From: "Luis R. Rodriguez" <mcgrof@gmail.com>
To: "Gábor Stefanik" <netrolller.3d@gmail.com>
Cc: Broadcom Wireless <bcm43xx-dev@lists.berlios.de>,
linux-wireless <linux-wireless@vger.kernel.org>,
linux-kernel@vger.kernel.org
Subject: Re: [ANN] b43 LP-PHY support (BCM4310/4312/4315) now ready for testing!
Date: Tue, 18 Aug 2009 16:42:41 -0700 [thread overview]
Message-ID: <43e72e890908181642t1c11e4aah95b52e878b3e583e@mail.gmail.com> (raw)
In-Reply-To: <43e72e890908181641s2455e7f1me9b4d3bc277f197e@mail.gmail.com>
2009/8/18 Luis R. Rodriguez <mcgrof@gmail.com>:
> 2009/8/18 Gábor Stefanik <netrolller.3d@gmail.com>:
>> Hello World!
>>
>> Great news for Broadcom BCM4310/4312/4315 (PCI 14e4:4315) users:
>> LP-PHY support is now at the point where it can be tested for functionality!
>
> Hey great stuff :)
>
>> There are still problems with channel switching (a few patches ago,
>> only 802.11b/g channels 7 and 8 were working - no tests have been
>> performed since then) & TX is untested, but Larry has reported that he
>> can get scan results from channels 7 and 8. He doesn't have any AP on
>> these channels, so can't test if association works, but it should be
>> working too. It's also possible that recent patches have fixed the
>> channel switching bug, as the codepaths for channel switching have
>> been touched extensively, probably fixing a major miscalculation issue
>> ("Qdiv roundup" was completely wrong).
>>
>> So, go ahead, give it a try, and let's rock!
>>
>> Note that the code in wireless-testing is enough to start testing,
>> however it's recommended that you apply the following 2 pending fixes:
>> http://marc.info/?l=linux-wireless&m=125061590101156&w=2 and
>> http://marc.info/?l=linux-wireless&m=125062611720517&w=2
>>
>> Tomorrow's compat-wireless tarball, together with the above patches,
>> should also be good for testing. Not sure about today's tarball.
>
> Except CONFIG_B43_PHY_LP was not enabled on compat-wireless. But now
> it is. I kicked the cronjob and enabled CONFIG_B43_PHY_LP on
> config.mk, please report any issues.
>
> http://wireless.kernel.org/en/users/Download/
Oh and I forgot the release info:
Origin remote URL:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
git-describe for wireless-testing.git says: v2.6.31-rc6-31586-g80289f0
This is a bleeding edge compat-wireless release based on: master-2009-08-18
This is compat-release: master-2009-08-18
Luis
prev parent reply other threads:[~2009-08-18 23:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <69e28c910908181329r4b6b7cc8w3c9c0d79dda3730c@mail.gmail.com>
2009-08-18 23:41 ` Luis R. Rodriguez
2009-08-18 23:42 ` Luis R. Rodriguez [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43e72e890908181642t1c11e4aah95b52e878b3e583e@mail.gmail.com \
--to=mcgrof@gmail.com \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netrolller.3d@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®