From: "Bowman, Terry" <terry.bowman@amd.com>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: dave@stgolabs.net, dave.jiang@intel.com,
alison.schofield@intel.com, dan.j.williams@intel.com,
bhelgaas@google.com, shiju.jose@huawei.com, ming.li@zohomail.com,
Smita.KoralahalliChannabasappa@amd.com, rrichter@amd.com,
dan.carpenter@linaro.org, PradeepVineshReddy.Kodamati@amd.com,
lukas@wunner.de, Benjamin.Cheatham@amd.com,
sathyanarayanan.kuppuswamy@linux.intel.com,
linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: Re: [PATCH v10 07/17] CXL/PCI: Introduce CXL uncorrectable protocol error recovery
Date: Wed, 2 Jul 2025 16:06:53 -0500 [thread overview]
Message-ID: <447e3e84-af3b-415b-8f01-f3c60fe31ce3@amd.com> (raw)
In-Reply-To: <20250627120541.00003a14@huawei.com>
On 6/27/2025 6:05 AM, Jonathan Cameron wrote:
> On Thu, 26 Jun 2025 17:42:42 -0500
> Terry Bowman <terry.bowman@amd.com> wrote:
>
>> Create cxl_do_recovery() to provide uncorrectable protocol error (UCE)
>> handling. Follow similar design as found in PCIe error driver,
>> pcie_do_recovery(). One difference is cxl_do_recovery() will treat all UCEs
>> as fatal with a kernel panic. This is to prevent corruption on CXL memory.
>>
>> Export the PCI error driver's merge_result() to CXL namespace.
> I think this may be a confusion from earlier review. Anyhow, it should
> be namespaced in the sense of not exporting something the vague name of
> merge_result but it's PCI code, not CXL code and we don't have the dangerous
> interface argument to justify putting it in the CXL namespace so I think
> a namespaced EXPORT makes little sense for this one.
>
> Jonathan
>
>
>> Introduce
>> PCI_ERS_RESULT_PANIC and add support in merge_result() routine. This will
>> be used by CXL to panic the system in the case of uncorrectable protocol
>> errors. PCI error handling is not currently expected to use the
>> PCI_ERS_RESULT_PANIC.
>>
>> Copy pci_walk_bridge() to cxl_walk_bridge(). Make a change to walk the
>> first device in all cases.
>>
>> Copy the PCI error driver's report_error_detected() to cxl_report_error_detected().
>> Note, only CXL Endpoints and RCH Downstream Ports(RCH DSP) are currently
>> supported. Add locking for PCI device as done in PCI's report_error_detected().
>> This is necessary to prevent the RAS registers from disappearing before
>> logging is completed.
>>
>> Call panic() to halt the system in the case of uncorrectable errors (UCE)
>> in cxl_do_recovery(). Export pci_aer_clear_fatal_status() for CXL to use
>> if a UCE is not found. In this case the AER status must be cleared and
>> uses pci_aer_clear_fatal_status().
>>
>> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
>
>> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>> index de6381c690f5..63fceb3e8613 100644
>> --- a/drivers/pci/pcie/err.c
>> +++ b/drivers/pci/pcie/err.c
>> @@ -21,9 +21,12 @@
>> #include "portdrv.h"
>> #include "../pci.h"
>>
>> -static pci_ers_result_t merge_result(enum pci_ers_result orig,
>> - enum pci_ers_result new)
>> +pci_ers_result_t merge_result(enum pci_ers_result orig,
>> + enum pci_ers_result new)
>> {
>> + if (new == PCI_ERS_RESULT_PANIC)
>> + return PCI_ERS_RESULT_PANIC;
>> +
>> if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
>> return PCI_ERS_RESULT_NO_AER_DRIVER;
>>
>> @@ -45,6 +48,7 @@ static pci_ers_result_t merge_result(enum pci_ers_result orig,
>>
>> return orig;
>> }
>> +EXPORT_SYMBOL_NS_GPL(merge_result, "CXL");
> Do we care about namespacing this? I think not given it is PCIe code
> and hardly destructive for other drivers to mess with it if they like.
>
> I would namespace it in the sense of renaming it to make it clear
> it's about pci errors though.
>
> pci_ers_merge_result() perhaps?
>
> Do that as a percursor patch.
>
Good idea. There is a lot of changes related to just exporting this and changing
the name. I've changed the namespace export to be:
EXPORT_SYMBOL(pci_ers_merge_result);
I moved this and its related required changes into an earlier patch.
