From: Furong Xu <0x1207@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Joao Pinto <jpinto@synopsys.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, xfr@outlook.com, rock.xu@nio.com,
Furong Xu <0x1207@gmail.com>
Subject: [PATCH net-next v1 3/5] net: stmmac: support fp parameter of tc-taprio
Date: Wed, 31 Jul 2024 18:43:14 +0800 [thread overview]
Message-ID: <4603a4f68616ce41aca97bac2f55e5d51c865f53.1722421644.git.0x1207@gmail.com> (raw)
In-Reply-To: <cover.1722421644.git.0x1207@gmail.com>
tc-taprio can select whether traffic classes are express or preemptible.
After some traffic tests, MAC merge layer statistics are all good.
Local device:
ethtool --include-statistics --json --show-mm eth1
[ {
"ifname": "eth1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 0,
"MACMergeFragCountRx": 0,
"MACMergeFragCountTx": 1398,
"MACMergeHoldCount": 15783
}
} ]
Remote device:
ethtool --include-statistics --json --show-mm eth1
[ {
"ifname": "eth1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 1388,
"MACMergeFragCountRx": 1398,
"MACMergeFragCountTx": 0,
"MACMergeHoldCount": 0
}
} ]
Tested on DWMAC CORE 5.10a
Signed-off-by: Furong Xu <0x1207@gmail.com>
---
.../net/ethernet/stmicro/stmmac/stmmac_tc.c | 34 ++-----------------
1 file changed, 3 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 494fe2f68300..eeb5eb453b98 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -943,7 +943,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
u32 size, wid = priv->dma_cap.estwid, dep = priv->dma_cap.estdep;
struct timespec64 time, current_time, qopt_time;
ktime_t current_time_ns;
- bool fpe = false;
int i, ret = 0;
u64 ctr;
@@ -1028,16 +1027,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
switch (qopt->entries[i].command) {
case TC_TAPRIO_CMD_SET_GATES:
- if (fpe)
- return -EINVAL;
- break;
- case TC_TAPRIO_CMD_SET_AND_HOLD:
- gates |= BIT(0);
- fpe = true;
- break;
- case TC_TAPRIO_CMD_SET_AND_RELEASE:
- gates &= ~BIT(0);
- fpe = true;
break;
default:
return -EOPNOTSUPP;
@@ -1068,16 +1057,11 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
tc_taprio_map_maxsdu_txq(priv, qopt);
- if (fpe && !priv->dma_cap.fpesel) {
+ if (qopt->mqprio.preemptible_tcs && !priv->dma_cap.fpesel) {
mutex_unlock(&priv->est_lock);
return -EOPNOTSUPP;
}
- /* Actual FPE register configuration will be done after FPE handshake
- * is success.
- */
- priv->plat->fpe_cfg->enable = fpe;
-
ret = stmmac_est_configure(priv, priv, priv->est,
priv->plat->clk_ptp_rate);
mutex_unlock(&priv->est_lock);
@@ -1088,10 +1072,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
netdev_info(priv->dev, "configured EST\n");
- if (fpe) {
- stmmac_fpe_handshake(priv, true);
- netdev_info(priv->dev, "start FPE handshake\n");
- }
+ stmmac_fpe_set_preemptible_tcs(priv, priv->ioaddr, qopt->mqprio.preemptible_tcs);
return 0;
@@ -1109,16 +1090,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
mutex_unlock(&priv->est_lock);
}
- priv->plat->fpe_cfg->enable = false;
- stmmac_fpe_configure(priv, priv->ioaddr,
- priv->plat->fpe_cfg,
- priv->plat->tx_queues_to_use,
- priv->plat->rx_queues_to_use,
- false);
- netdev_info(priv->dev, "disabled FPE\n");
-
- stmmac_fpe_handshake(priv, false);
- netdev_info(priv->dev, "stop FPE handshake\n");
+ stmmac_fpe_set_preemptible_tcs(priv, priv->ioaddr, 0);
return ret;
}
--
2.34.1
next prev parent reply other threads:[~2024-07-31 10:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-31 10:43 [PATCH net-next v1 0/5] net: stmmac: FPE via ethtool + tc Furong Xu
2024-07-31 10:43 ` [PATCH net-next v1 1/5] net: stmmac: configure FPE via ethtool-mm Furong Xu
2024-08-01 20:04 ` Vladimir Oltean
2024-07-31 10:43 ` [PATCH net-next v1 2/5] net: stmmac: support fp parameter of tc-mqprio Furong Xu
2024-08-01 23:07 ` Vladimir Oltean
2024-07-31 10:43 ` Furong Xu [this message]
2024-08-01 23:16 ` [PATCH net-next v1 3/5] net: stmmac: support fp parameter of tc-taprio Vladimir Oltean
2024-08-01 23:29 ` Vladimir Oltean
2024-07-31 10:43 ` [PATCH net-next v1 4/5] net: stmmac: drop unneeded FPE handshake code Furong Xu
2024-07-31 10:43 ` [PATCH net-next v1 5/5] net: stmmac: silence FPE kernel logs Furong Xu
2024-08-01 16:02 ` [PATCH net-next v1 0/5] net: stmmac: FPE via ethtool + tc Vladimir Oltean
2024-08-01 16:17 ` Vladimir Oltean
2024-08-05 17:11 ` Serge Semin
2024-08-06 4:55 ` Furong Xu
2024-08-06 9:16 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4603a4f68616ce41aca97bac2f55e5d51c865f53.1722421644.git.0x1207@gmail.com \
--to=0x1207@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=jpinto@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=rock.xu@nio.com \
--cc=xfr@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®