From: Sibi Sankar <sibis@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Ohad Ben-Cohen <ohad@wizery.com>,
Arun Kumar Neelakantam <aneela@codeaurora.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: Re: [PATCH v5 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes
Date: Fri, 1 Feb 2019 11:19:51 +0530 [thread overview]
Message-ID: <4539b3ca-cace-9c71-0453-94427ad79b73@codeaurora.org> (raw)
In-Reply-To: <20190131003933.11436-4-bjorn.andersson@linaro.org>
Hey Bjorn,
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
On 01/31/2019 06:09 AM, Bjorn Andersson wrote:
> Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone
> based remoteproc, supporting booting these cores on e.g. the MTP, and
> enable the same for the MTP.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v4:
> - None
>
> Changes since v3:
> - Make xo reference the actual CXO clock
>
> arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 8 ++++
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 +++++++++++++++++++++++++
> 2 files changed, 66 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index af8c6a2445a2..02b8357c8ce8 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -48,6 +48,10 @@
> };
> };
>
> +&adsp_pas {
> + status = "okay";
> +};
> +
> &apps_rsc {
> pm8998-rpmh-regulators {
> compatible = "qcom,pm8998-rpmh-regulators";
> @@ -344,6 +348,10 @@
> };
> };
>
> +&cdsp_pas {
> + status = "okay";
> +};
> +
> &gcc {
> protected-clocks = <GCC_QSPI_CORE_CLK>,
> <GCC_QSPI_CORE_CLK_SRC>,
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index d19486ba1e5e..07d9cd6fba7d 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -325,6 +325,64 @@
> };
> };
>
> + adsp_pas: remoteproc-adsp {
> + compatible = "qcom,sdm845-adsp-pas";
> +
> + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + memory-region = <&adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
> + label = "lpass";
> + qcom,remote-pid = <2>;
> + mboxes = <&apss_shared 8>;
> + };
> + };
> +
> + cdsp_pas: remoteproc-cdsp {
> + compatible = "qcom,sdm845-cdsp-pas";
> +
> + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + memory-region = <&cdsp_mem>;
> +
> + qcom,smem-states = <&cdsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
> + label = "turing";
> + qcom,remote-pid = <5>;
> + mboxes = <&apss_shared 4>;
> + };
> + };
> +
> tcsr_mutex: hwlock {
> compatible = "qcom,tcsr-mutex";
> syscon = <&tcsr_mutex_regs 0 0x1000>;
>
--
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-02-01 5:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 0:39 [PATCH v5 00/10] Qualcomm AOSS QMP driver and modem dts Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 01/10] arm64: dts: qcom: sdm845: Update reserved memory map Bjorn Andersson
2019-01-31 16:58 ` Sibi Sankar
2019-01-31 0:39 ` [PATCH v5 02/10] arm64: dts: qcom: sdm845: Define rmtfs memory Bjorn Andersson
2019-01-31 17:09 ` Sibi Sankar
2019-01-31 0:39 ` [PATCH v5 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Bjorn Andersson
2019-02-01 5:49 ` Sibi Sankar [this message]
2019-02-01 23:54 ` Doug Anderson
2019-01-31 0:39 ` [PATCH v5 04/10] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 05/10] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-02-01 23:36 ` Doug Anderson
2019-02-06 1:33 ` Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 06/10] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-02-01 7:15 ` Sibi Sankar
2019-02-01 23:39 ` Doug Anderson
2019-01-31 0:39 ` [PATCH v5 07/10] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-31 4:51 ` Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 08/10] remoteproc: q6v5-mss: Active powerdomain for SDM845 Bjorn Andersson
2019-01-31 4:51 ` Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 09/10] arm64: dts: qcom: Add AOSS QMP node Bjorn Andersson
2019-02-01 7:17 ` Sibi Sankar
2019-01-31 0:39 ` [PATCH v5 10/10] arm64: dts: qcom: sdm845: Add Q6V5 MSS node Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4539b3ca-cace-9c71-0453-94427ad79b73@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=aneela@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome