On 8/31/23 16:27, Florian Fainelli wrote: > On 8/30/23 15:47, Doug Berger wrote: >> Some devices (e.g. BCM72112) use an alarm_irq interrupt that is >> connected to a level interrupt controller rather than an edge >> interrupt controller. In this case, the interrupt cannot be left >> enabled by the irq handler while preserving the hardware wake-up >> signal on wake capable devices or an interrupt storm will occur. >> >> The alarm_expired flag is introduced to allow the disabling of >> the interrupt when an alarm expires and to support balancing the >> calls to disable_irq() and enable_irq() in accordance with the >> existing design. >> >> Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake >> alarm") >> Signed-off-by: Doug Berger > > Reviewed-by: Florian Fainelli Alexandre, any chance you could apply this patch? Thanks! -- Florian