Hi there!

I download git snapshots regularly. With kernels 2.6.23-rc1-git8 through 
git10 the machine
hung while booting the kernel, right after the message "Marking TSC 
unstable due to..."
With -git8 I didn't know how to debug the problem, so I used the 
previous kernel that worked.
After reading some mail lists posts, I tried passing "acpi=off" to 
git10, and it worked - no
hang during boot.

Attached is the kernel config used for 2.6.23-rc1-git10.

The machine that hangs while booting the kernel is an AMD Duron 900MHz, 
on an aging
ASUS A7V133-M mobo (VIA KT133 chipset).
Curiously, another, even older machine - K6-2 450, booted 
2.6.23-rc1-git8 without any
problems - without the need of "acpi=off".... using only the parameters 
I normally pass
to the kernel in order for it to work - it has some bad RAM, so I use 
memmap with this
older machine.

If more info is needed - mail me. And please Cc: me, because I am not 
subscribed to
the list.

Thanks!

-- 
Plamen Petrov, network administrator
Technical College - Silistra,
RU "Angel Kantchev"
http://tk.ru.acad.bg/
--------------------------------
this message is UTF8 encoded