I recently purchased a Tyan S2892. It has 16GB ram, two 2GHz opteron processors, a 3ware 9500s raid controller and an Nvidia 6600 video card. The board has an ATI Rage XL controller, Broadcom 5704C dual 1000Gb ethernet with a third 100Mb ethernet. There is an Nvidia nForce4 Professional bridge that controls the SATA, USB2, PCI-E and PCI-X. About every hour I get a system crash of the form: [ 835.107799] CPU 0: Machine Check Exception: 4 Bank 4: f62c20013d080813 [ 835.230479] TSC 1872b5c36c0 ADDR 1da1a8000 [ 835.285662] Kernel panic - not syncing: Machine check [ 835.352171] <7>ohci_hcd 0000:00:02.0: urb ffff810008033d40 path 3.1 ep2in 5e160000 cc 5 --> status -110 [ 5284.280575] CPU 0: Machine Check Exception: 7 Bank 4: f476200079080a13 [ 5284.402845] RIP 10: {acpi_processor_idle+0x12f/0x37e} [ 5284.489679] TSC 9ab301d32e0 ADDR 179cad000 [ 5284.544524] Kernel panic - not syncing: Uncorrected machine check [ 5284.624502] <7>ohci_hcd 0000:00:02.0: urb ffff8103ffc50900 path 3.1 ep1in 5e160000 cc 5 --> status -110 I have attached my kernel boot listing and my .config file. I am running 2.6.14. Is the Nvidia bridge supported? I appears it must be since it works for so long. Any advice would be appreciated. If this is the wrong list please redirect. Thanks in advance, don -- ------------------------------------------------------------------- | Don Fisher dfisher@as.arizona.edu | | Steward Observatory | | 933 N. Cherry Ave. VOICE: (520)888-7613 | | University of Arizona | | Tucson, AZ 85721 | -------------------------------------------------------------------