From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3099C25760; Wed, 3 Jul 2024 08:45:57 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.180.131 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719996360; cv=none; b=G8zNuFm3gKFrlkTWocPdkWa5wxrIViIDiAaqeeHV1vWwE0lrAtgmibTaS0a8INUA8AmcVaqbA9DvHwHx+9UiR9cRRM/pQ5W07LfKAkOB8PYY+sitRtu4HX2XErevoqRG9MMvnE1J90vbQuMOd3/JOglqNPORn7PgcLr/5Yzlmo0= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719996360; c=relaxed/simple; bh=bZhEA+iG47w2bf25yT412zy1rl9nBPtfrbu/tWoKNyE=; h=Message-ID:Date:MIME-Version:Subject:To:CC:References:From: In-Reply-To:Content-Type; b=jybnV4RpgZjqV8xV85tgAdIr0pmjFnpzTc1xupTZXqnJSOEo+eTBzMqj1VQx0p6B/Tr1Vmke9rnkKB3br6LPMbRg2BT7uTRaaoef4MIVWy00T7Qm1AdY6JrnLHuPuDBK9vdTcIF7AZ4l2Z0sTRcX+7zDQ48081fi/vTO22REp+s= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=ZOc2j4p6; arc=none smtp.client-ip=205.220.180.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="ZOc2j4p6" Received: from pps.filterd (m0279871.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4638BF89004367; Wed, 3 Jul 2024 08:45:34 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= 65AdNJmaOOy1xs1euJzg4L5FklK/nivwqug56pwysDw=; b=ZOc2j4p6CygPKwuO 6ih9pQagG5J8I2x5YUlNoovYCeS7aGXF+WKsiraTpI8RU+fcvAkyXOi9MT8T/GV0 lyiS2KKsSrBPiW+F4VQhj1wHPTqjBB8sDmI5aw0DGXKXwXAn70Fqz+fdn7TuiW5a iX/J0V7M2kDcN1JxiUsrQT4TtVKnVAOidl7J+jpBLUeYuHMtu1VTkQV70G+DBhQL ijsep/2PGnZ5EsnycmW2QNEqfdbKAhI8TwkDJB2iojMCcopW9QQ5FHOdMQDcxx2i fzbAKrvVP1MCZVOs+1QkhM67myayw7OIzOQqgX+rVOhWQ1byyhDbxSoY5YHst12n QTkrgA== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 4029uxg7ty-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 03 Jul 2024 08:45:34 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.19/8.17.1.19) with ESMTPS id 4638jG5v022736 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 3 Jul 2024 08:45:16 GMT Received: from [10.214.67.37] (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Wed, 3 Jul 2024 01:45:11 -0700 Message-ID: <4731cfa1-60d6-4f2b-9740-88e546edbd6b@quicinc.com> Date: Wed, 3 Jul 2024 14:14:54 +0530 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [RFC V3 3/4] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor To: Sibi Sankar , , , , , , CC: , , , , , , Amir Vajid References: <20240702191440.2161623-1-quic_sibis@quicinc.com> <20240702191440.2161623-4-quic_sibis@quicinc.com> Content-Language: en-US From: Shivnandan Kumar In-Reply-To: <20240702191440.2161623-4-quic_sibis@quicinc.com> Content-Type: text/plain; charset="UTF-8"; format=flowed Content-Transfer-Encoding: 7bit X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: -eyxrNGuYRRBwWrOOARXzoTw5A4a5fAF X-Proofpoint-ORIG-GUID: -eyxrNGuYRRBwWrOOARXzoTw5A4a5fAF X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-07-03_04,2024-07-02_02,2024-05-17_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxlogscore=999 priorityscore=1501 impostorscore=0 bulkscore=0 spamscore=0 mlxscore=0 clxscore=1011 phishscore=0 malwarescore=0 adultscore=0 lowpriorityscore=0 suspectscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2406140001 definitions=main-2407030064 On 7/3/2024 12:44 AM, Sibi Sankar wrote: > Introduce a client driver that uses the memlat algorithm string hosted > on ARM