dmesg
Linux version 2.6.16.18 (indrek@xxx) (gcc version 4.0.3 (Debian 4.0.3-1)) #10 Fri May 26 09:38:37 EEST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000ebe9000 (usable)
 BIOS-e820: 000000000ebe9000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
235MB LOWMEM available.
On node 0 totalpages: 60393
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 56297 pages, LIFO batch:15
  HighMem zone: 0 pages, LIFO batch:0
DMI not present or invalid.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
Built 1 zonelists
Kernel command line: rootdelay=10 console=ttyS0,115200 root=/dev/sda2 ro
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 206.246 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235684k/241572k available (2268k kernel code, 5396k reserved, 642k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 399.68 BogoMIPS (lpj=799374)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0088a93d c0c0a13d 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0088a93d c0c0a13d 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: After all inits, caps: 0088a93d c0c0a13d 00000000 00000000 00000000 00000000 00000000
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:01.1
PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.1
audit: initializing netlink socket (disabled)
audit(1136076171.500:1): initialized
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
Real Time Clock Driver v1.12ac
cs5535_gpio: base=0xf000 mask=0xb003c66 major=254
[drm] Initialized drm 1.0.1 20051102
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbmon: debugfs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Setting latency timer of device 0000:00:0f.4 to 64
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.4: irq 5, io mem 0xe1015000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
/home/indrek/src/linux-2.6.16.18/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
ip_conntrack version 2.4 (1887 buckets, 15096 max) - 172 bytes per conntrack
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Waiting 10sec before mounting root device...
atkbd.c: Failed to enable keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard as /class/input/input0
  Vendor: SAMSUNG   Model: SP0812N           Rev: 0811
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
usb-storage: device scan complete
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 172k freed
EXT3 FS on sda2, internal journal
hw_random hardware driver 1.0.0 loaded
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xf800, 00:e0:4c:77:11:a3, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
AMD5536: neither IDE port enabled (BIOS)
PCI: Setting latency timer of device 0000:00:0f.3 to 64
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
dbe61:~#