Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails

[Thinh Nguyen <Thinh.Nguyen@synopsys.com>]

Wesley Cheng wrote:
> Hi Thinh,
> 
> On 2/24/2022 5:26 PM, Thinh Nguyen wrote:
>> Hi Wesley,
>>
>> Wesley Cheng wrote:
>>> Hi Thinh,
>>>
>>> On 2/22/2022 6:59 PM, Thinh Nguyen wrote:
>>>> Hi Wesley,
>>>>
>>
>> <snip>
>>
>>>>
>>>> Can you provide a full trace?
>>>>
>>> Sorry for doing this, but we didn't have a way to share the file
>>> directly, so I have to paste the trace below. :/
>>>
>>>> Btw, when you experiment with increasing the timeout to 10 seconds, did
>>>> you use the mdelay() in each loop? The delta time for End Transfer
>>>> timeout here seems very small.
>>>>
>>> This particular run did not modify the timeout for the cmd status polling.
>>>
>>> Is that something that you want to try?  Not pertaining to this dequeue
>>> situation, during the pullup disable path debug, I noticed that as long
>>> as there was a pending EP0 SETUP packet (not data/status) cached in the
>>> controller, it would also have endxfer timeouts on non-control EPs.  We
>>> were able to capture a bus sniffer log + ftrace, and it showed that at
>>> the point of the error, the lecroy/bus log saw a SETUP token ACK'ed,
>>> while on the ftrace, there were endxfer timeouts for all non-control EPs
>>> (due to the dwc3_gadget_stop_active_transfers() call)
>>>
>>> Thanks
>>> Wesley
>>>
>>> TRACE
>>> ---------------------------------------------------------------------
>>>
>>
>> <snip>
>>
>>> [ 1023.912550050       0x4af666fd2]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep4in)
>>> [ 1023.912934738       0x4af668cab]   dbg_send_ep_cmd: ep0out: cmd 'Set
>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1023.913361561       0x4af66acae]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1024.336480573       0x4afe2a29b]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep5in)
>>> [ 1024.336855573       0x4afe2bebc]   dbg_send_ep_cmd: ep5in: cmd 'Clear
>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1024.337264531       0x4afe2dd68]   dbg_send_ep_cmd: ep0in: cmd 'Start
>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>> [ 1024.351910156       0x4afe727d4]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1024.363139896       0x4afea720f]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep4in)
>>> [ 1024.363898281       0x4afeaaaf0]   dbg_send_ep_cmd: ep0out: cmd 'Set
>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1024.364734010       0x4afeae99e]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1024.776173803       0x4b063739a]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep5in)
>>> [ 1024.776907188       0x4b063aa9b]   dbg_send_ep_cmd: ep5in: cmd 'Clear
>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1024.777646147       0x4b063e208]   dbg_send_ep_cmd: ep0in: cmd 'Start
>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>> [ 1024.788641980       0x4b0671ab8]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1024.799682397       0x4b06a56bf]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep4in)
>>> [ 1024.800442605       0x4b06a8fc3]   dbg_send_ep_cmd: ep0out: cmd 'Set
>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1024.801184584       0x4b06ac769]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1025.222173752       0x4b0e61d99]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep5in)
>>> [ 1025.222991669       0x4b0e65af1]   dbg_send_ep_cmd: ep5in: cmd 'Clear
>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1025.223850731       0x4b0e69b5f]   dbg_send_ep_cmd: ep0in: cmd 'Start
>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>> [ 1025.239023492       0x4b0eb0d54]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1025.248963179       0x4b0edf6ce]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep4in)
>>> [ 1025.249709846       0x4b0ee2ecd]   dbg_send_ep_cmd: ep0out: cmd 'Set
>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1025.250533440       0x4b0ee6c93]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1025.667084535       0x4b16875e7]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep5in)
>>> [ 1025.667827764       0x4b168ada6]   dbg_send_ep_cmd: ep5in: cmd 'Clear
>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1025.668635993       0x4b168ea44]   dbg_send_ep_cmd: ep0in: cmd 'Start
>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>> [ 1025.674777764       0x4b16ab6e7]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1025.684733597       0x4b16da197]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep4in)
>>> [ 1025.685336150       0x4b16dcec7]   dbg_send_ep_cmd: ep0out: cmd 'Set
>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1025.686112608       0x4b16e0904]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>> Successful
>>> [ 1025.698842347       0x4b171c3bf]   dbg_send_ep_cmd: ep0out: cmd 'Set
>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1026.444051569       0x4b24c1670]   dbg_send_ep_cmd: ep0out: cmd
>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: No
>>> Resource
>>
>> Why did this fail with No Resource? Was it sent before the control TRB
>> completion?
>>
>>> [ 1027.225705425       0x4b3311678]   dbg_trace_log_ctrl: Clear Endpoint
>>> Feature(Halt ep5in)
>>> [ 1027.225820165       0x4b3311f14]   dbg_send_ep_cmd: ep5in: cmd 'Clear
>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>> [ 1027.225931467       0x4b331276c]   dbg_send_ep_cmd: ep0in: cmd 'Start
>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>> [ 1027.234311467       0x4b3339bed]   dbg_ep_dequeue: ep7in: req
>>> ffffff87f99b8f00 length 0/61696 zsI ==> -115
>>> [ 1027.247409123       0x4b337723f]   dbg_send_ep_cmd: ep7in: cmd 'End
>>> Transfer' [f0d08] params 00000000 00000000 00000000 --> status: Timed Out
>>>
>>
>> If the Start Transfer for ep0 failed and the Setup packet can't be
>> DMA'ed out, the End Transfer may not go through.
>>
>> Can you leave the log unfiltered and is it possible to send as
>> attachment? It's missing some important info in this log.
>>
> Are there any specific logs you were looking for?
> trace_dwc3_event
> trace_dwc3_prepare_trb
> 
> Part of reproducing this issue will not allow me to enable tracing, so I
> have to make changes in our driver to reroute the logs elsewhere.  So
> far I've added changes to do:
> 	trace_dwc3_ctrl_req
> 	trace_dwc3_ep_queue
> 	trace_dwc3_ep_dequeue
> 	trace_dwc3_gadget_giveback
> 	trace_dwc3_gadget_ep_cmd
> 
> I can add the above 2 tracepoints as well, but wondering if you needed
> anything else.
> 

If possible, please have these in addition to the above.

trace_dwc3_event
trace_dwc3_complete_trb

Thanks,
Thinh