Hi, Le lundi 08 décembre 2025 à 10:52 +0100, Benjamin Gaignard a écrit : > Testing V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF flag isn't enough > to know if cdef bit has to be set. > If any of the used cdef fields isn't zero then we must enable > cdef feature on the hardware. I think the problem goes the other way around. If all the fields of the CDEF parameters are zero (which is the default), then av1_enable_cdef register needs to be unset (despite the V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF possibly being set). Its interesting to note that the other AV1 decoder also ignores this flag. Though, I don't have enough data to add something to the doc to try and convince future driver writers to not use it. > > Signed-off-by: Benjamin Gaignard > Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder") This is missing: Reported-by: Jianfeng Liu Link: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4786 Please also include my Rb in v2 with correct commit message. Reviewed-by: Nicolas Dufresne Nicolas > --- >  .../platform/verisilicon/rockchip_vpu981_hw_av1_dec.c  | 10 ++++++++-- >  1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c b/drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c > index e4703bb6be7c..f4f7cb45b1f1 100644 > --- a/drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c > +++ b/drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c > @@ -1396,8 +1396,16 @@ static void rockchip_vpu981_av1_dec_set_cdef(struct hantro_ctx *ctx) >   u16 luma_sec_strength = 0; >   u32 chroma_pri_strength = 0; >   u16 chroma_sec_strength = 0; > + bool enable_cdef; >   int i; >   > + enable_cdef = !(cdef->bits == 0 && > + cdef->damping_minus_3 == 0 && > + cdef->y_pri_strength[0] == 0 && > + cdef->y_sec_strength[0] == 0 && > + cdef->uv_pri_strength[0] == 0 && > + cdef->uv_sec_strength[0] == 0); > + hantro_reg_write(vpu, &av1_enable_cdef, enable_cdef); >   hantro_reg_write(vpu, &av1_cdef_bits, cdef->bits); >   hantro_reg_write(vpu, &av1_cdef_damping, cdef->damping_minus_3); >   > @@ -1953,8 +1961,6 @@ static void rockchip_vpu981_av1_dec_set_parameters(struct hantro_ctx *ctx) >   !!(ctrls->frame->flags & V4L2_AV1_FRAME_FLAG_SHOW_FRAME)); >   hantro_reg_write(vpu, &av1_switchable_motion_mode, >   !!(ctrls->frame->flags & V4L2_AV1_FRAME_FLAG_IS_MOTION_MODE_SWITCHABLE)); > - hantro_reg_write(vpu, &av1_enable_cdef, > - !!(ctrls->sequence->flags & V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF)); >   hantro_reg_write(vpu, &av1_allow_masked_compound, >   !!(ctrls->sequence->flags >       & V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND));