From: Reuben Farrelly <reuben-lkml@reub.net>
To: Neil Brown <neilb@suse.de>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>
Subject: Re: Weird RAID/SATA problem [ once was Re: 2.6.17-mm3 ]
Date: Sun, 02 Jul 2006 12:03:40 +1200 [thread overview]
Message-ID: <44A70D5C.6020700@reub.net> (raw)
In-Reply-To: <17574.30829.397932.205727@cse.unsw.edu.au>
On 2/07/2006 1:28 a.m., Neil Brown wrote:
> On Sunday July 2, reuben-lkml@reub.net wrote:
>> BUG: warning at drivers/md/md.c:411/super_written_barrier()
>>
>> Call Trace:
>> <IRQ> [<ffffffff80422231>] super_written_barrier+0x61/0x100
>> [<ffffffff8023c000>] bio_endio+0x5a/0x6a
>> [<ffffffff8022e24f>] __end_that_request_first+0x16f/0x4c9
>> [<ffffffff8024afaa>] end_that_request_first+0xc/0xe
>> [<ffffffff8034e825>] blk_ordered_complete_seq+0x7d/0x8c
>> [<ffffffff8034e864>] post_flush_end_io+0x30/0x35
>> [<ffffffff8034e748>] end_that_request_last+0xd8/0xf4
>> [<ffffffff803d83a1>] scsi_end_request+0xb1/0xdd
>> [<ffffffff803d87cd>] scsi_io_completion+0x3cd/0x3dc
>
> I think the key decision to return an error is happening here in
> scsi_io_completion.
> Pooring over a disassembly might help show here, but sticking in a
> bunch of printks is probably easier (for someone like me who has never
> seen this code before anyway :-)
>
> What does this patch produce?
>
> NeilBrown
>
> Signed-off-by: Neil Brown <neilb@suse.de>
>
>
> diff .prev/drivers/scsi/scsi_lib.c ./drivers/scsi/scsi_lib.c
> --- .prev/drivers/scsi/scsi_lib.c 2006-07-01 23:22:46.000000000 +1000
> +++ ./drivers/scsi/scsi_lib.c 2006-07-01 23:26:18.000000000 +1000
> @@ -952,6 +952,7 @@ void scsi_io_completion(struct scsi_cmnd
Loading ide-disk.ko module
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda10
md: sda10 has invalid sb, not importing!
md: invalid raid superblock magic on sdc10
md: sdc10 has invalid sb, not importing!
md: autorun ...
md: considering sdc11 ...
md: adding sdc11 ...
md: sdc7 has different UUID to sdc11
md: sdc6 has different UUID to sdc11
md: sdc5 has different UUID to sdc11
md: sdc3 has different UUID to sdc11
md: sdc2 has different UUID to sdc11
md: adding sda11 ...
md: sda7 has different UUID to sdc11
md: sda6 has different UUID to sdc11
md: sda5 has different UUID to sdc11
md: sda3 has different UUID to sdc11
md: sda2 has different UUID to sdc11
md: created md5
md: bind<sda11>
md: bind<sdc11>
md: running: <sdc11><sda11>
raid1: raid set md5 active with 2 out of 2 mirrors
md5: bitmap initialized from disk: read 10/10 pages, set 1 bits, status: 0
created bitmap (153 pages) for device md5
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda11, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: considering sdc7 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda11
disk 1, wo:0, o:1, dev:sdc11
md: adding sdc7 ...
md: sdc6 has different UUID to sdc7
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc11
md: sdc5 has different UUID to sdc7
md: sdc3 has different UUID to sdc7
md: sdc2 has different UUID to sdc7
md: adding sda7 ...
md: sda6 has different UUID to sdc7
md: sda5 has different UUID to sdc7
md: sda3 has different UUID to sdc7
md: sda2 has different UUID to sdc7
md: created md4
md: bind<sda7>
md: bind<sdc7>
md: running: <sdc7><sda7>
raid1: raid set md4 active with 2 out of 2 mirrors
md4: bitmap initialized from disk: read 4/4 pages, set 2 bits, status: 0
created bitmap (61 pages) for device md4
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda7, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: considering sdc6 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda7
disk 1, wo:0, o:1, dev:sdc7
md: adding sdc6 ...
md: sdc5 has different UUID to sdc6
md: sdc3 has different UUID to sdc6
md: sdc2 has different UUID to sdc6
md: adding sda6 ...
md: sda5 has different UUID to sdc6
md: sda3 has different UUID to sdc6
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc7
md: sda2 has different UUID to sdc6
md: created md3
md: bind<sda6>
md: bind<sdc6>
md: running: <sdc6><sda6>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: bitmap initialized from disk: read 1/1 pages, set 1 bits, status: 0
created bitmap (13 pages) for device md3
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 143 248 1 0
raid1: Disk failure on sdc6, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
md: considering sdc5 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda6
disk 1, wo:1, o:0, dev:sdc6
md: adding sdc5 ...
