From: "Christian König" <christian.koenig@amd.com>
To: Karl Mehltretter <kmehltretter@gmail.com>,
Gerd Hoffmann <kraxel@redhat.com>,
Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>,
Jason Gunthorpe <jgg@nvidia.com>,
dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org,
linaro-mm-sig@lists.linaro.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] udmabuf: respect the device's maximum segment size
Date: Tue, 29 Sep 2026 14:10:03 +0200 [thread overview]
Message-ID: <44427eff-9d95-42f5-8c67-55dfd319d562@amd.com> (raw)
In-Reply-To: <20260929054835.94118-1-kmehltretter@gmail.com>
On 9/29/26 07:48, Karl Mehltretter wrote:
> get_sg_table() merges physically contiguous pages without accounting
> for the mapping device's maximum segment size. This affects both
> importer mappings and the udmabuf misc device mapping used for CPU
> access.
>
> With DMA_API_DEBUG enabled, DMA_BUF_IOCTL_SYNC on a 64 MiB udmabuf
> reports:
>
> DMA-API: misc udmabuf: mapping sg segment longer than device claims to
> support [len=65884160] [max=65536]
>
> Use sg_alloc_table_from_pages_segment() with the mapping device's
> maximum segment size. Return -EINVAL if the limit is smaller than
> PAGE_SIZE because the page-based allocator cannot honor it.
>
> Before commit 5bf888673e0d ("udmabuf: Do not create malformed
> scatterlists"), each entry covered one page.
>
> Fixes: 5bf888673e0d ("udmabuf: Do not create malformed scatterlists")
> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
> Assisted-by: LLM
> Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
> ---
>
> Notes:
> Changes in v2:
> - Return -EINVAL when the maximum segment size reported by the device is
> smaller than PAGE_SIZE instead of clamping it. (Christian)
> - Add Jason Gunthorpe's Reviewed-by tag.
>
> Tested on v7.3-rc4-70-gfe2ec83746e5 in QEMU (x86_64, TCG) with
> DMA_API_DEBUG (all_errors=1) and DMABUF_DEBUG, A/B against the same
> base:
>
> before after
> DMA_BUF_IOCTL_SYNC, 64 MiB udmabuf 1 report 0
> vivid import, 4 MiB udmabuf 2 reports 0
> vivid import, 2 MiB hugetlb udmabuf 2 reports 0
> frames captured 5/5 5/5
>
> vb2-dma-contig rejected the non-contiguous import in both runs.
>
> For v2, a focused importer advertising PAGE_SIZE / 2 returned
> -EINVAL under KASAN and DMA_API_DEBUG. No warning, BUG, or DMA-API
> report was emitted.
>
> drivers/dma-buf/udmabuf.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
> index df6dd00462423..018937435356e 100644
> --- a/drivers/dma-buf/udmabuf.c
> +++ b/drivers/dma-buf/udmabuf.c
> @@ -133,15 +133,22 @@ static struct sg_table *get_sg_table(struct device *dev, struct dma_buf *buf,
> {
> struct udmabuf *ubuf = buf->priv;
> struct sg_table *sg;
> + unsigned int max_segment;
> int ret;
>
> + max_segment = dma_get_max_seg_size(dev);
> + /* The SG allocator requires a segment limit of at least PAGE_SIZE. */
> + if (max_segment < PAGE_SIZE)
> + return ERR_PTR(-EINVAL);
> +
> sg = kzalloc_obj(*sg);
> if (!sg)
> return ERR_PTR(-ENOMEM);
>
> - ret = sg_alloc_table_from_pages(sg, ubuf->pages, ubuf->pagecount, 0,
> - ubuf->pagecount << PAGE_SHIFT,
> - GFP_KERNEL);
> + ret = sg_alloc_table_from_pages_segment(sg, ubuf->pages, ubuf->pagecount,
> + 0, ubuf->pagecount << PAGE_SHIFT,
> + max_segment,
> + GFP_KERNEL);
> if (ret < 0)
> goto err_alloc;
>
>
> base-commit: fe2ec83746e501645709761605c2464a44fd2929
prev parent reply other threads:[~2026-09-29 12:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 5:48 Karl Mehltretter
[not found] ` <20260929060028.371041F00893@smtp.kernel.org>
2026-09-29 6:56 ` Karl Mehltretter
2026-09-29 12:03 ` Jason Gunthorpe
2026-09-29 19:53 ` [PATCH v2] udmabuf: respect the device's maximum segment sizeg Karl Mehltretter
2026-09-29 12:10 ` Christian König [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44427eff-9d95-42f5-8c67-55dfd319d562@amd.com \
--to=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jgg@nvidia.com \
--cc=kmehltretter@gmail.com \
--cc=kraxel@redhat.com \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=sumit.semwal@linaro.org \
--cc=vivek.kasireddy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®