Brown, Len wrote:

>>http://www.abclinuxu.cz/images/hosting/sr1200.pdf
>>    
>>
>
>An Intel SCB2, a Dual P3/Serverworks board....
>Run it in the default IOAPIC mode and ignore the warnings.
>No, upgrading the kernel will almost certainly not make
>any difference.
>My note about running with "noapic" was mis-guided --
>I didn't realize this was an SMP server board
>
>Curious, however that you can't boot in IOAPIC mode with acpi=off.
>I thought that in that era they still had MPS support.  You might
>take a peek at the BIOS setup options.  dmesg will also mention
>MPS if it is there.  However, even if you succeeded in booting
>in acpi=off MPS IOAPIC mode, I would not expect it to have an
>effect on the warnings you see.
>
>cheers,
>-Len
>
>  
>
Thanks Len.

I cannot boot with 'noapic' ( as you mentioned ), with 'acpi=off' its ok.

btw... dmesg output in attachement.

Vladimir