Re: [Bugme-new] [Bug 5003] New: Problem with symbios driver on recent -mm trees

["Martin J. Bligh" <mbligh@mbligh.org>]

> On Fri, 2005-08-05 at 07:36 -0700, Martin J. Bligh wrote:
>> Howcome it works on all mainline kernels, and not -mm then? ;-)
>> Did we fix an error path to detect failures, maybe?
> 
> Well, OK, it might be something to do with your drives trying to
> negotiate IU and QAS.  Support for this was added to the sym2 driver but
> never verified (because no-one seemed to have drives that could do it).
> 
> The attached should stop the driver from negotiating these two
> parameters, if you could try it (it will produce complaints about static
> functions defined but not used, but you can ignore them).

Nope, is the same as before with this patch ....

M.
 
> James
> 
> diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
> --- a/drivers/scsi/sym53c8xx_2/sym_glue.c
> +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
> @@ -2122,10 +2122,12 @@ static struct spi_function_template sym2
>  	.show_width	= 1,
>  	.set_dt		= sym2_set_dt,
>  	.show_dt	= 1,
> +#if 0
>  	.set_iu		= sym2_set_iu,
>  	.show_iu	= 1,
>  	.set_qas	= sym2_set_qas,
>  	.show_qas	= 1,
> +#endif
>  	.get_signalling	= sym2_get_signalling,
>  };
>  
> 
> 
> 
>