From: Larry Finger <Larry.Finger@lwfinger.net>
To: LKML <linux-kernel@vger.kernel.org>
Subject: Need help with PCI-E interrupts
Date: Thu, 11 Jan 2007 13:55:32 -0600 [thread overview]
Message-ID: <45A69634.4090201@lwfinger.net> (raw)
I'm looking for help with PCI-E interrupts. The problem occurs with the following device:
01:00.0 Network controller: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 1363
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at c3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [d0] Express Legacy Endpoint IRQ 0
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
The card is recognized as of the PCI-E variety and appears to be set up properly, but interrupts are
not delivered to the driver as shown by the output of 'cat /proc/interrupts':
CPU0 CPU1
0: 4752 1884273 IO-APIC-edge timer
1: 21 6306 IO-APIC-edge i8042
8: 0 2 IO-APIC-edge rtc
9: 249 158866 IO-APIC-fasteoi acpi
12: 3670 846095 IO-APIC-edge i8042
15: 337 65615 IO-APIC-edge ide1
16: 1427 329891 IO-APIC-fasteoi libata
17: 2315 925273 IO-APIC-fasteoi eth0
18: 0 2 IO-APIC-fasteoi ohci1394
19: 3 117 IO-APIC-fasteoi HDA Intel
20: 0 0 IO-APIC-fasteoi ohci_hcd:usb1, bcm43xx
21: 0 0 IO-APIC-fasteoi ehci_hcd:usb2
NMI: 0 0
LOC: 1825978 1826429
ERR: 1
MIS: 0
I'm currently have an i386 system, but the problem is there with an x86_64 system. I've tried the
following boot-time fixups: acpi=noirq, irqfixup, irqpoll, pci=routeirq and a UP system without any
effect. It did work a couple of times with the x86_64 system, which made me think it was some kind
of race condition. I have also compared the bcm43xx code with that of the bcm43xx-d80211 version
that works, but I don't find any differences other than those related to design changes. I'm
currently working with 2.6.20-rc4, but get the same results with 2.6.18 and 2.6.19, which need a
PCI-E patch to recognize the card.
I would appreciate any suggestions regarding differences between PCI and PCI-E interrupts.
Thanks,
Larry
reply other threads:[~2007-01-11 19:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45A69634.4090201@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®