md: sdc3 has different UUID to sdc5
md: sdc2 has different UUID to sdc5
md: adding sda5 ...
md: sda3 has different UUID to sdc5
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda6
md: sda2 has different UUID to sdc5
md: created md2
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: bitmap initialized from disk: read 10/10 pages, set 16 bits, status: 0
created bitmap (150 pages) for device md2
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda5, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: considering sdc3 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda5
disk 1, wo:0, o:1, dev:sdc5
md: adding sdc3 ...
md: sdc2 has different UUID to sdc3
md: adding sda3 ...
md: sda2 has different UUID to sdc3
md: created md1
md: bind<sda3>
md: bind<sdc3>
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc5
md: running: <sdc3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: bitmap initialized from disk: read 10/10 pages, set 2 bits, status: 0
created bitmap (150 pages) for device md1
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 143 248 1 0
raid1: Disk failure on sdc3, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
md: considering sdc2 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda3
disk 1, wo:1, o:0, dev:sdc3
md: adding sdc2 ...
md: adding sda2 ...
md: created md0
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda3
md: bind<sda2>
md: bind<sdc2>
md: running: <sdc2><sda2>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: bitmap initialized from disk: read 12/12 pages, set 100 bits, status: 0
created bitmap (187 pages) for device md0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda2, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: ... autorun DONE.
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda2
disk 1, wo:0, o:1, dev:sdc2
Creating root device.
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc2
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /proc/bus/usb
ERROR unmounting old /proc/bus/usb: No such file or directory
forcing unmount of /proc/bus/usb
unmounting old /sys
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1151798137.896:2): selinux=0 auid=4294967295
INIT: version 2.86 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Setting clock (utc): Sun Jul 2 11:55:41 NZST 2006 [ OK ]
Starting udev: [ OK ]
Setting hostname tornado.reub.net: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 50/6024 files, 23798/24064 blocks (check in 3 mounts)
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local swap partitions: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
sh-3.1#
sh-3.1#
sh-3.1# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdc3[2](F) sda3[0]
4891712 blocks [2/1] [U_]
bitmap: 1/150 pages [4KB], 16KB chunk
md2 : active raid1 sdc5[1] sda5[2](F)
4891648 blocks [2/1] [_U]
bitmap: 7/150 pages [28KB], 16KB chunk
md3 : active raid1 sdc6[2](F) sda6[0]
104320 blocks [2/1] [U_]
bitmap: 1/13 pages [4KB], 4KB chunk
md4 : active raid1 sdc7[1] sda7[2](F)
497856 blocks [2/1] [_U]
bitmap: 4/61 pages [16KB], 4KB chunk
md5 : active raid1 sdc11[1] sda11[2](F)
20008832 blocks [2/1] [_U]
bitmap: 1/153 pages [4KB], 64KB chunk
md0 : active raid1 sdc2[1] sda2[2](F)
24410688 blocks [2/1] [_U]
bitmap: 6/187 pages [24KB], 64KB chunk
unused devices: <none>
sh-3.1#
sh-3.1# mdadm --add /dev/md5 /dev/sda11
mdadm: Cannot open /dev/sda11: Device or resource busy
sh-3.1# mdadm --add /dev/md5 /dev/sdc11
mdadm: Cannot open /dev/sdc11: Device or resource busy
sh-3.1#
sh-3.1#
sh-3.1# mdadm --add /dev/md4 /dev/sda7
mdadm: Cannot open /dev/sda7: Device or resource busy
sh-3.1#
sh-3.1#
sh-3.1# mdadm --add /dev/md0 /dev/sda2
mdadm: Cannot open /dev/sda2: Device or resource busy
sh-3.1#
reuben
prev parent reply other threads:[~2006-07-02 0:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060630105401.2dc1d3f3.akpm@osdl.org>
[not found] ` <44A5C1D5.20200@reub.net>
[not found] ` <17573.50871.307879.557218@cse.unsw.edu.au>
[not found] ` <44A5D079.6070505@reub.net>
[not found] ` <17573.55937.866300.638738@cse.unsw.edu.au>
[not found] ` <44A6390E.1030608@reub.net>
[not found] ` <17574.15295.828980.278323@cse.unsw.edu.au>
[not found] ` <44A64BD8.90906@reub.net>
2006-07-01 10:51 ` Neil Brown
2006-07-01 11:38 ` Reuben Farrelly
2006-07-01 12:05 ` Neil Brown
2006-07-01 12:24 ` Reuben Farrelly
2006-07-01 13:28 ` Neil Brown
2006-07-02 0:03 ` Reuben Farrelly [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44A70D5C.6020700@reub.net \
--to=reuben-lkml@reub.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®