Linux version 2.6.12.3-08-05-2005 (root@tadakichi) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-47.fc4)) #3 Fri Aug 5 16:18:30 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffe2800 (usable) BIOS-e820: 000000003ffe2800 - 0000000040000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262114 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32738 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000fde50 ACPI: RSDT (v001 DELL CPi R 0x27d20404 ASL 0x00000061) @ 0x000fde64 ACPI: FADT (v001 DELL CPi R 0x27d20404 ASL 0x00000061) @ 0x000fde90 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 40000000 (gap: 40000000:beda0000) Built 1 zonelists Kernel command line: ro root=LABEL=/ acpi=force single Initializing CPU#0 CPU 0 irqstacks, hard=c059a000 soft=c0599000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1595.382 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032388k/1048456k available (3476k kernel code, 15144k reserved, 1020k data, 184k init, 130952k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3153.92 BogoMIPS (lpj=1576960) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0800) checking if image is initramfs... it is Freeing initrd memory: 984k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: Power Resource [PADA] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices Dell laptop SMM driver v1.13 14/05/2002 Massimo Dal Zotto (dz@debian.org) Linux Kernel Card Services options: [pci] [cardbus] [pm] usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 23 pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x800-0x805 could not be reserved pnp: 00:01: ioport range 0x808-0x80f could not be reserved pnp: 00:02: ioport range 0x806-0x807 has been reserved pnp: 00:02: ioport range 0x810-0x85f could not be reserved pnp: 00:02: ioport range 0x860-0x87f has been reserved pnp: 00:02: ioport range 0x880-0x8bf has been reserved pnp: 00:02: ioport range 0x8c0-0x8ff has been reserved pnp: 00:03: ioport range 0xf000-0xf0fe has been reserved pnp: 00:03: ioport range 0xf100-0xf1fe has been reserved pnp: 00:03: ioport range 0xf200-0xf2fe has been reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0xf500-0xf5fe has been reserved pnp: 00:03: ioport range 0xf600-0xf6fe has been reserved pnp: 00:03: ioport range 0xf800-0xf8fe has been reserved pnp: 00:03: ioport range 0xf900-0xf9fe has been reserved pnp: 00:08: ioport range 0x900-0x91f has been reserved pnp: 00:08: ioport range 0x3f0-0x3f1 has been reserved apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1126816869.082:0): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.22 [Flags: R/O]. SELinux: Registering netfilter hooks Initializing Cryptographic API ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Battery Slot [BAT1] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM] (63 C) Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: AGP aperture is 64M @ 0xe8000000 [drm] Initialized drm 1.0.0 20040925 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using monotonic_clock(). PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: HTS548040M9AT00, ATA DISK drive hdb: TEAC CD-RW CD-W224E, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... hdc: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 > hdb: ATAPI 24X CD-ROM CD-R/RW drive, 1280kB Cache Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache ide-floppy driver 0.99.newide ieee1394: Initialized config rom entry `ip1394' usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 Disabled Privacy Extensions on device c050f860(lo) IPv6 over IPv4 tunneling driver input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 17 Software Suspend Core. Software Suspend Compression Driver loading. Software Suspend Encryption Driver loading. Software Suspend userspace UI support loading. Software Suspend Swap Writer loading. ACPI wakeup devices: LID PBTN PCI0 UAR1 USB0 USB1 USB2 MODM PCIE MPCI ACPI: (supports S0 S1 S3 S4 S4bios S5) Freeing unused kernel memory: 184k freed EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds alps.c: Enabling hardware tapping input: DualPoint Stick on isa0060/serio1 input: AlpsPS/2 ALPS DualPoint TouchPad on isa0060/serio1 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) wlan: 0.8.6.0 (EXPERIMENTAL) ath_rate_sample: 1.2 ath_pci: 0.9.6.0 (EXPERIMENTAL) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:00.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.19 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49392 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.6 to 64 MC'97 1 converters and GPIO not ready (0xff00) codec_semaphore: semaphore is not ready [0x1][0x300300] codec_write 1: semaphore is not ready for register 0x54 hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Enabling device 0000:02:01.0 (0000 -> 0002) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d4] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000020 PCI: Enabling device 0000:02:01.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d4] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000061 PCI: Enabling device 0000:03:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Build date: Aug 7 2005 Debugging version (IEEE80211) ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: H/W encryption support: WEP AES AES_CCM TKIP ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) ath0: Atheros 5212: mem=0x40800000, irq=11 ohci1394: $Rev: 1250 $ Ben Collins ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f8fff000-f8fff7ff] Max Packet=[2048] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Enabling device 0000:07:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:07:00.0 to 64 ohci_hcd 0000:07:00.0: OHCI Host Controller ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:07:00.0: irq 11, io mem 0x41000000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc000270ec421] PCI: Enabling device 0000:07:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:07:00.1 to 64 ohci_hcd 0000:07:00.1: OHCI Host Controller ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:07:00.1: irq 11, io mem 0x41001000 audit(1126816894.999:0): user pid=1469 uid=0 length=52 loginuid=4294967295 msg='hwclock: op=changing system time id=0 res=success' hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Enabling device 0000:07:00.2 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.2[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:07:00.2: EHCI Host Controller ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:07:00.2: irq 11, io mem 0x41002000 ehci_hcd 0000:07:00.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected spurious 8259A interrupt: IRQ7. EXT3 FS on hda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 610460k swap on /dev/hda3. Priority:-1 extents:1 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 eth0: no IPv6 routers present