SCMI QCOM Vendor Protocol to detect memory latency workloads and > control frequency/level of the various memory buses (DDR/LLCC/DDR_QOS). > > Co-developed-by: Shivnandan Kumar > Signed-off-by: Shivnandan Kumar > Co-developed-by: Ramakrishna Gottimukkula > Signed-off-by: Ramakrishna Gottimukkula > Co-developed-by: Amir Vajid > Signed-off-by: Amir Vajid > Signed-off-by: Sibi Sankar > --- > > V2: > * Make driver changes to the accommodate bindings changes. [Rob] > * Replace explicit of_node_put with _free. > > drivers/soc/qcom/Kconfig | 12 + > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/qcom_scmi_client.c | 583 ++++++++++++++++++++++++++++ > 3 files changed, 596 insertions(+) > create mode 100644 drivers/soc/qcom/qcom_scmi_client.c > > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig > index 432c85bd8ad4..b253504bd386 100644 > --- a/drivers/soc/qcom/Kconfig > +++ b/drivers/soc/qcom/Kconfig > @@ -294,4 +294,16 @@ config QCOM_PBS > This module provides the APIs to the client drivers that wants to send the > PBS trigger event to the PBS RAM. > > +config QCOM_SCMI_CLIENT > + tristate "Qualcomm Technologies Inc. SCMI client driver" > + depends on ARM_SCMI_PROTOCOL_VENDOR_QCOM || COMPILE_TEST > + default n > + help > + This driver uses the memlat algorithm string hosted on QCOM SCMI > + Vendor Protocol to detect memory latency workloads and control > + frequency/level of the various memory buses (DDR/LLCC/DDR_QOS). > + > + This driver defines/documents the parameter IDs used while configuring > + the memory buses. > + > endmenu > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > index d3560f861085..8a2e832d1d5d 100644 > --- a/drivers/soc/qcom/Makefile > +++ b/drivers/soc/qcom/Makefile > @@ -35,6 +35,7 @@ obj-$(CONFIG_QCOM_APR) += apr.o > obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o > obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o > obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o > +obj-$(CONFIG_QCOM_SCMI_CLIENT) += qcom_scmi_client.o > qcom_ice-objs += ice.o > obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o > obj-$(CONFIG_QCOM_PBS) += qcom-pbs.o > diff --git a/drivers/soc/qcom/qcom_scmi_client.c b/drivers/soc/qcom/qcom_scmi_client.c > new file mode 100644 > index 000000000000..8369b415c0ab > --- /dev/null > +++ b/drivers/soc/qcom/qcom_scmi_client.c > @@ -0,0 +1,583 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define MEMLAT_ALGO_STR 0x4D454D4C4154 /* MEMLAT */ > +#define INVALID_IDX 0xff > +#define MAX_MEMORY_TYPES 3 > +#define MAX_MONITOR_CNT 4 > +#define MAX_NAME_LEN 20 > +#define MAX_MAP_ENTRIES 7 > +#define CPUCP_DEFAULT_SAMPLING_PERIOD_MS 4 > +#define CPUCP_DEFAULT_FREQ_METHOD 1 > + > +/** > + * scmi_memlat_protocol_cmd - parameter_ids supported by the "MEMLAT" algo_str hosted > + * by the Qualcomm SCMI Vendor Protocol on the SCMI controller. > + * > + * MEMLAT (Memory Latency) monitors the counters to detect memory latency bound workloads > + * and scales the frequency/levels of the memory buses accordingly. > + * > + * @MEMLAT_SET_MEM_GROUP: initializes the frequency/level scaling functions for the memory bus. > + * @MEMLAT_SET_MONITOR: configures the monitor to work on a specific memory bus. > + * @MEMLAT_SET_COMMON_EV_MAP: