Re: [PATCH v8 0/5] media: iris: add support for purwa platform

[Wangao Wang <wangao.wang@oss.qualcomm.com>]

On 2026/6/4 14:48, Vikash Garodia wrote:
> Hi Bjorn,
> 
> On 5/29/2026 1:04 PM, Wangao Wang wrote:
>> This series enables the Iris video codec on purwa, allowing purwa to
>> use hardware‑accelerated video encoding and decoding.
>>
>> The Iris codec on purwa is nearly identical to the one on hamoa(X1E),
>> except that it requires one additional clock and uses a different OPP
>> table.
>>
>> Therefore, purwa can reuse the Iris node from hamoa, but the clocks
>> and OPP table need to be redefined.
>>
>> All patches have been tested with v4l2-compliance and v4l2-ctl on
>> purwa. And it does not affect existing targets.
>>
>> Dependencies:
>> https://lore.kernel.org/all/20260409-purwa-videocc-camcc- 
>> v4-0-5a8e5f2dd4b2@oss.qualcomm.com/
>>
> 
> <snip>
>>
>> ---
>> Wangao Wang (5):
>>        dt-bindings: media: qcom,sm8550-iris: Add X1P42100 compatible
>>        media: iris: Add hardware power on/off ops for X1P42100
>>        media: iris: Add platform data for X1P42100
>>        arm64: dts: qcom: purwa: Override Iris clocks and operating points
>>        arm64: dts: qcom: purwa-iot-som: enable video
>>
> 
> Media patches in this series are now applied. Do you plan to apply the 
> DTS ones ?
> 
> Regards,
> Vikash
> 

Hi Bjorn, is everything going well? If you encounter any issues, please 
feel free to give us feedback. Thank you.

-- 
Best Regards,
Wangao