Pavel Machek wrote:
> Hi!
> 
>> After updating from 2.6.17.13 to 2.6.18 (using `make oldconfig`),
>> suspend no longer suspends my laptop (Dell Inspiron 5100).
>>
>> # s2ram -f
>> Switching from vt7 to vt1
>> s2ram_do: Invalid argument
>> switching back to vt7
>>
>> The screen blanks, but then comes back up after a few seconds. This
>> happens both with and without X running.
>>
>> I've attached the output of `lspci -vvv` and my
>> /usr/src/linux-2.6.18/.config for more information. Please let me know
>> if there are any patches to try or if more information is required.
> 
> Relevant part of dmesg after failed attempt is neccessary... and you
> can probably read it yourself and figure what is wrong. I'd guess some
> device just failed to suspend... rmmod it.

(This is now with 2.6.18.1)

Stopping tasks: =====================================================|
ACPI: PCI interrupt for device 0000:02:04.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Class driver suspend failed for cpu0
Could not power down device firmware: error -22
Some devices failed to power down

I've attached my entire dmesg as well.

-sandalle

-- 
Eric Sandall                     |  Source Mage GNU/Linux Developer
eric@sandall.us                  |  http://www.sourcemage.org/
http://eric.sandall.us/          |  SysAdmin @ Shock Physics @ WSU
http://counter.li.org/  #196285  |  http://www.shock.wsu.edu/