set up common counters used to monitor the cpu frequency. > + * @MEMLAT_SET_GRP_EV_MAP: set up any specific counters used to monitor the memory bus. > + * @MEMLAT_IPM_CEIL: set the IPM (Instruction Per Misses) ceiling per monitor. > + * @MEMLAT_SAMPLE_MS: set the sampling period for all the monitors. > + * MEMLAT_MON_FREQ_MAP: setup the cpufreq to memfreq map. > + * MEMLAT_SET_MIN_FREQ: set the max frequency of the memory bus. > + * MEMLAT_SET_MAX_FREQ: set the min frequency of the memory bus. > + * MEMLAT_START_TIMER: start all the monitors with the requested sampling period. > + * MEMLAT_START_TIMER: stop all the running monitors. Typo above, it should be MEMLAT_STOP_TIMER > + * MEMLAT_SET_EFFECTIVE_FREQ_METHOD: set the method used to determine cpu frequency. > + */ > +enum scmi_memlat_protocol_cmd { > + MEMLAT_SET_MEM_GROUP = 16, > + MEMLAT_SET_MONITOR, > + MEMLAT_SET_COMMON_EV_MAP, > + MEMLAT_SET_GRP_EV_MAP, > + MEMLAT_IPM_CEIL = 23, > + MEMLAT_SAMPLE_MS = 31, > + MEMLAT_MON_FREQ_MAP, > + MEMLAT_SET_MIN_FREQ, > + MEMLAT_SET_MAX_FREQ, > + MEMLAT_START_TIMER = 36, > + MEMLAT_STOP_TIMER, > + MEMLAT_SET_EFFECTIVE_FREQ_METHOD = 39, > +}; > + > +struct map_table { > + u16 v1; > + u16 v2; > +}; > + > +struct map_param_msg { > + u32 hw_type; > + u32 mon_idx; > + u32 nr_rows; > + struct map_table tbl[MAX_MAP_ENTRIES]; > +} __packed; > + > +struct node_msg { > + u32 cpumask; > + u32 hw_type; > + u32 mon_type; > + u32 mon_idx; > + char mon_name[MAX_NAME_LEN]; > +}; > + > +struct scalar_param_msg { > + u32 hw_type; > + u32 mon_idx; > + u32 val; > +}; > + > +enum common_ev_idx { > + INST_IDX, > + CYC_IDX, > + CONST_CYC_IDX, > + FE_STALL_IDX, > + BE_STALL_IDX, > + NUM_COMMON_EVS > +}; > + > +enum grp_ev_idx { > + MISS_IDX, > + WB_IDX, > + ACC_IDX, > + NUM_GRP_EVS > +}; > + > +#define EV_CPU_CYCLES 0 > +#define EV_INST_RETIRED 2 > +#define EV_L2_D_RFILL 5 > + > +struct ev_map_msg { > + u32 num_evs; > + u32 hw_type; > + u32 cid[NUM_COMMON_EVS]; > +}; > + > +struct cpufreq_memfreq_map { > + unsigned int cpufreq_mhz; > + unsigned int memfreq_khz; > +}; > + > +struct scmi_monitor_info { > + struct cpufreq_memfreq_map *freq_map; > + char mon_name[MAX_NAME_LEN]; > + u32 mon_idx; > + u32 mon_type; > + u32 ipm_ceil; > + u32 mask; > + u32 freq_map_len; > +}; > + > +struct scmi_memory_info { > + struct scmi_monitor_info *monitor[MAX_MONITOR_CNT]; > + u32 hw_type; > + int monitor_cnt; > + u32 min_freq; > + u32 max_freq; > +}; > + > +struct scmi_memlat_info { > + struct scmi_protocol_handle *ph; > + const struct qcom_scmi_vendor_ops *ops; > + struct scmi_memory_info *memory[MAX_MEMORY_TYPES]; > + u32 cluster_info[NR_CPUS]; > + int memory_cnt; > +}; > + > +static int populate_cluster_info(u32 *cluster_info) > +{ > + char name[MAX_NAME_LEN]; > + int i = 0; > + > + struct device_node *cn __free(device_node) = of_find_node_by_path("/cpus"); > + if (!cn) > + return -ENODEV; > + > + struct device_node *map __free(device_node) = of_get_child_by_name(cn, "cpu-map"); > + if (!map) > + return -ENODEV; > + > + do { > + snprintf(name, sizeof(name), "cluster%d", i); > + struct device_node *c __free(device_node) = of_get_child_by_name(map, name); > + if (!c) > + break; > + > + *(cluster_info + i) = of_get_child_count(c); > + i++; > + } while (1); > + > + return 0; > +} > + > +static int populate_physical_mask(struct device_node *np, u32 *mask, u32 *cluster_info) > +{ > + struct device_node *dev_phandle; > + int cpu, i = 0, physical_id; > + > + do { > + dev_phandle = of_parse_phandle(np, "cpus", i++); > + cpu = of_cpu_node_to_id(dev_phandle); > + if (cpu != -ENODEV) { > + physical_id = topology_core_id(cpu); > + for (int j = 0; j < topology_cluster_id(cpu); j++) > + physical_id += *(cluster_info + j); > + *mask |= BIT(physical_id); > + } > + } while (dev_phandle); > + > + return 0; > +} > + > +static struct cpufreq_memfreq_map *init_cpufreq_memfreq_map(struct device *dev, > + struct scmi_memory_info *memory, > + struct device_node *of_node, > + u32 *cnt) > +{ > + struct device_node *tbl_np, *opp_np; > + struct cpufreq_memfreq_map *tbl; > + int ret, i = 0; > + u32 level, len; > + u64 rate; > + > + tbl_np = of_parse_phandle(of_node, "operating-points-v2", 0); > + if (!tbl_np) > + return ERR_PTR(-ENODEV); > + > + len = min(of_get_available_child_count(tbl_np), MAX_MAP_ENTRIES); > + if (len == 0) > + return ERR_PTR(-ENODEV); > + > + tbl = devm_kzalloc(dev, (len + 1) * sizeof(struct cpufreq_memfreq_map), > + GFP_KERNEL); > + if (!tbl) > + return ERR_PTR(-ENOMEM); > + > + for_each_available_child_of_node(tbl_np, opp_np) { > + ret = of_property_read_u64_index(opp_np, "opp-hz", 0, &rate); > + if (ret < 0) > + return ERR_PTR(ret); > + > + tbl[i].cpufreq_mhz = rate / HZ_PER_MHZ; > + > + if (memory->hw_type != QCOM_MEM_TYPE_DDR_QOS) { > + ret = of_property_read_u64_index(opp_np, "opp-hz", 1, &rate); > + if (ret < 0) > + return ERR_PTR(ret); > + > + tbl[i].memfreq_khz = rate / HZ_PER_KHZ; > + } else { > + ret = of_property_read_u32(opp_np, "opp-level", &level); > + if (ret < 0) > + return ERR_PTR(ret); > + > + tbl[i].memfreq_khz = level; > + } > + > + dev_dbg(dev, "Entry%d CPU:%u, Mem:%u\n", i, tbl[i].cpufreq_mhz, tbl[i].memfreq_khz); > + i++; > + } > + *cnt = len; > + tbl[i].cpufreq_mhz = 0; This is not needed as for allocating memory, devm_kzalloc is used. > + > + return tbl; > +} > + > +static int process_scmi_memlat_of_node(struct scmi_device *sdev, struct scmi_memlat_info *info) > +{ > + struct scmi_monitor_info *monitor; > + struct scmi_memory_info *memory; > + char name[MAX_NAME_LEN]; > + u64 memfreq[2]; > + int ret; > + > + ret = populate_cluster_info(info->cluster_info); > + if (ret < 0) { > + dev_err_probe(&sdev->dev, ret, "failed to populate cluster info\n"); > + goto err; > + } > + > + of_node_get(sdev->handle->dev->of_node); > + do { > + snprintf(name, sizeof(name), "memory-%d", info->memory_cnt); > + struct device_node *memory_np __free(device_node) = > + of_find_node_by_name(sdev->handle->dev->of_node, name); > + > + if (!memory_np) > + break; > + > + memory = devm_kzalloc(&sdev->dev, sizeof(*memory), GFP_KERNEL); > + if (!memory) { > + ret = -ENOMEM; > + goto err; > + } > + > + ret = of_property_read_u32(memory_np, "qcom,memory-type", &memory->hw_type); > + if (ret) { > + dev_err_probe(&sdev->dev, ret, "failed to read memory type\n"); > + goto err; > + } > + > + ret = of_property_read_u64_array(memory_np, "freq-table-hz", memfreq, 2); > + if (ret && (ret != -EINVAL)) { > + dev_err_probe(&sdev->dev, ret, "failed to read min/max freq\n"); > + goto err; > + } > + > + if (memory->hw_type != QCOM_MEM_TYPE_DDR_QOS) { > + memory->min_freq = memfreq[0] / HZ_PER_KHZ; > + memory->max_freq = memfreq[1] / HZ_PER_KHZ; > + } else { > + memory->min_freq = memfreq[0]; > + memory->max_freq = memfreq[1]; > + } > + info->memory[info->memory_cnt++] = memory; > + > + do { > + snprintf(name, sizeof(name), "monitor-%d", memory->monitor_cnt); > + struct device_node *monitor_np __free(device_node) = > + of_get_child_by_name(memory_np, name); > + > + if (!monitor_np) > + break; > + > + monitor = devm_kzalloc(&sdev->dev, sizeof(*monitor), GFP_KERNEL); > + if (!monitor) { > + ret = -ENOMEM; > + goto err; > + } > + > + monitor->mon_type = of_property_read_bool(monitor_np, "qcom,compute-type"); > + if (!monitor->mon_type) { > + ret = of_property_read_u32(monitor_np, "qcom,ipm-ceil", > + &monitor->ipm_ceil); > + if (ret) { > + dev_err_probe(&sdev->dev, ret, > + "failed to read IPM ceiling\n"); > + goto err; > + } > + } > + > + /* > + * Variants of the SoC having reduced number of cpus operate > + * with the same number of logical cpus but the physical > + * cpu disabled will differ between parts. Calculate the > + * physical cpu number using cluster information instead. > + */ > + ret = populate_physical_mask(monitor_np, &monitor->mask, > + info->cluster_info); > + if (ret < 0) { > + dev_err_probe(&sdev->dev, ret, "failed to populate cpu mask\n"); > + goto err; > + } > + Above error check is not needed as populate_physical_mask always return 0. > + monitor->freq_map = init_cpufreq_memfreq_map(&sdev->dev, memory, monitor_np, > + &monitor->freq_map_len); > + if (IS_ERR(monitor->freq_map)) { > + dev_err_probe(&sdev->dev, PTR_ERR(monitor->freq_map), > + "failed to populate cpufreq-memfreq map\n"); > + goto err; > + } > + > + strscpy(monitor->mon_name, name, sizeof(monitor->mon_name)); > + monitor->mon_idx = memory->monitor_cnt; > + > + memory->monitor[memory->monitor_cnt++] = monitor; If from dt, more than 4 monitor are passed then this may lead to overflow, adding a check and giving warning in case number of monitor exceeds MAX_MONITOR_CNT will be better idea. > + } while (1); > + > + if (!memory->monitor_cnt) { > + ret = -EINVAL; > + dev_err_probe(&sdev->dev, ret, "failed to find monitor nodes\n"); > + goto err; > + } > + } while (1); > + > + if (!info->memory_cnt) { > + ret = -EINVAL; > + dev_err_probe(&sdev->dev, ret, "failed to find memory nodes\n"); > + } > + > +err: > + of_node_put(sdev->handle->dev->of_node); > + > + return ret; > +} > + > +static int configure_cpucp_common_events(struct scmi_memlat_info *info) > +{ > + const struct qcom_scmi_vendor_ops *ops = info->ops; > + u8 ev_map[NUM_COMMON_EVS]; > + struct ev_map_msg msg; > + int ret; > + > + memset(ev_map, 0xFF, NUM_COMMON_EVS); > + > + msg.num_evs = NUM_COMMON_EVS; > + msg.hw_type = INVALID_IDX; > + msg.cid[INST_IDX] = EV_INST_RETIRED; > + msg.cid[CYC_IDX] = EV_CPU_CYCLES; > + msg.cid[CONST_CYC_IDX] = INVALID_IDX; > + msg.cid[FE_STALL_IDX] = INVALID_IDX; > + msg.cid[BE_STALL_IDX] = INVALID_IDX; > + > + ret = ops->set_param(info->ph, &msg, MEMLAT_ALGO_STR, MEMLAT_SET_COMMON_EV_MAP, > + sizeof(msg)); > + return ret; > +} > + > +static int configure_cpucp_grp(struct device *dev, struct scmi_memlat_info *info, int memory_index) > +{ > + const struct qcom_scmi_vendor_ops *ops = info->ops; > + struct scmi_memory_info *memory = info->memory[memory_index]; > + struct ev_map_msg ev_msg; > + u8 ev_map[NUM_GRP_EVS]; > + struct node_msg msg; > + int ret; > + > + msg.cpumask = 0; > + msg.hw_type = memory->hw_type; > + msg.mon_type = 0; > + msg.mon_idx = 0; > + ret = ops->set_param(info->ph, &msg, MEMLAT_ALGO_STR, MEMLAT_SET_MEM_GROUP, sizeof(msg)); > + if (ret < 0) { > + dev_err_probe(dev, ret, "failed to configure mem type %d\n", memory->hw_type); > + return ret; > + } > + > + memset(ev_map, 0xFF, NUM_GRP_EVS); > + ev_msg.num_evs = NUM_GRP_EVS; > + ev_msg.hw_type = memory->hw_type; > + ev_msg.cid[MISS_IDX] = EV_L2_D_RFILL; > + ev_msg.cid[WB_IDX] = INVALID_IDX; > + ev_msg.cid[ACC_IDX] = INVALID_IDX; > + ret = ops->set_param(info->ph, &ev_msg, MEMLAT_ALGO_STR, MEMLAT_SET_GRP_EV_MAP, > + sizeof(ev_msg)); > + if (ret < 0) { > + dev_err_probe(dev, ret, > + "failed to configure event map for mem type %d\n", memory->hw_type); > + return ret; > + } > + > + return ret; > +} > + > +static int configure_cpucp_mon(struct device *dev, struct scmi_memlat_info *info, > + int memory_index, int monitor_index) > +{ > + const struct qcom_scmi_vendor_ops *ops = info->ops; > + struct scmi_memory_info *memory = info->memory[memory_index]; > + struct scmi_monitor_info *monitor = memory->monitor[monitor_index]; > + struct scalar_param_msg scalar_msg; > + struct map_param_msg map_msg; > + struct node_msg msg; > + int ret; > + int i; > + > + msg.cpumask = monitor->mask; > + msg.hw_type = memory->hw_type; > + msg.mon_type = monitor->mon_type; > + msg.mon_idx = monitor->mon_idx; > + strscpy(msg.mon_name, monitor->mon_name, sizeof(msg.mon_name)); > + ret = ops->set_param(info->ph, &msg, MEMLAT_ALGO_STR, MEMLAT_SET_MONITOR, sizeof(msg)); > + if (ret < 0) { > + dev_err_probe(dev, ret, "failed to configure monitor %s\n", monitor->mon_name); > + return ret; > + } > + > + scalar_msg.hw_type = memory->hw_type; > + scalar_msg.mon_idx = monitor->mon_idx; > + scalar_msg.val = monitor->ipm_ceil; > + ret = ops->set_param(info->ph, &scalar_msg, MEMLAT_ALGO_STR, MEMLAT_IPM_CEIL, > + sizeof(scalar_msg)); > + if (ret < 0) { > + dev_err_probe(dev, ret, "failed to set ipm ceil for %s\n", monitor->mon_name); > + return ret; > + } > + > + map_msg.hw_type = memory->hw_type; > + map_msg.mon_idx = monitor->mon_idx; > + map_msg.nr_rows = monitor->freq_map_len; > + for (i = 0; i < monitor->freq_map_len; i++) { > + map_msg.tbl[i].v1 = monitor->freq_map[i].cpufreq_mhz; > + map_msg.tbl[i].v2 = monitor->freq_map[i].memfreq_khz; > + } > + ret = ops->set_param(info->ph, &map_msg, MEMLAT_ALGO_STR, MEMLAT_MON_FREQ_MAP, > + sizeof(map_msg)); > + if (ret < 0) { > + dev_err_probe(dev, ret, "failed to configure freq_map for %s\n", monitor->mon_name); > + return ret; > + } > + > + scalar_msg.hw_type = memory->hw_type; > + scalar_msg.mon_idx = monitor->mon_idx; > + scalar_msg.val = memory->min_freq; > + ret = ops->set_param(info->ph, &scalar_msg, MEMLAT_ALGO_STR, MEMLAT_SET_MIN_FREQ, > + sizeof(scalar_msg)); > + if (ret < 0) { > + dev_err_probe(dev, ret, "failed to set min_freq for %s\n", monitor->mon_name); > + return ret; > + } > + > + scalar_msg.hw_type = memory->hw_type; > + scalar_msg.mon_idx = monitor->mon_idx; > + scalar_msg.val = memory->max_freq; > + ret = ops->set_param(info->ph, &scalar_msg, MEMLAT_ALGO_STR, MEMLAT_SET_MAX_FREQ, > + sizeof(scalar_msg)); > + if (ret < 0) > + dev_err_probe(dev, ret, "failed to set max_freq for %s\n", monitor->mon_name); > + > + return ret; > +} > + > +static int cpucp_memlat_init(struct scmi_device *sdev) > +{ > + const struct scmi_handle *handle = sdev->handle; > + const struct qcom_scmi_vendor_ops *ops; > + struct scmi_protocol_handle *ph; > + struct scmi_memlat_info *info; > + u32 cpucp_freq_method = CPUCP_DEFAULT_FREQ_METHOD; > + u32 cpucp_sample_ms = CPUCP_DEFAULT_SAMPLING_PERIOD_MS; > + int ret, i, j; > + > + if (!handle) > + return -ENODEV; > + > + ops = handle->devm_protocol_get(sdev, QCOM_SCMI_VENDOR_PROTOCOL, &ph); > + if (IS_ERR(ops)) > + return PTR_ERR(ops); > + > + info = devm_kzalloc(&sdev->dev, sizeof(*info), GFP_KERNEL); > + if (!info) > + return -ENOMEM; > + > + ret = process_scmi_memlat_of_node(sdev, info); > + if (ret) > + return ret; > + > + info->ph = ph; > + info->ops = ops; > + > + /* Configure common events ids */ > + ret = configure_cpucp_common_events(info); > + if (ret < 0) { > + dev_err_probe(&sdev->dev, ret, "failed to configure common events\n"); > + return ret; > + } > + > + for (i = 0; i < info->memory_cnt; i++) { > + /* Configure per group parameters */ > + ret = configure_cpucp_grp(&sdev->dev, info, i); > + if (ret < 0) > + return ret; > + > + for (j = 0; j < info->memory[i]->monitor_cnt; j++) { > + /* Configure per monitor parameters */ > + ret = configure_cpucp_mon(&sdev->dev, info, i, j); > + if (ret < 0) > + return ret; > + } > + } > + > + /* Set loop sampling time */ > + ret = ops->set_param(ph, &cpucp_sample_ms, MEMLAT_ALGO_STR, MEMLAT_SAMPLE_MS, > + sizeof(cpucp_sample_ms)); > + if (ret < 0) { > + dev_err_probe(&sdev->dev, ret, "failed to set sample_ms\n"); > + return ret; > + } > + > + /* Set the effective cpu frequency calculation method */ > + ret = ops->set_param(ph, &cpucp_freq_method, MEMLAT_ALGO_STR, > + MEMLAT_SET_EFFECTIVE_FREQ_METHOD, sizeof(cpucp_freq_method)); > + if (ret < 0) { > + dev_err_probe(&sdev->dev, ret, "failed to set effective frequency calc method\n"); > + return ret; > + } > + > + /* Start sampling and voting timer */ > + ret = ops->start_activity(ph, NULL, MEMLAT_ALGO_STR, MEMLAT_START_TIMER, 0); > + if (ret < 0) > + dev_err_probe(&sdev->dev, ret, "failed to start memory group timer\n"); > + > + return ret; > +} > + > +static int scmi_client_probe(struct scmi_device *sdev) > +{ > + return cpucp_memlat_init(sdev); > +} > + > +static const struct scmi_device_id scmi_id_table[] = { > + { .protocol_id = QCOM_SCMI_VENDOR_PROTOCOL, .name = "qcom_scmi_vendor_protocol" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(scmi, scmi_id_table); > + > +static struct scmi_driver qcom_scmi_client_drv = { > + .name = "qcom-scmi-driver", > + .probe = scmi_client_probe, > + .id_table = scmi_id_table, > +}; > +module_scmi_driver(qcom_scmi_client_drv); > + > +MODULE_DESCRIPTION("QTI SCMI client driver"); > +MODULE_LICENSE("GPL");