Re: [PATCH] arm64: dts: mediatek: mt8173-evb: Add interrupts to DA9211 regulator

[Matthias Brugger <matthias.bgg@gmail.com>]

On 13/1/26 12:00, AngeloGioacchino Del Regno wrote:
> Add the required pinmux and assign the right interrupts-extended
> to the DA9211 regulator (PIO pin 15).
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
>   arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> index 51118a4149d8..1049877e6cda 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> @@ -117,6 +117,7 @@ &i2c1 {
>   	buck: da9211@68 {
>   		compatible = "dlg,da9211";
>   		reg = <0x68>;
> +		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
>   
>   		regulators {
>   			da9211_vcpu_reg: BUCKA {
> @@ -179,6 +180,13 @@ pins1 {
>   		};
>   	};
>   
> +	i2c1_pins_a: i2c1-pins {
> +		pins-da9211 {
> +			pinmux = <MT8173_PIN_15_EINT15__FUNC_GPIO15>;
> +			bias-pull-up;
> +		};
> +	};
> +
>   	mmc0_pins_default: mmc0-default-pins {
>   		pins-cmd-dat {
>   			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,