Re: [PATCH 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems

[Heiner Kallweit <hkallweit1@gmail.com>]

On 05.05.2019 22:51, Ruslan Babayev wrote:
> Lookup I2C adapter using the "i2c-bus" device property on ACPI based
> systems similar to how it's done with DT.
> 
> An example DSD describing an SFP on an ACPI based system:
> 
> Device (SFP0)
> {
>     Name (_HID, "PRP0001")
>     Name (_DSD, Package ()
>     {
>         ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
>         Package () {
>             Package () { "compatible", "sff,sfp" },
>             Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
>         },
>     })
> }
> 
> Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
> Cc: xe-linux-external@cisco.com
> ---
>  drivers/net/phy/sfp.c | 33 +++++++++++++++++++++++++--------
>  1 file changed, 25 insertions(+), 8 deletions(-)
> 
If we have a patch series touching more than one sub-system a typical
approach is:
- Send series to all persons / lists being responsible for the affected
  subsystems
- Maintainers will agree through which tree the series will go
- Maintainers of the other subsystems will ACK their respective patches
  of the series

I just received patch 2/2. The complete series (cover letter + two patches)
should have gone to i2c and phylib maintainers + lists.

As an additional hint regarding the commit message:
I suppose you added this code to support a specific device. Wouldn't hurt
if you mention which device it is.