mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dan Carpenter <dan.carpenter@linaro.org>
To: Erick Archer <erick.archer@gmx.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Jeffrey Hugo <quic_jhugo@quicinc.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Dan Carpenter <error27@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"Gustavo A. R. Silva" <gustavoars@kernel.org>,
	linux-arm-msm@vger.kernel.org, mhi@lists.linux.dev,
	linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org
Subject: Re: [PATCH] bus: mhi: ep: Use kcalloc() instead of kzalloc()
Date: Mon, 22 Jan 2024 10:15:20 +0300	[thread overview]
Message-ID: <43614a09-d520-4111-873a-b352bd93ea07@moroto.mountain> (raw)
In-Reply-To: <20240120152518.13006-1-erick.archer@gmx.com>

This code does not have an integer overflow, but it might have a
different memory corruption bug.

On Sat, Jan 20, 2024 at 04:25:18PM +0100, Erick Archer wrote:
> As noted in the "Deprecated Interfaces, Language Features, Attributes,
> and Conventions" documentation [1], size calculations (especially
> multiplication) should not be performed in memory allocator (or similar)
> function arguments due to the risk of them overflowing. This could lead
> to values wrapping around and a smaller allocation being made than the
> caller was expecting. Using those allocations could lead to linear
> overflows of heap memory and other misbehaviors.
> 
> So, use the purpose specific kcalloc() function instead of the argument
> count * size in the kzalloc() function.
> 

This one is more complicated to analyze.  I have built a Smatch cross
function database so it's easy for me and I will help you.

$ smbd.py where mhi_ep_cntrl event_rings
drivers/pci/endpoint/functions/pci-epf-mhi.c | pci_epf_mhi_probe              | (struct mhi_ep_cntrl)->event_rings | 0
drivers/bus/mhi/ep/main.c      | mhi_ep_irq                     | (struct mhi_ep_cntrl)->event_rings | min-max
drivers/bus/mhi/ep/mmio.c      | mhi_ep_mmio_init               | (struct mhi_ep_cntrl)->event_rings | 0-255
drivers/bus/mhi/ep/mmio.c      | mhi_ep_mmio_update_ner         | (struct mhi_ep_cntrl)->event_rings | 0-255

The other way to figure this stuff out would be to do:

$ grep -Rn "event_rings = " drivers/bus/mhi/ep/
drivers/bus/mhi/ep/mmio.c:260:  mhi_cntrl->event_rings = FIELD_GET(MHICFG_NER_MASK, regval);
drivers/bus/mhi/ep/mmio.c:261:  mhi_cntrl->hw_event_rings = FIELD_GET(MHICFG_NHWER_MASK, regval);
drivers/bus/mhi/ep/mmio.c:271:  mhi_cntrl->event_rings = FIELD_GET(MHICFG_NER_MASK, regval);
drivers/bus/mhi/ep/mmio.c:272:  mhi_cntrl->hw_event_rings = FIELD_GET(MHICFG_NHWER_MASK, regval);

That means that this multiplication can never overflow so the patch
has no effect on runtime.  The patch is still useful because we don't
want every single person to have to do this analysis.  The kcalloc()
function is just safer and more obviously correct.

It's a bit concerning that ->event_rings is set multiple times, but only
allocated one time.  It's either unnecessary or there is a potential
memory corruption bug.  If it's really necessary then there should be a
check that the new size is <= the size of the original buffer that we
allocated.

I work in static analysis and I understand the struggle of trying to
understand code to see if static checker warnings are a real bug or not.
I'm not going to insist that you figure everything out, but I am asking
that you at least try.  If after spending ten minutes reading the code
you can't figure it out, then it's fine to write something like, "I
don't know whether this multiply can really overflow or not, but let's
make it safer by using kcalloc()."  You can put that sort of "I don't
know information" under the --- cut off line inf you want.

regards,
dan carpenter

  reply	other threads:[~2024-01-22  7:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-20 15:25 Erick Archer
2024-01-22  7:15 ` Dan Carpenter [this message]
2024-01-28 10:29   ` Erick Archer
2024-01-29  5:20     ` Dan Carpenter
2024-02-02 17:48       ` Erick Archer
2024-01-30  8:34   ` Manivannan Sadhasivam
2024-01-22 17:50 ` Gustavo A. R. Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43614a09-d520-4111-873a-b352bd93ea07@moroto.mountain \
    --to=dan.carpenter@linaro.org \
    --cc=erick.archer@gmx.com \
    --cc=error27@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gustavoars@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mhi@lists.linux.dev \
    --cc=quic_jhugo@quicinc.com \
    --cc=rafael@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®