From: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: bhelgaas@google.com, kishon@ti.com, linux-pci@vger.kernel.org,
adouglas@cadence.com, stelford@cadence.com, dgary@cadence.com,
kgopi@cadence.com, eandrews@cadence.com,
thomas.petazzoni@free-electrons.com, sureshp@cadence.com,
nsekhar@ti.com, linux-kernel@vger.kernel.org, robh@kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v3 3/6] PCI: Add generic function to probe PCI host controllers
Date: Thu, 18 Jan 2018 23:58:43 +0100 [thread overview]
Message-ID: <43b6ad03-dac6-0f46-9595-59bcfda65ad2@free-electrons.com> (raw)
In-Reply-To: <20180116152521.GB17237@red-moon>
Hi Lorenzo,
Le 16/01/2018 à 16:25, Lorenzo Pieralisi a écrit :
> On Wed, Jan 10, 2018 at 11:47:32PM +0100, Cyrille Pitchen wrote:
>> This patchs moves generic source code from
>> drivers/pci/host/pci-host-common.c into drivers/pci/probe.c.
>>
>> Indeed the extracted lines of code were duplicated by many host
>> controller drivers. Regrouping them into a generic function gives a
>> change to properly share this code without introducing a useless
>> dependency to PCI_HOST_COMMON, which selects PCI_ECAM when not needed by
>> most host controller drivers.
>>
>> We also add a missing call of pci_free_resource_list() from
>> pci_host_common_probe() when probing fails, as done inside gen_pci_init()
> I have to ask you to split this change into another patch.
>
> First add the missing pci_free_resource_list() then add this patch.
>
> Do you have time to respin quickly ? I would like to merge this
> series for v4.16.
>
Sorry, I've been a little bit busy. I've just done it and submit v4.
patch 3 from v3 split into patches 3 and 4 in v4.
Best regards,
Cyrille
> Thanks,
> Lorenzo
>
>> when this later function fails.
>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
>> ---
>> drivers/pci/host/pci-host-common.c | 25 +++----------------------
>> drivers/pci/probe.c | 33 +++++++++++++++++++++++++++++++++
>> include/linux/pci.h | 1 +
>> 3 files changed, 37 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c
>> index a613ea310e76..df25b4a4edaf 100644
>> --- a/drivers/pci/host/pci-host-common.c
>> +++ b/drivers/pci/host/pci-host-common.c
>> @@ -72,7 +72,6 @@ int pci_host_common_probe(struct platform_device *pdev,
>> const char *type;
>> struct device *dev = &pdev->dev;
>> struct device_node *np = dev->of_node;
>> - struct pci_bus *bus, *child;
>> struct pci_host_bridge *bridge;
>> struct pci_config_window *cfg;
>> struct list_head resources;
>> @@ -107,29 +106,11 @@ int pci_host_common_probe(struct platform_device *pdev,
>> bridge->map_irq = of_irq_parse_and_map_pci;
>> bridge->swizzle_irq = pci_common_swizzle;
>>
>> - ret = pci_scan_root_bus_bridge(bridge);
>> - if (ret < 0) {
>> - dev_err(dev, "Scanning root bridge failed");
>> + ret = pci_host_probe(bridge);
>> + if (ret) {
>> + pci_free_resource_list(&resources);
>> return ret;
>> }
>>
>> - bus = bridge->bus;
>> -
>> - /*
>> - * We insert PCI resources into the iomem_resource and
>> - * ioport_resource trees in either pci_bus_claim_resources()
>> - * or pci_bus_assign_resources().
>> - */
>> - if (pci_has_flag(PCI_PROBE_ONLY)) {
>> - pci_bus_claim_resources(bus);
>> - } else {
>> - pci_bus_size_bridges(bus);
>> - pci_bus_assign_resources(bus);
>> -
>> - list_for_each_entry(child, &bus->children, node)
>> - pcie_bus_configure_settings(child);
>> - }
>> -
>> - pci_bus_add_devices(bus);
>> return 0;
>> }
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index 1360db508035..178328d06a32 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -2685,6 +2685,39 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>> }
>> EXPORT_SYMBOL_GPL(pci_create_root_bus);
>>
>> +int pci_host_probe(struct pci_host_bridge *bridge)
>> +{
>> + struct pci_bus *bus, *child;
>> + int ret;
>> +
>> + ret = pci_scan_root_bus_bridge(bridge);
>> + if (ret < 0) {
>> + dev_err(bridge->dev.parent, "Scanning root bridge failed");
>> + return ret;
>> + }
>> +
>> + bus = bridge->bus;
>> +
>> + /*
>> + * We insert PCI resources into the iomem_resource and
>> + * ioport_resource trees in either pci_bus_claim_resources()
>> + * or pci_bus_assign_resources().
>> + */
>> + if (pci_has_flag(PCI_PROBE_ONLY)) {
>> + pci_bus_claim_resources(bus);
>> + } else {
>> + pci_bus_size_bridges(bus);
>> + pci_bus_assign_resources(bus);
>> +
>> + list_for_each_entry(child, &bus->children, node)
>> + pcie_bus_configure_settings(child);
>> + }
>> +
>> + pci_bus_add_devices(bus);
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(pci_host_probe);
>> +
>> int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
>> {
>> struct resource *res = &b->busn_res;
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index a1b0672fd38a..0ca261fda900 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -879,6 +879,7 @@ struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
>> struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>> struct pci_ops *ops, void *sysdata,
>> struct list_head *resources);
>> +int pci_host_probe(struct pci_host_bridge *bridge);
>> int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
>> int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
>> void pci_bus_release_busn_res(struct pci_bus *b);
>> --
>> 2.11.0
>>
>
--
Cyrille Pitchen, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2018-01-18 22:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-10 22:47 [PATCH v3 0/6] PCI: Add support to the Cadence PCIe controller Cyrille Pitchen
2018-01-10 22:47 ` [PATCH v3 1/6] PCI: Regroup all PCI related entries into drivers/pci/Makefile Cyrille Pitchen
2018-01-10 22:47 ` [PATCH v3 2/6] PCI: OF: Add generic function to parse and allocate PCI resources Cyrille Pitchen
2018-01-10 22:47 ` [PATCH v3 3/6] PCI: Add generic function to probe PCI host controllers Cyrille Pitchen
2018-01-16 15:25 ` Lorenzo Pieralisi
2018-01-18 22:58 ` Cyrille Pitchen [this message]
2018-01-10 22:47 ` [PATCH v3 4/6] PCI: Add vendor ID for Cadence Cyrille Pitchen
2018-01-10 22:47 ` [PATCH v3 5/6] dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller Cyrille Pitchen
2018-01-10 22:47 ` [PATCH v3 6/6] PCI: cadence: Add host driver for Cadence PCIe controller Cyrille Pitchen
2018-01-16 11:16 ` Kishon Vijay Abraham I
2018-01-16 15:09 ` Lorenzo Pieralisi
2018-01-18 23:13 ` Cyrille Pitchen
2018-01-16 16:07 ` Lorenzo Pieralisi
2018-01-18 23:23 ` Cyrille Pitchen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43b6ad03-dac6-0f46-9595-59bcfda65ad2@free-electrons.com \
--to=cyrille.pitchen@free-electrons.com \
--cc=adouglas@cadence.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dgary@cadence.com \
--cc=eandrews@cadence.com \
--cc=kgopi@cadence.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=nsekhar@ti.com \
--cc=robh@kernel.org \
--cc=stelford@cadence.com \
--cc=sureshp@cadence.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®