From: Ivan Babkin <ivan.babkin@miclab.chem.msu.ru>
To: linux-kernel@vger.kernel.org
Subject: Re: Experimental driver for Ricoh Bay1Controller SD Card readers
Date: Fri, 16 Feb 2007 01:34:40 +0300 [thread overview]
Message-ID: <45D4E000.6050403@miclab.chem.msu.ru> (raw)
Hi!
> Apart from that I did the following changes:
> - implemented suspend/resume support (not tested very much)
> - named the registers
> - fixed a bug that caused a major slowdown when modprobed without debug=1
> - added writting support (disabled by default, modprobe with write=1)
> Before you enable writting please make sure that you did a proper backup of
> the data on the card. Do not use this driver to save important data.
Thank for the job you've done!
Your driver works with 1 Gb sd-card (x86_64 suse's 2.16.18.2 kernel).
Read rate for me was around 250 Kb/s, write - 28 Kb/s (using dd utility).
BTW, I get continuous flow of "sdricoh_cs: timeout waiting for data"
messages in dmesg.
Good luck!
next reply other threads:[~2007-02-15 23:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-15 22:34 Ivan Babkin [this message]
2007-03-09 13:23 ` James
-- strict thread matches above, loose matches on Subject: below --
2007-01-06 23:32 Sascha Sommer
2007-01-07 9:56 ` Jiri Slaby
2007-02-11 20:22 ` Sascha Sommer
2007-02-13 5:47 ` Pierre Ossman
2007-02-13 9:48 ` Samuel Thibault
2007-02-13 11:42 ` Sascha Sommer
2007-01-09 20:57 ` Samuel Thibault
2007-01-10 20:10 ` Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45D4E000.6050403@miclab.chem.msu.ru \
--to=ivan.babkin@miclab.chem.msu.ru \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome