From: Michal Simek <monstr@monstr.eu>
To: Michal Simek <michal.simek@xilinx.com>, devicetree@vger.kernel.org
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>,
"Naga Sureshkumar Relli" <naga.sureshkumar.relli@xilinx.com>,
"VNSL Durga" <vnsl.durga.challa@xilinx.com>,
"Masahiro Yamada" <yamada.masahiro@socionext.com>,
"Kedareswara rao Appana" <appanad@xilinx.com>,
linux-kernel@vger.kernel.org,
"Anurag Kumar Vulisha" <anurag.kumar.vulisha@xilinx.com>,
"Alistair Francis" <alistair.francis@xilinx.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Will Deacon" <will.deacon@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Catalin Marinas" <catalin.marinas@arm.com>,
linux-arm-kernel@lists.infradead.org,
"Javier Martinez Canillas" <javier@dowhile0.org>
Subject: Re: [PATCH] arm64: zynqmp: Remove ep108 board
Date: Tue, 17 Jul 2018 16:39:52 +0200 [thread overview]
Message-ID: <42b604af-b9e0-058a-c3eb-e9a5b6c5e5ca@monstr.eu> (raw)
In-Reply-To: <052cdf7d45bb94e106ae33c972a050089ef75803.1523452618.git.michal.simek@xilinx.com>
[-- Attachment #1.1: Type: text/plain, Size: 7791 bytes --]
On 11.4.2018 15:17, Michal Simek wrote:
> ZynqMP Emulation board is no longer tested and there is no reason to
> keep maintaining it.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm64/boot/dts/xilinx/Makefile | 1 -
> .../boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 137 ----------------
> arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 154 ------------------
> 3 files changed, 292 deletions(-)
> delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
> delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
>
> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
> index c2a0c00272e2..d452f80e7601 100644
> --- a/arch/arm64/boot/dts/xilinx/Makefile
> +++ b/arch/arm64/boot/dts/xilinx/Makefile
> @@ -1,5 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
> -dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
> deleted file mode 100644
> index 9f5eedbc2139..000000000000
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
> +++ /dev/null
> @@ -1,137 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * clock specification for Xilinx ZynqMP ep108 development board
> - *
> - * (C) Copyright 2015, Xilinx, Inc.
> - *
> - * Michal Simek <michal.simek@xilinx.com>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - */
> -
> -/ {
> - misc_clk: misc_clk {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <25000000>;
> - };
> -
> - i2c_clk: i2c_clk {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <111111111>;
> - };
> -
> - sata_clk: sata_clk {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <75000000>;
> - };
> -
> - clk100: clk100 {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <100000000>;
> - };
> -
> - clk600: clk600 {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <600000000>;
> - };
> -};
> -
> -&can0 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&can1 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&fpd_dma_chan1 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan2 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan3 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan4 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan5 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan6 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan7 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan8 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&gem0 {
> - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
> -};
> -
> -&gpio {
> - clocks = <&misc_clk>;
> -};
> -
> -&i2c0 {
> - clocks = <&i2c_clk>;
> -};
> -
> -&i2c1 {
> - clocks = <&i2c_clk>;
> -};
> -
> -&sata {
> - clocks = <&sata_clk>;
> -};
> -
> -&sdhci0 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&sdhci1 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&spi0 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&spi1 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&uart0 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&usb0 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&usb1 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&watchdog0 {
> - clocks= <&misc_clk>;
> -};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
> deleted file mode 100644
> index 4b0684911626..000000000000
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
> +++ /dev/null
> @@ -1,154 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * dts file for Xilinx ZynqMP ep108 development board
> - *
> - * (C) Copyright 2014 - 2015, Xilinx, Inc.
> - *
> - * Michal Simek <michal.simek@xilinx.com>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - */
> -
> -/dts-v1/;
> -
> -#include "zynqmp.dtsi"
> -#include "zynqmp-ep108-clk.dtsi"
> -
> -/ {
> - model = "ZynqMP EP108";
> -
> - aliases {
> - mmc0 = &sdhci0;
> - mmc1 = &sdhci1;
> - serial0 = &uart0;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> - memory@0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x40000000>;
> - };
> -};
> -
> -&can0 {
> - status = "okay";
> -};
> -
> -&can1 {
> - status = "okay";
> -};
> -
> -&gem0 {
> - status = "okay";
> - phy-handle = <&phy0>;
> - phy-mode = "rgmii-id";
> - phy0: phy@0 {
> - reg = <0>;
> - max-speed = <100>;
> - };
> -};
> -
> -&gpio {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> - clock-frequency = <400000>;
> - eeprom@54 {
> - compatible = "atmel,24c64";
> - reg = <0x54>;
> - };
> -};
> -
> -&i2c1 {
> - status = "okay";
> - clock-frequency = <400000>;
> - eeprom@55 {
> - compatible = "atmel,24c64";
> - reg = <0x55>;
> - };
> -};
> -
> -&sata {
> - status = "okay";
> - ceva,broken-gen2;
> - /* SATA Phy OOB timing settings */
> - ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
> - ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
> - ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
> - ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
> - ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
> - ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
> - ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
> - ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
> -};
> -
> -&sdhci0 {
> - status = "okay";
> - bus-width = <8>;
> -};
> -
> -&sdhci1 {
> - status = "okay";
> -};
> -
> -&spi0 {
> - status = "okay";
> - num-cs = <1>;
> - spi0_flash0: spi0_flash0@0 {
> - compatible = "m25p80";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - spi-max-frequency = <50000000>;
> - reg = <0>;
> -
> - spi0_flash0@0 {
> - label = "spi0_flash0";
> - reg = <0x0 0x100000>;
> - };
> - };
> -};
> -
> -&spi1 {
> - status = "okay";
> - num-cs = <1>;
> - spi1_flash0: spi1_flash0@0 {
> - compatible = "m25p80";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - spi-max-frequency = <50000000>;
> - reg = <0>;
> -
> - spi1_flash0@0 {
> - label = "spi1_flash0";
> - reg = <0x0 0x100000>;
> - };
> - };
> -};
> -
> -&uart0 {
> - status = "okay";
> -};
> -
> -&usb0 {
> - status = "okay";
> - dr_mode = "peripheral";
> - maximum-speed = "high-speed";
> -};
> -
> -&usb1 {
> - status = "okay";
> - dr_mode = "host";
> - maximum-speed = "high-speed";
> -};
> -
> -&watchdog0 {
> - status = "okay";
> -};
>
Applied.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
prev parent reply other threads:[~2018-07-17 14:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-11 13:17 Michal Simek
2018-07-17 14:39 ` Michal Simek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42b604af-b9e0-058a-c3eb-e9a5b6c5e5ca@monstr.eu \
--to=monstr@monstr.eu \
--cc=alistair.francis@xilinx.com \
--cc=anurag.kumar.vulisha@xilinx.com \
--cc=appanad@xilinx.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=javier@dowhile0.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=naga.sureshkumar.relli@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=soren.brinkmann@xilinx.com \
--cc=vnsl.durga.challa@xilinx.com \
--cc=will.deacon@arm.com \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®