mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Fabian Vogt <fabian@ritter-vogt.de>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	SungHwan Jung <onenowy@gmail.com>
Subject: [PATCH] ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
Date: Thu, 24 Aug 2023 17:57:50 +0200	[thread overview]
Message-ID: <4504056.LvFx2qVVIh@fabians-envy> (raw)

The LED for the mic mute button is controlled by GPIO2.
The mute button LED is slightly more complex, it's controlled by two bits
in coeff 0x0b. Add a fixup for the mute LED and chain to an existing fixup
for the mic mute LED.

Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
---
Applies on top of 89bf6209cad6.

I see that SungHwan Jung (CC'd) recently submitted the same fixup for
a rather similar but different model as
"ALSA: hda/realtek: Add quirk for HP Victus 16-d1xxx to enable mute LED"
Does your HP Victus also need the ALC245_FIXUP_HP_GPIO_LED? Then we could
combine the quirks.

 sound/pci/hda/patch_realtek.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index dc7b7a407638..cac207d7c0b9 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4639,6 +4639,24 @@ static void alc236_fixup_hp_mute_led_coefbit2(struct hda_codec *codec,
 	}
 }
 
+/* The mute LED is controlled by two bits in coef 0x0b:
+ * To turn on, set bit 3 but clear bit 2.
+ */
+static void alc245_fixup_hp_x360_mute_led(struct hda_codec *codec,
+				      const struct hda_fixup *fix, int action)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+		spec->mute_led_polarity = 0;
+		spec->mute_led_coef.idx = 0x0b;
+		spec->mute_led_coef.mask = 0xc;
+		spec->mute_led_coef.on = 0x8;
+		spec->mute_led_coef.off = 0x4;
+		snd_hda_gen_add_mute_led_cdev(codec, coef_mute_led_set);
+	}
+}
+
 /* turn on/off mic-mute LED per capture hook by coef bit */
 static int coef_micmute_led_set(struct led_classdev *led_cdev,
 				enum led_brightness brightness)
@@ -7231,6 +7249,7 @@ enum {
 	ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS,
 	ALC236_FIXUP_DELL_DUAL_CODECS,
 	ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI,
+	ALC245_FIXUP_HP_X360_MUTE_LED,
 };
 
 /* A special fixup for Lenovo C940 and Yoga Duet 7;
@@ -9309,6 +9328,12 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC269_FIXUP_THINKPAD_ACPI,
 	},
+	[ALC245_FIXUP_HP_X360_MUTE_LED] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc245_fixup_hp_x360_mute_led,
+		.chained = true,
+		.chain_id = ALC245_FIXUP_HP_GPIO_LED
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -9551,6 +9576,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8870, "HP ZBook Fury 15.6 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x8873, "HP ZBook Studio 15.6 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x887a, "HP Laptop 15s-eq2xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
+	SND_PCI_QUIRK(0x103c, 0x888a, "HP ENVY x360 Convertible 15-eu0xxx", ALC245_FIXUP_HP_X360_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x888d, "HP ZBook Power 15.6 inch G8 Mobile Workstation PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8895, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED),
-- 
2.41.0





             reply	other threads:[~2023-08-24 15:59 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-24 15:57 Fabian Vogt [this message]
2023-08-24 17:37 ` SungHwan Jung
2023-08-24 17:44   ` Takashi Iwai
2023-08-24 18:39     ` [PATCH v2] " Fabian Vogt
2023-08-25  7:49       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4504056.LvFx2qVVIh@fabians-envy \
    --to=fabian@ritter-vogt.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=onenowy@gmail.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®