Re: [PATCH v2 1/1] media: v4l: Don't turn on privacy LED if streamon fails

[Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>]

On 10/04/2024 14:47, Sakari Ailus wrote:
> Turn on the privacy LED only if streamon succeeds. This can be done after
> enabling streaming on the sensor.
> 
> Fixes: b6e10ff6c23d ("media: v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present")
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>   drivers/media/v4l2-core/v4l2-subdev.c | 22 ++++++++++++----------
>   1 file changed, 12 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
> index 4c6198c48dd6..012b757eac9f 100644
> --- a/drivers/media/v4l2-core/v4l2-subdev.c
> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
> @@ -412,15 +412,6 @@ static int call_s_stream(struct v4l2_subdev *sd, int enable)
>   	if (WARN_ON(!!sd->enabled_streams == !!enable))
>   		return 0;
>   
> -#if IS_REACHABLE(CONFIG_LEDS_CLASS)
> -	if (!IS_ERR_OR_NULL(sd->privacy_led)) {
> -		if (enable)
> -			led_set_brightness(sd->privacy_led,
> -					   sd->privacy_led->max_brightness);
> -		else
> -			led_set_brightness(sd->privacy_led, 0);
> -	}
> -#endif
>   	ret = sd->ops->video->s_stream(sd, enable);
>   
>   	if (!enable && ret < 0) {
> @@ -428,9 +419,20 @@ static int call_s_stream(struct v4l2_subdev *sd, int enable)
>   		ret = 0;
>   	}
>   
> -	if (!ret)
> +	if (!ret) {
>   		sd->enabled_streams = enable ? BIT(0) : 0;
>   
> +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
> +		if (!IS_ERR_OR_NULL(sd->privacy_led)) {
> +			if (enable)
> +				led_set_brightness(sd->privacy_led,
> +						   sd->privacy_led->max_brightness);
> +			else
> +				led_set_brightness(sd->privacy_led, 0);
> +		}
> +#endif
> +	}
> +
>   	return ret;
>   }
>   

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

  Tomi