From: Jamal Shareef <jamal.k.shareef@gmail.com>
To: outreachy-kernel@googlegroups.com
Cc: thierry.reding@gmail.com, airlied@linux.ie, daniel@ffwll.ch,
jonathanh@nvidia.com, dri-devel@lists.freedesktop.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
Jamal Shareef <jamal.k.shareef@gmail.com>
Subject: [PATCH 2/3] drm/tegra: dsi: Remove space in open parenthesis
Date: Mon, 4 Nov 2019 18:23:21 -0800 [thread overview]
Message-ID: <4357d243bdb0ac22a36f3edb0f08820fbc31348b.1572920482.git.jamal.k.shareef@gmail.com> (raw)
In-Reply-To: <cover.1572920482.git.jamal.k.shareef@gmail.com>
In-Reply-To: <cover.1572920482.git.jamal.k.shareef@gmail.com>
Removes space after open left parenthesis. Issue found by checkpatch.
Signed-off-by: Jamal Shareef <jamal.k.shareef@gmail.com>
---
drivers/gpu/drm/tegra/dsi.c | 60 ++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index a5d47e301c5f..5966d33831e4 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -283,32 +283,32 @@ static void tegra_dsi_early_unregister(struct drm_connector *connector)
* non-burst mode with sync pulses
*/
static const u32 pkt_seq_video_non_burst_sync_pulses[NUM_PKT_SEQ] = {
- [ 0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
+ [0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
PKT_LP,
- [ 1] = 0,
- [ 2] = PKT_ID0(MIPI_DSI_V_SYNC_END) | PKT_LEN0(0) |
+ [1] = 0,
+ [2] = PKT_ID0(MIPI_DSI_V_SYNC_END) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
PKT_LP,
- [ 3] = 0,
- [ 4] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
+ [3] = 0,
+ [4] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
PKT_LP,
- [ 5] = 0,
- [ 6] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
+ [5] = 0,
+ [6] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0),
- [ 7] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(2) |
+ [7] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(2) |
PKT_ID1(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN1(3) |
PKT_ID2(MIPI_DSI_BLANKING_PACKET) | PKT_LEN2(4),
- [ 8] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
+ [8] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
PKT_LP,
- [ 9] = 0,
+ [9] = 0,
[10] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0),
@@ -321,26 +321,26 @@ static const u32 pkt_seq_video_non_burst_sync_pulses[NUM_PKT_SEQ] = {
* non-burst mode with sync events
*/
static const u32 pkt_seq_video_non_burst_sync_events[NUM_PKT_SEQ] = {
- [ 0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
+ [0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
- [ 1] = 0,
- [ 2] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
+ [1] = 0,
+ [2] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
- [ 3] = 0,
- [ 4] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
+ [3] = 0,
+ [4] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
- [ 5] = 0,
- [ 6] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
+ [5] = 0,
+ [6] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(2) |
PKT_ID2(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN2(3),
- [ 7] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(4),
- [ 8] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
+ [7] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(4),
+ [8] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
- [ 9] = 0,
+ [9] = 0,
[10] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(2) |
PKT_ID2(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN2(3),
@@ -348,16 +348,16 @@ static const u32 pkt_seq_video_non_burst_sync_events[NUM_PKT_SEQ] = {
};
static const u32 pkt_seq_command_mode[NUM_PKT_SEQ] = {
- [ 0] = 0,
- [ 1] = 0,
- [ 2] = 0,
- [ 3] = 0,
- [ 4] = 0,
- [ 5] = 0,
- [ 6] = PKT_ID0(MIPI_DSI_DCS_LONG_WRITE) | PKT_LEN0(3) | PKT_LP,
- [ 7] = 0,
- [ 8] = 0,
- [ 9] = 0,
+ [0] = 0,
+ [1] = 0,
+ [2] = 0,
+ [3] = 0,
+ [4] = 0,
+ [5] = 0,
+ [6] = PKT_ID0(MIPI_DSI_DCS_LONG_WRITE) | PKT_LEN0(3) | PKT_LP,
+ [7] = 0,
+ [8] = 0,
+ [9] = 0,
[10] = PKT_ID0(MIPI_DSI_DCS_LONG_WRITE) | PKT_LEN0(5) | PKT_LP,
[11] = 0,
};
--
2.17.1
next prev parent reply other threads:[~2019-11-05 2:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-05 2:23 [PATCH 0/3] drm/tegra: Remove space after parenthesis Jamal Shareef
2019-11-05 2:23 ` [PATCH 1/3] drm/tegra: dc: " Jamal Shareef
2019-11-05 2:23 ` Jamal Shareef [this message]
2019-11-05 2:23 ` [PATCH 3/3] drm/tegra: gr3d: " Jamal Shareef
2019-11-05 4:53 ` [PATCH 0/3] drm/tegra: " Michał Mirosław
2019-11-05 4:59 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4357d243bdb0ac22a36f3edb0f08820fbc31348b.1572920482.git.jamal.k.shareef@gmail.com \
--to=jamal.k.shareef@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®