From: Luben Tuikov <luben_tuikov@adaptec.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: [PATCH 2.6.13 6/14] sas-class: sas_dump.c Debug/dumping utility
Date: Fri, 09 Sep 2005 15:40:27 -0400 [thread overview]
Message-ID: <4321E52B.5000200@adaptec.com> (raw)
Signed-off-by: Luben Tuikov <luben_tuikov@adaptec.com>
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/drivers/scsi/sas-class/sas_dump.c linux-2.6.13/drivers/scsi/sas-class/sas_dump.c
--- linux-2.6.13-orig/drivers/scsi/sas-class/sas_dump.c 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/drivers/scsi/sas-class/sas_dump.c 2005-09-09 11:14:29.000000000 -0400
@@ -0,0 +1,77 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/sas-class/sas_dump.c#4 $
+ */
+
+#include "sas_dump.h"
+
+#ifdef SAS_DEBUG
+
+static const char *sas_hae_str[] = {
+ [0] = "HAE_RESET",
+};
+
+static const char *sas_porte_str[] = {
+ [0] = "PORTE_BYTES_DMAED",
+ [1] = "PORTE_BROADCAST_RCVD",
+ [2] = "PORTE_LINK_RESET_ERR",
+ [3] = "PORTE_TIMER_EVENT",
+ [4] = "PORTE_HARD_RESET",
+};
+
+static const char *sas_phye_str[] = {
+ [0] = "PHYE_LOSS_OF_SIGNAL",
+ [1] = "PHYE_OOB_DONE",
+ [2] = "PHYE_OOB_ERROR",
+ [3] = "PHYE_SPINUP_HOLD",
+};
+
+void sas_dprint_porte(int phyid, enum port_event pe)
+{
+ SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
+}
+void sas_dprint_phye(int phyid, enum phy_event pe)
+{
+ SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
+}
+
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
+{
+ SAS_DPRINTK("ha %s: %s event\n", pci_name(sas_ha->pcidev),
+ sas_hae_str[he]);
+}
+
+void sas_dump_port(struct sas_port *port)
+{
+ SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
+ SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->sas_addr));
+ SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->attached_sas_addr));
+ SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
+ SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
+ SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
+ SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
+}
+
+#endif /* SAS_DEBUG */
reply other threads:[~2005-09-09 19:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4321E52B.5000200@adaptec.com \
--to=luben_tuikov@adaptec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®