From: Michal Simek <michal.simek@xilinx.com>
To: Zach Brown <zach.brown@ni.com>, <adrian.hunter@intel.com>
Cc: <robh+dt@kernel.org>, <ulf.hansson@linaro.org>,
<mark.rutland@arm.com>, <linux-mmc@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<michal.simek@xilinx.com>, <soren.brinkmann@xilinx.com>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present
Date: Wed, 7 Sep 2016 07:15:02 +0200 [thread overview]
Message-ID: <43273dd9-16d9-e6cb-49cd-fb924310a386@xilinx.com> (raw)
In-Reply-To: <1473194084-14485-2-git-send-email-zach.brown@ni.com>
On 6.9.2016 22:34, Zach Brown wrote:
> The sdhci controller on xilinx zynq devices will not function unless
> the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
> In cases where it is impossible to provide the CD bit in hardware,
> setting the controller to test mode and then setting inserted to true
> will get the controller to function without the CD bit.
>
> When the device has the property xlnx-fails-without-test-cd the driver
> changes the controller to test mode and sets test inserted to true to
> make the controller function.
>
> Signed-off-by: Zach Brown <zach.brown@ni.com>
> ---
> drivers/mmc/host/sdhci-of-arasan.c | 34 +++++++++++++++++++++++++++++++++-
> drivers/mmc/host/sdhci.h | 2 ++
> 2 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index b6f4c1d..63b0c2a 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -23,6 +23,7 @@
> #include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include "sdhci-pltfm.h"
> +#include <linux/of.h>
>
> #define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
>
> @@ -38,6 +39,10 @@
> struct sdhci_arasan_data {
> struct clk *clk_ahb;
> struct phy *phy;
> + unsigned int arasan_quirks; /* Arasan deviations from spec */
> +
> +/* Controller does not have CD wired and will not function normally without */
> +#define SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD (1<<0)
Also here. If it is fine not to use BIT macro here you should at least
fix coding style (1 << 0)
> };
>
> static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
> @@ -79,12 +84,32 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
> }
> }
>
> +void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
> +{
> + u8 ctrl;
> + struct sdhci_pltfm_host *pltfm_host;
> + struct sdhci_arasan_data *sdhci_arasan;
> +
> + sdhci_reset(host, mask);
> +
> + pltfm_host = sdhci_priv(host);
> + sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> +
> + if (sdhci_arasan->arasan_quirks &
> + SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD) {
> + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> + ctrl |= SDHCI_CTRL_CDTEST_INS |
> + SDHCI_CTRL_CDTEST_EN;
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> + }
> +}
> +
> static struct sdhci_ops sdhci_arasan_ops = {
> .set_clock = sdhci_arasan_set_clock,
> .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> .get_timeout_clock = sdhci_arasan_get_timeout_clock,
> .set_bus_width = sdhci_set_bus_width,
> - .reset = sdhci_reset,
> + .reset = sdhci_arasan_reset,
> .set_uhs_signaling = sdhci_set_uhs_signaling,
> };
>
> @@ -179,6 +204,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> struct sdhci_host *host;
> struct sdhci_pltfm_host *pltfm_host;
> struct sdhci_arasan_data *sdhci_arasan;
> + struct device_node *np = pdev->dev.of_node;
>
> host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata,
> sizeof(*sdhci_arasan));
> @@ -215,6 +241,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> }
>
> sdhci_get_of_property(pdev);
> +
> + if (of_get_property(np, "xlnx-fails-without-test-cd", NULL)) {
> + sdhci_arasan->arasan_quirks |=
> + SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD;
> + }
> +
> pltfm_host->clk = clk_xin;
>
> ret = mmc_of_parse(host->mmc);
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 609f87c..ac0ba18 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -84,6 +84,8 @@
> #define SDHCI_CTRL_ADMA32 0x10
> #define SDHCI_CTRL_ADMA64 0x18
> #define SDHCI_CTRL_8BITBUS 0x20
> +#define SDHCI_CTRL_CDTEST_INS 0x40
> +#define SDHCI_CTRL_CDTEST_EN 0x80
The issue is still present here.
Thanks,
Michal
next prev parent reply other threads:[~2016-09-07 5:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-06 20:34 [PATCH v4 1/2] sdhci-of-arasan: Add device tree parameter xlnx-fails-without-test-cd bit Zach Brown
2016-09-06 20:34 ` [PATCH v4 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present Zach Brown
2016-09-07 5:15 ` Michal Simek [this message]
2016-09-07 16:06 ` Zach Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43273dd9-16d9-e6cb-49cd-fb924310a386@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=adrian.hunter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=soren.brinkmann@xilinx.com \
--cc=ulf.hansson@linaro.org \
--cc=zach.brown@ni.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome