2005-09-14 14:32 ` 2.6.13-mm3 and 2.6.14-rc1 both broken (SCSI?) Martin J. Bligh
2005-09-14 14:09   ` Anton Blanchard
2005-07-28 10:40 2.6.13-rc3-mm3 Sebastian Kaergel
2005-07-28  9:54 ` 2.6.13-rc3-mm3 Alexandre Buisse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42EC9410.8080107@roarinelk.homelinux.net \
    --to=mano@roarinelk.homelinux.net \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®