From: Eric Sandeen <esandeen@redhat.com>
To: ext2-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: [PATCH] fix ext3 mounts at 16T
Date: Fri, 11 Aug 2006 17:13:14 -0500 [thread overview]
Message-ID: <44DD00FA.5060600@redhat.com> (raw)
I figure before we get too fired up about 48 bits and ext4 let's fix 32 bits on ext3 :)
I need to do some actual IO testing now, but this gets things mounting for a 16T ext3 filesystem.
(patched up e2fsprogs is needed too, I'll send that off the kernel list)
This patch fixes these issues in the kernel:
o sbi->s_groups_count overflows in ext3_fill_super()
sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
le32_to_cpu(es->s_first_data_block) +
EXT3_BLOCKS_PER_GROUP(sb) - 1) /
EXT3_BLOCKS_PER_GROUP(sb);
at 16T, s_blocks_count is already maxed out; adding EXT3_BLOCKS_PER_GROUP(sb) overflows it and
groups_count comes out to 0. Not really what we want, and causes a failed mount.
Feel free to check my math (actually, please do!), but changing it this way should work &
avoid the overflow:
(A + B - 1)/B changed to: ((A - 1)/B) + 1
o ext3_check_descriptors() overflows range checks
ext3_check_descriptors() iterates over all block groups making sure that various bits are
within the right block ranges... on the last pass through, it is checking the error case
[item] >= block + EXT3_BLOCKS_PER_GROUP(sb)
where "block" is the first block in the last block group. The last block in this group
(and the last one that will fit in 32 bits) is block + EXT3_BLOCKS_PER_GROUP(sb)- 1.
block + EXT3_BLOCKS_PER_GROUP(sb) wraps back around to 0.
so, make things clearer with "first_block" and "last_block" where those are first and last,
inclusive, and use <, > rather than <, >=.
Finally, the last block group may be smaller than the rest, so account for this on the last
pass through: last_block = sb->s_blocks_count - 1;
(a similar patch could be done for ext2; does anyone in their right mind use ext2 at 16T?
I'll send an ext2 patch doing the same thing if that's warranted)
Thanks,
-Eric
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Index: linux-2.6-xfs/fs/ext3/super.c
===================================================================
--- linux-2.6-xfs.orig/fs/ext3/super.c
+++ linux-2.6-xfs/fs/ext3/super.c
@@ -1132,7 +1132,8 @@ static int ext3_setup_super(struct super
static int ext3_check_descriptors (struct super_block * sb)
{
struct ext3_sb_info *sbi = EXT3_SB(sb);
- ext3_fsblk_t block = le32_to_cpu(sbi->s_es->s_first_data_block);
+ ext3_fsblk_t first_block = le32_to_cpu(sbi->s_es->s_first_data_block);
+ ext3_fsblk_t last_block;
struct ext3_group_desc * gdp = NULL;
int desc_block = 0;
int i;
@@ -1141,12 +1142,16 @@ static int ext3_check_descriptors (struc
for (i = 0; i < sbi->s_groups_count; i++)
{
+ if (i == sbi->s_groups_count - 1)
+ last_block = sb->s_blocks_count - 1;
+ else
+ last = first + (EXT3_BLOCKS_PER_GROUP(sb) - 1);
+
if ((i % EXT3_DESC_PER_BLOCK(sb)) == 0)
gdp = (struct ext3_group_desc *)
sbi->s_group_desc[desc_block++]->b_data;
- if (le32_to_cpu(gdp->bg_block_bitmap) < block ||
- le32_to_cpu(gdp->bg_block_bitmap) >=
- block + EXT3_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_block_bitmap) < first_block ||
+ le32_to_cpu(gdp->bg_block_bitmap) > last_block)
{
ext3_error (sb, "ext3_check_descriptors",
"Block bitmap for group %d"
@@ -1155,9 +1160,8 @@ static int ext3_check_descriptors (struc
le32_to_cpu(gdp->bg_block_bitmap));
return 0;
}
- if (le32_to_cpu(gdp->bg_inode_bitmap) < block ||
- le32_to_cpu(gdp->bg_inode_bitmap) >=
- block + EXT3_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block ||
+ le32_to_cpu(gdp->bg_inode_bitmap) > last_block)
{
ext3_error (sb, "ext3_check_descriptors",
"Inode bitmap for group %d"
@@ -1166,9 +1170,9 @@ static int ext3_check_descriptors (struc
le32_to_cpu(gdp->bg_inode_bitmap));
return 0;
}
- if (le32_to_cpu(gdp->bg_inode_table) < block ||
- le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >=
- block + EXT3_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_inode_table) < first_block ||
+ le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >
+ last_block)
{
ext3_error (sb, "ext3_check_descriptors",
"Inode table for group %d"
@@ -1177,7 +1181,7 @@ static int ext3_check_descriptors (struc
le32_to_cpu(gdp->bg_inode_table));
return 0;
}
- block += EXT3_BLOCKS_PER_GROUP(sb);
+ first_block += EXT3_BLOCKS_PER_GROUP(sb);
gdp++;
}
@@ -1580,10 +1584,9 @@ static int ext3_fill_super (struct super
if (EXT3_BLOCKS_PER_GROUP(sb) == 0)
goto cantfind_ext3;
- sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
- le32_to_cpu(es->s_first_data_block) +
- EXT3_BLOCKS_PER_GROUP(sb) - 1) /
- EXT3_BLOCKS_PER_GROUP(sb);
+ sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
+ le32_to_cpu(es->s_first_data_block) - 1)
+ / EXT3_BLOCKS_PER_GROUP(sb)) + 1;
db_count = (sbi->s_groups_count + EXT3_DESC_PER_BLOCK(sb) - 1) /
EXT3_DESC_PER_BLOCK(sb);
sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
next reply other threads:[~2006-08-11 22:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-11 22:13 Eric Sandeen [this message]
2006-08-11 22:29 ` [Ext2-devel] " Mingming Cao
2006-08-18 8:50 ` Andreas Dilger
2006-08-14 19:54 ` [UPDATED PATCH] " Eric Sandeen
2006-08-14 22:58 ` [PATCH] " Andrew Morton
2006-08-14 23:02 ` [Ext2-devel] " Eric Sandeen
2006-08-15 17:28 ` [PATCH] fix ext2 " Eric Sandeen
2006-08-16 11:45 ` [Ext2-devel] [PATCH] fix ext3 " Johann Lombardi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44DD00FA.5060600@redhat.com \
--to=esandeen@redhat.com \
--cc=ext2-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome