Re: [PATCH net-next v2 2/3] selftests: drv-net: pause: Validate the pause autonegotiation with a partner

[Andrew Lunn <andrew@lunn.ch>]

> > Firmware-managed NICs such as ice also keep the link on close by default.
> > In drivers/net/ethernet/intel/ice/ice_main.c, the PHY is only taken down
> > on close when ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA is set:
> > 
> > 	if (test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, vsi->back->flags)) {
> > 		int link_err = ice_phy_cfg(vsi, false);
> > 
> > On this kind of hardware, a directly connected peer would be cached as
> > cfg.lp_controllable = False. pause_aneg_resolution(), and the four later
> > tests in the series, would then skip with "is not directly connected".
> > That message points at cabling, when the real cause is that the PHY
> > stayed powered.
> > 
> > The new remote lp_advertising checks in pause_advertising_test() would
> > also be skipped without any notice.
> 
> Not much we can do if the peer doesn't behave as expected here. Not sure this
> requires attention.

I sounds like anything with a BMC is going to hit this. So i doubt you
will see it with your stmmac boards. Maybe sometime in the future we
can query the NIC to see if it supports NCSI and change the test
behaviour to fit?

	Andrew