-Terry
>>
>> static int report_error_detected(struct pci_dev *dev,
>> pci_channel_state_t state,
next prev parent reply other threads:[~2025-07-02 21:06 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-26 22:42 [PATCH v10 00/17] Enable CXL PCIe Port Protocol Error handling and logging Terry Bowman
2025-06-26 22:42 ` [PATCH v10 01/17] cxl/pci: Remove unnecessary CXL Endpoint handling helper functions Terry Bowman
2025-07-18 17:55 ` Dave Jiang
2025-07-23 21:58 ` dan.j.williams
2025-07-23 22:15 ` Dave Jiang
2025-06-26 22:42 ` [PATCH v10 02/17] PCI/CXL: Add pcie_is_cxl() Terry Bowman
2025-07-23 22:30 ` dan.j.williams
2025-08-09 10:56 ` Alejandro Lucero Palau
2025-08-11 19:14 ` Bowman, Terry
2025-08-11 23:14 ` dan.j.williams
2025-06-26 22:42 ` [PATCH v10 03/17] PCI/AER: Report CXL or PCIe bus error type in trace logging Terry Bowman
2025-06-26 23:25 ` Sathyanarayanan Kuppuswamy
2025-06-27 9:53 ` Jonathan Cameron
2025-07-02 16:00 ` Bowman, Terry
2025-06-27 11:32 ` Shiju Jose
2025-07-01 21:27 ` Dave Jiang
2025-07-23 22:56 ` dan.j.williams
2025-06-26 22:42 ` [PATCH v10 04/17] CXL/AER: Introduce CXL specific AER driver file Terry Bowman
2025-06-26 23:42 ` Sathyanarayanan Kuppuswamy
2025-06-27 10:12 ` Jonathan Cameron
2025-06-27 14:29 ` Bowman, Terry
2025-07-24 0:01 ` dan.j.williams
2025-07-24 17:06 ` Bowman, Terry
2025-07-24 20:32 ` dan.j.williams
2025-07-24 1:16 ` dan.j.williams
2025-07-24 17:02 ` Bowman, Terry
2025-07-24 20:23 ` dan.j.williams
2025-06-26 22:42 ` [PATCH v10 05/17] CXL/AER: Introduce kfifo for forwarding CXL errors Terry Bowman
2025-06-27 10:24 ` Jonathan Cameron
2025-07-02 16:21 ` Bowman, Terry
2025-07-02 19:54 ` Dan Carpenter
2025-07-02 19:57 ` Bowman, Terry
2025-07-03 10:06 ` Jonathan Cameron
2025-07-01 21:53 ` Dave Jiang
2025-07-02 17:10 ` Bowman, Terry
2025-07-24 2:01 ` dan.j.williams
2025-07-24 17:21 ` Bowman, Terry
2025-07-24 20:55 ` dan.j.williams
2025-06-26 22:42 ` [PATCH v10 06/17] PCI/AER: Dequeue forwarded CXL error Terry Bowman
2025-06-27 11:00 ` Jonathan Cameron
2025-07-02 17:51 ` Bowman, Terry
2025-07-01 23:04 ` Dave Jiang
2025-07-02 17:56 ` Bowman, Terry
2025-07-03 10:11 ` Jonathan Cameron
2025-07-25 0:38 ` dan.j.williams
2025-06-26 22:42 ` [PATCH v10 07/17] CXL/PCI: Introduce CXL uncorrectable protocol error recovery Terry Bowman
2025-06-27 11:05 ` Jonathan Cameron
2025-07-02 21:06 ` Bowman, Terry [this message]
2025-06-27 12:27 ` Shiju Jose
2025-07-02 21:34 ` Bowman, Terry
2025-06-26 22:42 ` [PATCH v10 08/17] cxl/pci: Move RAS initialization to cxl_port driver Terry Bowman
2025-06-27 11:12 ` Jonathan Cameron
2025-07-18 18:01 ` Dave Jiang
2025-06-26 22:42 ` [PATCH v10 09/17] cxl/pci: Map CXL Endpoint Port and CXL Switch Port RAS registers Terry Bowman
2025-06-27 11:17 ` Jonathan Cameron
2025-07-02 21:41 ` Bowman, Terry
2025-07-18 21:28 ` Dave Jiang
2025-07-18 21:55 ` Bowman, Terry
2025-07-18 22:01 ` Dave Jiang
2025-07-18 22:40 ` Bowman, Terry
2025-07-18 22:45 ` Dave Jiang
2025-06-26 22:42 ` [PATCH v10 10/17] cxl/pci: Update RAS handler interfaces to also support CXL Ports Terry Bowman
2025-06-26 22:42 ` [PATCH v10 11/17] cxl/pci: Log message if RAS registers are unmapped Terry Bowman
2025-07-21 21:56 ` Dave Jiang
2025-06-26 22:42 ` [PATCH v10 12/17] cxl/pci: Unify CXL trace logging for CXL Endpoints and CXL Ports Terry Bowman
2025-06-27 12:22 ` Shiju Jose
2025-07-02 1:18 ` Alison Schofield
2025-07-02 22:07 ` Bowman, Terry
2025-07-02 21:56 ` Bowman, Terry
2025-06-26 22:42 ` [PATCH v10 13/17] cxl/pci: Update cxl_handle_cor_ras() to return early if no RAS errors Terry Bowman
2025-06-27 11:48 ` Jonathan Cameron
2025-07-21 22:17 ` Dave Jiang
2025-06-26 22:42 ` [PATCH v10 14/17] cxl/pci: Introduce CXL Endpoint protocol error handlers Terry Bowman
2025-06-27 11:52 ` Jonathan Cameron
2025-06-27 12:27 ` Shiju Jose
2025-07-21 22:35 ` Dave Jiang
2025-07-22 18:23 ` Bowman, Terry
2025-06-26 22:42 ` [PATCH v10 15/17] CXL/PCI: Introduce CXL Port " Terry Bowman
2025-06-26 22:42 ` [PATCH v10 16/17] CXL/PCI: Enable CXL protocol errors during CXL Port probe Terry Bowman
2025-06-26 22:42 ` [PATCH v10 17/17] CXL/PCI: Disable CXL protocol error interrupts during CXL Port cleanup Terry Bowman
2025-07-23 21:55 ` [PATCH v10 00/17] Enable CXL PCIe Port Protocol Error handling and logging dan.j.williams
2025-08-18 15:18 ` Joshua Hahn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=447e3e84-af3b-415b-8f01-f3c60fe31ce3@amd.com \
--to=terry.bowman@amd.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.carpenter@linaro.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=ming.li@zohomail.com \
--cc=rrichter@amd.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=shiju.jose@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®